提案製品

Product Family suggestions

がカートに正常に追加されました
カートを表示

通知

すべて既読にする
Mobile Menu

Top Notch®ねじ切りおよび溝入れ

フィルタを選択
Filters
フィルタ
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (14)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (14)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (14)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (14)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (14)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (14)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (14)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (14)
  • M Stainless Steel (14)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (14)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (14)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (14)
  • K Cast Iron (14)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (14)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (14)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (14)
  • N Non-Ferrous Materials (14)
    • N1
      Wrought Aluminum
      (14)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (14)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (14)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (14)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (14)
    • N6
      Carbon, Graphite Composites, CFRP
      (14)
    • N7
      MMC's
      (14)
  • S High-Temp Alloys (14)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (14)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (14)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (14)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (14)
  • H Hardened Materials (14)
    • H1
      Hardened Materials 44-48 HRC
      (14)
    • H2
      Hardened Materials 48-55 HRC
      (14)
    • H3
      Hardened Materials 56-60 HRC
      (10)
    • H4
      Hardened Materials >60 HRC
      (10)
Applications
Applications
  • Chamfer Turning Chamfer Turning (6)
  • Cut-Off Cut-Off (6)
  • Deep Grooving Deep Grooving (6)
  • Face Grooving Face Grooving (6)
  • Facing Facing (14)
  • Grooving Grooving (12)
  • ID Grooving ID Grooving (2)
  • ID Thread Turning ID Thread Turning (6)
  • Multiple Direction Cutting Multiple Direction Cutting (6)
  • OD Thread Turning OD Thread Turning (12)
  • Plunge Turning Plunge Turning (6)
  • Profiling Profiling (6)
  • TRN Boring TRN Boring (8)
  • Threading Threading (6)
  • Turning Turning (14)
Type of Thread
Type of Thread
  • 60 (14)
  • ACME (10)
  • API (10)
  • API RD (6)
  • BSW (6)
  • BUTTRESS (14)
  • M (8)
  • NPT (6)
  • STUB ACME (6)
  • UN (14)
  • UNJ (6)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (14)
  • Lightly Interrupted Cut (14)
  • Smooth Cut (14)
  • Varying Depth of Cut (14)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (2)
  • 90.0 (12)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (8)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (14)
  • 2.0 (14)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (6)
  • 0.003 in (14)
  • 0.004 in (10)
  • 0.005 in (6)
  • 0.006 in (10)
  • 0.007 in (12)
  • 0.008 in (14)
  • 0.01 in (12)
  • 0.011 in (6)
  • 0.012 in (6)
  • 0.014 in (10)
  • 0.016 in (6)
  • 0.017 in (6)
  • 0.019 in (10)
  • 0.02 in (10)
  • 0.023 in (10)
  • 0.03 in (4)
  • 0.031 in (10)
  • 0.035 in (10)
  • 0.039 in (10)
  • 0.047 in (10)
  • 0.049 in (10)
  • 0.06 in (10)
  • 0.062 in (6)
  • 0.063 in (14)
  • 0.069 in (10)
  • 0.078 in (6)
  • 0.079 in (10)
  • 0.089 in (10)
  • 0.095 in (10)
  • 0.098 in (4)
  • 0.125 in (4)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (6)
  • 0.076 mm (14)
  • 0.1 mm (10)
  • 0.125 mm (6)
  • 0.151 mm (10)
  • 0.176 mm (12)
  • 0.2 mm (14)
  • 0.225 mm (6)
  • 0.25 mm (12)
  • 0.275 mm (6)
  • 0.301 mm (6)
  • 0.325 mm (10)
  • 0.351 mm (10)
  • 0.4 mm (6)
  • 0.426 mm (6)
  • 0.45 mm (10)
  • 0.476 mm (3)
  • 0.5 mm (10)
  • 0.576 mm (10)
  • 0.75 mm (4)
  • 0.775 mm (10)
  • 0.9 mm (10)
  • 1.0 mm (10)
  • 1.201 mm (10)
  • 1.25 mm (10)
  • 1.5 mm (10)
  • 1.576 mm (6)
  • 1.6 mm (14)
  • 1.75 mm (10)
  • 1.975 mm (6)
  • 2.0 mm (10)
  • 2.25 mm (10)
  • 2.401 mm (10)
  • 2.5 mm (4)
  • 3.176 mm (4)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K2885 (10)
  • K313 (14)
  • K420 (14)
  • K4H (8)
  • K68 (14)
  • KB1345 (10)
  • KB1630 (10)
  • KB5625 (6)
  • KBH20 (3)
  • KC250 (10)
  • KC5010 (14)
  • KC5025 (14)
  • KC5410 (14)
  • KC710 (14)
  • KC720 (14)
  • KC722 (14)
  • KC730 (14)
  • KC732 (6)
  • KC810 (14)
  • KC850 (14)
  • KC910 (8)
  • KC9110 (14)
  • KC9120 (6)
  • KC9320 (14)
  • KC935 (14)
  • KC950 (14)
  • KCK20 (12)
  • KCK20B (14)
  • KCP10B (14)
  • KCP25B (14)
  • KCU10 (14)
  • KCU25 (14)
  • KD050 (3)
  • KD081 (6)
  • KD100 (8)
  • KD120 (10)
  • KD1425 (6)
  • KT175 (10)
  • KT315 (14)
  • KU10T (14)
  • KU25T (14)
  • KU30T (14)
  • KY3000 (10)
  • THM (10)
  • TN10P (10)
  • TN6010 (14)
  • TN6025 (14)
  • TN7110 (14)
  • WU10HT (3)
  • WU10PT (6)
  • WU25PT (3)
Hand Of Tool
Hand Of Tool
  • L (4)
  • R (4)
F Dimension
F Dimension
  • 27.0 mm (8)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 1.063 in (8)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (6)
  • 41.301 mm (2)
  • 47.6 mm (2)
  • 54.0 mm (8)
  • 56.625 mm (2)
  • 57.2 mm (2)
  • 88.9 mm (4)
  • 139.701 mm (2)
  • 174.601 mm (2)
  • 209.601 mm (2)
  • 222.3 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (6)
  • 1.627 in (2)
  • 1.874 in (2)
  • 2.126 in (8)
  • 2.229 in (2)
  • 2.253 in (2)
  • 3.5 in (4)
  • 5.5 in (2)
  • 6.875 in (2)
  • 8.252 in (2)
  • 8.752 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (6)
  • S (2)
Rake Angle Style
Rake Angle Style
  • NEUTRAL (ZERO) (8)
Maximum Bore Depth
Maximum Bore Depth
  • 1.575 in (6)
  • 1.772 in (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 40.0 mm (6)
  • 45.0 mm (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (2)
frontEnd
Cutting Width
Cutting Width
  • 0.02 in (4)
  • 0.031 in (4)
  • 0.035 in (4)
  • 0.039 in (10)
  • 0.041 in (4)
  • 0.047 in (10)
  • 0.055 in (4)
  • 0.058 in (4)
  • 0.06 in (10)
  • 0.061 in (2)
  • 0.062 in (10)
  • 0.067 in (4)
  • 0.069 in (10)
  • 0.073 in (6)
  • 0.077 in (4)
  • 0.078 in (6)
  • 0.079 in (10)
  • 0.088 in (10)
  • 0.089 in (10)
  • 0.095 in (10)
  • 0.097 in (6)
  • 0.098 in (10)
  • 0.105 in (6)
  • 0.108 in (10)
  • 0.11 in (6)
  • 0.119 in (14)
  • 0.122 in (6)
  • 0.125 in (14)
  • 0.126 in (14)
  • 0.128 in (10)
  • 0.129 in (4)
  • 0.131 in (3)
  • 0.138 in (14)
  • 0.143 in (6)
  • 0.147 in (2)
  • 0.15 in (4)
  • 0.152 in (4)
  • 0.156 in (6)
  • 0.157 in (10)
  • 0.167 in (10)
  • 0.169 in (6)
  • 0.177 in (10)
  • 0.178 in (6)
  • 0.181 in (3)
  • 0.185 in (8)
  • 0.188 in (10)
  • 0.189 in (10)
  • 0.192 in (3)
  • 0.193 in (3)
  • 0.195 in (6)
  • 0.197 in (4)
  • 0.202 in (4)
  • 0.213 in (4)
  • 0.217 in (4)
  • 0.219 in (4)
  • 0.237 in (4)
  • 0.25 in (4)
  • 0.255 in (4)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (4)
  • 0.775 mm (4)
  • 0.8 mm (4)
  • 0.9 mm (4)
  • 1.0 mm (10)
  • 1.05 mm (4)
  • 1.201 mm (10)
  • 1.401 mm (4)
  • 1.475 mm (4)
  • 1.5 mm (10)
  • 1.55 mm (2)
  • 1.576 mm (10)
  • 1.701 mm (4)
  • 1.75 mm (10)
  • 1.826 mm (6)
  • 1.951 mm (4)
  • 1.975 mm (6)
  • 2.0 mm (10)
  • 2.2 mm (10)
  • 2.225 mm (10)
  • 2.25 mm (10)
  • 2.401 mm (10)
  • 2.475 mm (6)
  • 2.5 mm (10)
  • 2.676 mm (6)
  • 2.75 mm (10)
  • 2.801 mm (6)
  • 3.0 mm (14)
  • 3.1 mm (6)
  • 3.176 mm (14)
  • 3.2 mm (14)
  • 3.25 mm (10)
  • 3.276 mm (4)
  • 3.325 mm (3)
  • 3.5 mm (14)
  • 3.6 mm (6)
  • 3.725 mm (2)
  • 3.801 mm (4)
  • 3.85 mm (4)
  • 3.95 mm (6)
  • 3.975 mm (3)
  • 4.0 mm (10)
  • 4.25 mm (10)
  • 4.3 mm (6)
  • 4.5 mm (10)
  • 4.525 mm (6)
  • 4.601 mm (3)
  • 4.7 mm (8)
  • 4.775 mm (10)
  • 4.801 mm (10)
  • 4.875 mm (3)
  • 4.9 mm (3)
  • 4.95 mm (6)
  • 5.0 mm (4)
  • 5.125 mm (4)
  • 5.4 mm (4)
  • 5.5 mm (4)
  • 5.575 mm (4)
  • 6.0 mm (4)
  • 6.351 mm (4)
  • 6.476 mm (4)
Cutting Width Min to Cutting Width Max
Insert Size
Insert Size
  • 2 (4)
  • 3 (6)
  • 4 (4)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.138 in (2)
  • 0.294 in (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 3.5 mm (2)
  • 7.476 mm (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (10)
  • B L (6)
  • C N (10)
  • D P (8)
  • H T (14)
  • H W (14)
backEnd
Connection Type
Connection Type
  • TAPER SHANK (8)
System Size
System Size
  • KM40TS (8)
No filters matching ""
製品を表示
メートル
インチ

オリジナル製品

NR 45° NR 45°

Top Notch™ねじ切りおよび溝入れ • KM40TS™切削ユニット
(2 Products)
製品を表示
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
3902288 KM40TSNRL3045M KM40TSNRL3045M 45.0000 1.772 27.0000 1.063 54.0000 2.126 NU3R 0.33 0.74
    定価:
    $273.11 /各
    価格::
    3902289 KM40TSNRR3045M KM40TSNRR3045M 45.0000 1.772 27.0000 1.063 54.0000 2.126 NU3L 0.34 0.75
      定価:
      $273.11 /各
      価格::
      定価:
      割引: %
      価格::
      配置転換 この品目はありません
      交換品 この品目は、代理店経由で入手できる場合があります

      オリジナル製品

      NS 93° NS 93°

      Top Notch™ねじ切りおよび溝入れ • KM40TS™切削ユニット
      (6 Products)
      製品を表示
      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
      3902290 KM40TSNSL2 KM40TSNSL2 40.0000 1.574 27.0000 1.063 NG2L 0.32 0.70
        定価:
        $273.11 /各
        価格::
        3902291 KM40TSNSL3 KM40TSNSL3 47.0000 1.850 27.0000 1.063 NG3L 0.33 0.72
          定価:
          $273.11 /各
          価格::
          3902292 KM40TSNSL4 KM40TSNSL4 47.0000 1.850 27.0000 1.063 NG4L 0.30 0.66
            定価:
            $273.11 /各
            価格::
            3902293 KM40TSNSR2 KM40TSNSR2 40.0000 1.574 27.0000 1.063 NG2R 0.32 0.70
              定価:
              $273.11 /各
              価格::
              3902294 KM40TSNSR3 KM40TSNSR3 47.0000 1.850 27.0000 1.063 NG3R 0.32 0.71
                定価:
                $273.11 /各
                価格::
                3902295 KM40TSNSR4 KM40TSNSR4 47.0000 1.850 27.0000 1.063 NG4R 0.30 0.66
                  定価:
                  $273.11 /各
                  価格::
                  定価:
                  割引: %
                  価格::
                  配置転換 この品目はありません
                  交換品 この品目は、代理店経由で入手できる場合があります

                  オリジナル製品

                  NE 93° NE 93°

                  Top Notch™ねじ切りおよび溝入れ • KM40TS™切削ユニット
                  (6 Products)
                  製品を表示
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                  3902132 KM40TSNEL2 KM40TSNEL2 40.0000 1.575 27.0000 1.063 54.0000 2.126 NG2R 0.30 0.66
                    定価:
                    $273.11 /各
                    価格::
                    3902283 KM40TSNEL3 KM40TSNEL3 40.0000 1.575 27.0000 1.063 54.0000 2.126 NG3R 0.30 0.67
                      定価:
                      $273.11 /各
                      価格::
                      3902284 KM40TSNEL4 KM40TSNEL4 40.0000 1.575 27.0000 1.063 54.0000 2.126 NG4R 0.30 0.65
                        定価:
                        $273.11 /各
                        価格::
                        3902285 KM40TSNER2 KM40TSNER2 40.0000 1.575 27.0000 1.063 54.0000 2.126 NG2L 0.30 0.66
                          定価:
                          $273.11 /各
                          価格::
                          3902286 KM40TSNER3 KM40TSNER3 40.0000 1.575 27.0000 1.063 54.0000 2.126 NG3L 0.30 0.67
                            定価:
                            $273.11 /各
                            価格::
                            3902287 KM40TSNER4 KM40TSNER4 40.0000 1.575 27.0000 1.063 54.0000 2.126 NG4L 0.30 0.66
                              定価:
                              $282.66 /各
                              価格::
                              定価:
                              割引: %
                              価格::
                              配置転換 この品目はありません
                              交換品 この品目は、代理店経由で入手できる場合があります
                              product-image
                              Please adjust the following properties from

                              ISO製品型番

                              ANSI製品型番

                              to find similar products.
                              複製を作成しようとしています . 続行しますか?
                              削除しようとしています 続行しますか?
                              の名前を何に変更しますか?
                              有効な名前を入力してください
                              重複の名前を入力してください
                              有効な名前を入力してください
                              マイソリューションページにを追加しようとしています. 続行しますか?
                              有効な名前を入力してください
                              次のコピーを送信

                              有効なメールアドレスを入力してください
                              有効な名前を入力してください

                              次のCAD図面が見つかりました

                              お探しのファイルを一括して選択してダウンロードできます

                              お探しの種類のファイルが見つかりませんか?
                              図面請求 »

                              ダッシュボード情報を表示するには、ログインする必要があります
                              Session expired due to inactivity, please login again
                              カートに追加しようとした製品（）はありません カスタマーサービスにお問い合わせください。
                              アイテムがカートに正常に追加されました
                              カートを表示
                              DOWNLOAD TYPE:



                              . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                              SAP Material Number ISO製品型番 材種    
                              Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                              You are about to leave the Solution building process.

                              Are you sure you want to leave?