通知

すべて既読にする
Mobile Menu

Laydown Threading

フィルタを選択
Filters
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (10)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (10)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (10)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (10)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (10)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (10)
  • M Stainless Steel (10)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (10)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (10)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (10)
  • K Cast Iron (10)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (10)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (10)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (10)
  • N Non-Ferrous Materials (10)
    • N1
      Wrought Aluminum
      (10)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (10)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (10)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (10)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (10)
    • N6
      Carbon, Graphite Composites, CFRP
      (10)
    • N7
      MMC's
      (10)
  • S High-Temp Alloys (10)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (10)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (10)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (10)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (10)
  • H Hardened Materials (10)
    • H1
      Hardened Materials 44-48 HRC
      (10)
Applications
Applications
  • ID Thread Turning ID Thread Turning (10)
  • Threading Threading (10)
Type of Thread
Type of Thread
  • 55 (10)
  • 60 (10)
  • ACME (10)
  • API (2)
  • API BUTTRESS (2)
  • API RD (8)
  • BSPT (8)
  • BSW (10)
  • M (10)
  • NPT (8)
  • NPTF (8)
  • RD DIN 405 (10)
  • STUB ACME (10)
  • TR DIN 103 (10)
  • UN (8)
  • UNJ (8)
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (4)
  • 0.002 in (8)
  • 0.003 in (8)
  • 0.004 in (4)
  • 0.006 in (8)
  • 0.008 in (8)
  • 0.012 in (2)
  • 0.017 in (2)
  • 0.028 in (4)
  • 0.037 in (5)
  • 0.055 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (4)
  • 0.05 mm (8)
  • 0.076 mm (8)
  • 0.1 mm (4)
  • 0.151 mm (8)
  • 0.2 mm (8)
  • 0.301 mm (2)
  • 0.426 mm (2)
  • 0.701 mm (4)
  • 0.925 mm (5)
  • 1.401 mm (1)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • HCK20 (4)
  • K00331 (4)
  • K15 (9)
  • K68 (4)
  • KC5010 (4)
  • KC5025 (10)
  • KC710 (5)
  • KC720 (9)
  • KC722 (4)
  • KC730 (10)
  • KU25T (4)
  • P25 (9)
  • SP4066 (4)
  • TN6025 (10)
Hand Of Tool
Hand Of Tool
  • L (5)
  • R (5)
F Dimension
F Dimension
  • 13.0 mm (2)
  • 17.0 mm (2)
  • 22.0 mm (2)
  • 27.0 mm (4)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.512 in (2)
  • 0.669 in (2)
  • 0.866 in (2)
  • 1.063 in (4)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 25.0 mm (2)
  • 32.0 mm (2)
  • 40.0 mm (2)
  • 50.0 mm (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.984 in (2)
  • 1.26 in (2)
  • 1.575 in (2)
  • 1.969 in (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Bore Depth
Maximum Bore Depth
  • 2.769 in (2)
  • 3.476 in (2)
  • 3.907 in (2)
  • 4.726 in (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 70.325 mm (2)
  • 88.301 mm (2)
  • 99.25 mm (2)
  • 120.025 mm (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
No filters matching ""
製品を表示
メートル
インチ

オリジナル製品

(10 Products)
  • シャンク — KM-TS ISO 26622シャンク — KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • クーラント — スルークーラント 最大100 bar(1500 psi)クーラント — スルークーラント 最大100 bar(1500 psi)
製品を表示
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
3964139 KM50TSS20HLSEL16 KM50TSS20HLSEL16 20.0000 .7874 25.0000 .9843 13.0000 .5118 70.3200 2.768 100.0000 3.937 LT16NL 0.58 1.27
    定価:
    $538.24 /各
    価格::
    数量
    3838705 KM50TSS20HLSER16 KM50TSS20HLSER16 20.0000 .7874 25.0000 .9843 13.0000 .5118 70.3200 2.768 100.0000 3.937 LT16NR 0.58 1.28
      定価:
      $538.24 /各
      価格::
      数量
      3838706 KM50TSS25JLSEL16 KM50TSS25JLSEL16 25.0000 .9843 32.0000 1.259 17.0000 .6693 88.2900 3.476 110.0000 4.330 LT16NL 0.68 1.49
        定価:
        $538.24 /各
        価格::
        数量
        3838724 KM50TSS25JLSER16 KM50TSS25JLSER16 25.0000 .9843 32.0000 1.259 17.0000 .6693 88.2900 3.476 110.0000 4.330 LT16NR 0.68 1.49
          定価:
          $538.24 /各
          価格::
          数量
          3838708 KM50TSS32KLSEL16 KM50TSS32KLSEL16 32.0000 1.260 40.0000 1.575 22.0000 .8660 99.2500 3.908 125.0000 4.921 LT16NL 0.99 2.18
            この品目はありません
            この品目は、代理店経由で入手できる場合があります
            価格::
            数量
            3838709 KM50TSS32KLSER16 KM50TSS32KLSER16 32.0000 1.259 40.0000 1.574 22.0000 .8661 99.2500 3.908 125.0000 4.921 LT16NR 0.99 2.18
              定価:
              $538.24 /各
              価格::
              数量
              3964140 KM50TSS40LLSEL16 KM50TSS40LLSEL16 40.0000 1.574 50.0000 1.968 27.0000 1.063 120.0200 4.725 140.0000 5.511 LT16NL 1.46 3.21
                定価:
                $538.24 /各
                価格::
                数量
                3964141 KM50TSS40LLSEL22 KM50TSS40LLSEL22 40.0000 1.574 50.0000 1.968 27.0000 1.063 120.0200 4.725 140.0000 5.511 LT22NL 1.45 3.21
                  定価:
                  $538.24 /各
                  価格::
                  数量
                  3838710 KM50TSS40LLSER16 KM50TSS40LLSER16 40.0000 1.574 50.0000 1.968 27.0000 1.063 120.0200 4.725 140.0000 5.511 LT16NR 1.46 3.21
                    定価:
                    $538.24 /各
                    価格::
                    数量
                    3838711 KM50TSS40LLSER22 KM50TSS40LLSER22 40.0000 1.574 50.0000 1.968 27.0000 1.063 120.0200 4.725 140.0000 5.511 LT22NR 1.45 3.21
                      定価:
                      $538.24 /各
                      価格::
                      数量
                      定価:
                      割引: %
                      価格::
                      配置転換 この品目はありません
                      交換品 この品目は、代理店経由で入手できる場合があります
                      数量

                      販売包装単位

                      product-image
                      Please adjust the following properties from

                      ISO製品型番

                      ANSI製品型番

                      to find similar products.
                      複製を作成しようとしています . 続行しますか?
                      削除しようとしています 続行しますか?
                      の名前を何に変更しますか?
                      有効な名前を入力してください
                      重複の名前を入力してください
                      有効な名前を入力してください
                      マイソリューションページにを追加しようとしています. 続行しますか?
                      有効な名前を入力してください
                      次のコピーを送信

                      有効なメールアドレスを入力してください
                      有効な名前を入力してください

                      次のCAD図面が見つかりました

                      お探しのファイルを一括して選択してダウンロードできます

                      ダッシュボード情報を表示するには、ログインする必要があります
                      Session expired due to inactivity, please login again
                      カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
                      アイテムがカートに正常に追加されました
                      カートを表示
                      DOWNLOAD TYPE:



                      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                      SAP Material Number ISO製品型番 材種    
                      Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                      You are about to leave the Solution building process.

                      Are you sure you want to leave?