提案製品

Product Family suggestions

がカートに正常に追加されました
カートを表示

通知

すべて既読にする
Mobile Menu

レイダウンねじ切り

フィルタを選択
Filters
フィルタ
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (14)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (14)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (14)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (14)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (14)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (14)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (14)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (14)
  • M Stainless Steel (14)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (14)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (14)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (14)
  • K Cast Iron (14)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (14)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (14)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (14)
  • N Non-Ferrous Materials (14)
    • N1
      Wrought Aluminum
      (14)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (14)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (14)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (14)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (14)
    • N6
      Carbon, Graphite Composites, CFRP
      (14)
    • N7
      MMC's
      (14)
  • S High-Temp Alloys (14)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (14)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (14)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (14)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (14)
  • H Hardened Materials (14)
    • H1
      Hardened Materials 44-48 HRC
      (14)
Applications
Applications
  • ID Thread Turning ID Thread Turning (14)
  • Threading Threading (14)
Type of Thread
Type of Thread
  • 55 (14)
  • 60 (14)
  • ACME (10)
  • API (2)
  • API BUTTRESS (2)
  • API RD (8)
  • BSPT (12)
  • BSW (14)
  • M (14)
  • NPT (12)
  • NPTF (12)
  • RD DIN 405 (10)
  • STUB ACME (10)
  • TR DIN 103 (10)
  • UN (12)
  • UNJ (12)
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (6)
  • 0.002 in (12)
  • 0.003 in (8)
  • 0.004 in (4)
  • 0.006 in (8)
  • 0.008 in (8)
  • 0.01 in (2)
  • 0.012 in (2)
  • 0.017 in (2)
  • 0.028 in (4)
  • 0.037 in (5)
  • 0.055 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (6)
  • 0.05 mm (12)
  • 0.076 mm (8)
  • 0.1 mm (4)
  • 0.151 mm (8)
  • 0.2 mm (8)
  • 0.225 mm (2)
  • 0.301 mm (2)
  • 0.426 mm (2)
  • 0.701 mm (4)
  • 0.925 mm (5)
  • 1.401 mm (1)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • HCK20 (4)
  • HCM15 (2)
  • K00331 (4)
  • K15 (13)
  • K68 (6)
  • KC5010 (6)
  • KC5025 (14)
  • KC710 (5)
  • KC720 (13)
  • KC722 (6)
  • KC730 (14)
  • KU25T (6)
  • P25 (9)
  • SP4066 (4)
  • TN6025 (14)
Hand Of Tool
Hand Of Tool
  • L (7)
  • R (7)
F Dimension
F Dimension
  • 7.0 mm (2)
  • 9.0 mm (2)
  • 11.0 mm (2)
  • 13.0 mm (2)
  • 17.0 mm (2)
  • 22.0 mm (4)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.276 in (2)
  • 0.354 in (2)
  • 0.433 in (2)
  • 0.512 in (2)
  • 0.669 in (2)
  • 0.866 in (4)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 13.0 mm (2)
  • 16.0 mm (2)
  • 20.0 mm (2)
  • 25.0 mm (2)
  • 32.0 mm (2)
  • 40.0 mm (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.512 in (2)
  • 0.63 in (2)
  • 0.787 in (2)
  • 0.984 in (2)
  • 1.26 in (2)
  • 1.575 in (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Bore Depth
Maximum Bore Depth
  • 1.385 in (2)
  • 1.655 in (1)
  • 1.661 in (1)
  • 2.209 in (2)
  • 2.757 in (2)
  • 2.955 in (2)
  • 3.781 in (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 35.15 mm (2)
  • 42.0 mm (1)
  • 42.2 mm (1)
  • 56.1 mm (2)
  • 70.025 mm (2)
  • 75.05 mm (2)
  • 96.025 mm (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
No filters matching ""
製品を表示
メートル
インチ

オリジナル製品

LSE 90° LSE 90°

LTねじ切り • KM40™切削ユニット
(14 Products)
製品を表示
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
3955463 KM40TSS10DLSEL11 KM40TSS10DLSEL11 10.0000 .3937 13.0000 .5118 7.0000 .2756 35.1600 1.384 60.0000 2.362 LT11NL 0.22 0.49
    定価:
    $433.76 /各
    価格::
    3955464 KM40TSS10DLSER11 KM40TSS10DLSER11 10.0000 .3937 13.0000 .5118 7.0000 .2756 35.1600 1.384 60.0000 2.362 LT11NR 0.22 0.49
      定価:
      $433.76 /各
      価格::
      3955465 KM40TSS12ELSEL11 KM40TSS12ELSEL11 12.0000 .4724 16.0000 .6299 9.0000 .3543 42.0000 1.653 70.0000 2.755 LT11NL 0.25 0.55
        定価:
        $433.76 /各
        価格::
        3955466 KM40TSS12ELSER11 KM40TSS12ELSER11 12.0000 .4724 16.0000 .6299 9.0000 .3543 42.2100 1.661 70.0000 2.755 LT11NR 0.25 0.56
          定価:
          $433.76 /各
          価格::
          3955467 KM40TSS16FLSEL16 KM40TSS16FLSEL16 16.0000 .6299 20.0000 .7874 11.0000 .4331 56.1100 2.209 80.0000 3.149 LT16NL 0.28 0.61
            この品目はありません
            この品目は、代理店経由で入手できる場合があります
            価格::
            3955468 KM40TSS16FLSER16 KM40TSS16FLSER16 16.0000 .6299 20.0000 .7874 11.0000 .4331 56.1100 2.209 80.0000 3.149 LT16NR 0.28 0.61
              定価:
              $433.76 /各
              価格::
              3955469 KM40TSS20GLSEL16 KM40TSS20GLSEL16 20.0000 .7874 25.0000 .9843 13.0000 .5118 70.0200 2.756 90.0000 3.543 LT16NL 0.34 0.75
                定価:
                $433.76 /各
                価格::
                3955470 KM40TSS20GLSER16 KM40TSS20GLSER16 20.0000 .7874 25.0000 .9843 13.0000 .5118 70.0200 2.756 90.0000 3.543 LT16NR 0.34 0.75
                  定価:
                  $433.76 /各
                  価格::
                  3955471 KM40TSS25HLSEL16 KM40TSS25HLSEL16 25.0000 .9843 32.0000 1.259 17.0000 .6693 75.0400 2.954 100.0000 3.937 LT16NL 0.50 1.11
                    定価:
                    $433.76 /各
                    価格::
                    3955472 KM40TSS25HLSER16 KM40TSS25HLSER16 25.0000 .9843 32.0000 1.259 17.0000 .6693 75.0400 2.954 100.0000 3.937 LT16NR 0.50 1.11
                      定価:
                      $433.76 /各
                      価格::
                      3955473 KM40TSS32JLSEL16 KM40TSS32JLSEL16 32.0000 1.259 40.0000 1.574 22.0000 .8661 96.0200 3.780 110.0000 4.330 LT16NL 0.72 1.58
                        定価:
                        $433.76 /各
                        価格::
                        3955475 KM40TSS32JLSEL22 KM40TSS32JLSEL22 32.0000 1.259 40.0000 1.574 22.0000 .8661 96.0200 3.780 110.0000 4.330 LT22NL 0.71 1.56
                          定価:
                          $433.76 /各
                          価格::
                          3955474 KM40TSS32JLSER16 KM40TSS32JLSER16 32.0000 1.259 40.0000 1.574 22.0000 .8661 96.0200 3.780 110.0000 4.330 LT16NR 0.72 1.58
                            定価:
                            $433.76 /各
                            価格::
                            3955476 KM40TSS32JLSER22 KM40TSS32JLSER22 32.0000 1.259 40.0000 1.574 22.0000 .8661 96.0200 3.780 110.0000 4.330 LT22NR 0.71 1.56
                              定価:
                              $433.76 /各
                              価格::
                              定価:
                              割引: %
                              価格::
                              配置転換 この品目はありません
                              交換品 この品目は、代理店経由で入手できる場合があります
                              product-image
                              Please adjust the following properties from

                              ISO製品型番

                              ANSI製品型番

                              to find similar products.
                              複製を作成しようとしています . 続行しますか?
                              削除しようとしています 続行しますか?
                              の名前を何に変更しますか?
                              有効な名前を入力してください
                              重複の名前を入力してください
                              有効な名前を入力してください
                              マイソリューションページにを追加しようとしています. 続行しますか?
                              有効な名前を入力してください
                              次のコピーを送信

                              有効なメールアドレスを入力してください
                              有効な名前を入力してください

                              次のCAD図面が見つかりました

                              お探しのファイルを一括して選択してダウンロードできます

                              お探しの種類のファイルが見つかりませんか?
                              図面請求 »

                              ダッシュボード情報を表示するには、ログインする必要があります
                              Session expired due to inactivity, please login again
                              カートに追加しようとした製品（）はありません カスタマーサービスにお問い合わせください。
                              アイテムがカートに正常に追加されました
                              カートを表示
                              DOWNLOAD TYPE:



                              . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                              SAP Material Number ISO製品型番 材種    
                              Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                              You are about to leave the Solution building process.

                              Are you sure you want to leave?