Laydown Threading

フィルタを選択
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (11)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (11)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (11)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (11)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (11)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (11)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (11)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (11)
  • M Stainless Steel (11)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (11)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (11)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (11)
  • K Cast Iron (11)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (11)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (11)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (11)
  • N Non-Ferrous Materials (9)
    • N1
      Wrought Aluminum (9)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (9)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (9)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (9)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (9)
    • N6
      Carbon, Graphite Composites, CFRP (9)
    • N7
      MMC's (9)
  • S High-Temp Alloys (11)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (11)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (11)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (11)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (11)
  • H Hardened Materials (9)
    • H1
      Hardened Materials 44-48 HRC (9)
Applications
Applications
  • ID Thread Turning ID Thread Turning (6)
  • OD Thread Turning OD Thread Turning (11)
  • Profiling Profiling (15)
  • TRN Boring TRN Boring (6)
  • Threading Threading (15)
Type of Thread
Type of Thread
  • 55 (9)
  • 60 (9)
  • ACME (9)
  • API (5)
  • API BUTTRESS (3)
  • API RD (6)
  • BSPT (6)
  • BSW (9)
  • M (9)
  • NPT (6)
  • NPTF (6)
  • RD DIN 405 (9)
  • STUB ACME (9)
  • TR DIN 103 (9)
  • UN (6)
  • UNJ (6)
Connection Style
Connection Style
  • KM (13)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 3.0 (11)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (1)
  • 0.002 in (6)
  • 0.003 in (6)
  • 0.004 in (3)
  • 0.005 in (2)
  • 0.006 in (4)
  • 0.007 in (2)
  • 0.008 in (6)
  • 0.01 in (2)
  • 0.011 in (4)
  • 0.012 in (4)
  • 0.014 in (2)
  • 0.015 in (2)
  • 0.017 in (3)
  • 0.02 in (2)
  • 0.021 in (1)
  • 0.027 in (2)
  • 0.028 in (1)
  • 0.03 in (2)
  • 0.037 in (2)
  • 0.038 in (2)
  • 0.039 in (1)
  • 0.055 in (1)
  • 0.06 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (1)
  • 0.05 mm (6)
  • 0.076 mm (6)
  • 0.1 mm (3)
  • 0.125 mm (2)
  • 0.151 mm (4)
  • 0.176 mm (2)
  • 0.2 mm (6)
  • 0.225 mm (2)
  • 0.25 mm (2)
  • 0.275 mm (4)
  • 0.301 mm (4)
  • 0.325 mm (2)
  • 0.375 mm (2)
  • 0.426 mm (3)
  • 0.5 mm (2)
  • 0.525 mm (1)
  • 0.65 mm (2)
  • 0.701 mm (1)
  • 0.75 mm (2)
  • 0.925 mm (2)
  • 0.976 mm (2)
  • 1.0 mm (1)
  • 1.401 mm (1)
  • 1.526 mm (1)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • HCK20 (1)
  • K00331 (3)
  • K15 (3)
  • K68 (3)
  • KC5010 (6)
  • KC5025 (11)
  • KC710 (5)
  • KC720 (8)
  • KC722 (3)
  • KC730 (9)
  • KC9105 (2)
  • KU25T (3)
  • P25 (3)
  • PN120 (2)
  • SP4066 (1)
  • TN6025 (9)
  • TTS (2)
Hand Of Tool
Hand Of Tool
  • L (6)
  • R (7)
Wiper Insert
Wiper Insert
  • N (11)
F Dimension
F Dimension
  • 35.0 mm (13)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 1.379 in (13)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 70.0 mm (6)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 2.757 in (6)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (5)
  • S (8)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (11)
  • DOUBLE POSITIVE (1)
  • POSITIVE-NEGATIVE (1)
Maximum Bore Depth
Maximum Bore Depth
  • 1.969 in (6)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 50.0 mm (6)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (4)
frontEnd
Clamp Style
Clamp Style
  • M (2)
  • S (13)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • H W (11)
backEnd
Connection Type
Connection Type
  • TAPER SHANK (13)
System Size
System Size
  • KM50TS (13)
No filters matching ""
マイソリューションページにを追加しようとしています. 続行しますか?
product-image
Please adjust the following properties from

ISO製品型番

ANSI製品型番

to find similar products.

The following files are available

Please select a file to download

Models

Product data

ダッシュボード情報を表示するには、ログインする必要があります
Session expired due to inactivity, please login again
カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
アイテムがカートに正常に追加されました
カートを表示

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO製品型番 材種    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?