フィルタ
フィルタ
フィルタ表示
メートルインチ
Workpiece Material
Workpiece Material
- P Steel (14)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(14)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(14)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(14)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(14)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(14)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(14)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(14)
- M Stainless Steel (14)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(14)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(14)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(14)
- K Cast Iron (14)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(14)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(14)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(14)
- N Non-Ferrous Materials (14)
- N1Wrought Aluminum (14)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(14)
- N3High-Silicon Aluminum Alloys Si >12.2%(14)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (14)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (14)
- N6Carbon, Graphite Composites, CFRP (14)
- N7MMC's (14)
- S High-Temp Alloys (14)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(14)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(14)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(14)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(14)
- H Hardened Materials (14)
- H1Hardened Materials 44-48 HRC(14)
- H2Hardened Materials 48-55 HRC(14)
- H3Hardened Materials 56-60 HRC(14)
- H4Hardened Materials >60 HRC(14)
- C CFRP Materials (14)
- C1CFRP, CFRP / CFRP (14)
- C2CFRP / Aluminium CFRP / Non-Ferrous (14)
Applications
Applications
- Facing (14)
- ID Facing (14)
- Multiple Direction Cutting (14)
- Plunge Turning (8)
- TRN Boring (14)
- Turning (14)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (14)
- Lightly Interrupted Cut (14)
- Smooth Cut (14)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 93.0 (2)
- 95.0 (6)
- 107.5 (6)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (14)
- 2.0 (14)
- 4.0 (6)
to
Over All Length [L]
Over All Length [L]
- 2.757 in(3)
- 3.15 in(2)
- 3.543 in(5)
- 4.331 in(2)
- 5.513 in(1)
- 5.906 in(1)
to
Over All Length [L]
Over All Length [L]
- 70.0 mm(3)
- 80.0 mm(2)
- 90.0 mm(5)
- 110.0 mm(2)
- 140.0 mm(1)
- 150.0 mm(1)
to
Corner Radius
Corner Radius
- 0.0 in(6)
- 0.001 in(8)
- 0.002 in(14)
- 0.004 in(14)
- 0.008 in(14)
- 0.016 in(14)
- 0.031 in(14)
- 0.047 in(13)
- 0.063 in(6)
to
Corner Radius
Corner Radius
- 0.0 mm(6)
- 0.025 mm(8)
- 0.05 mm(14)
- 0.1 mm(14)
- 0.2 mm(14)
- 0.4 mm(14)
- 0.8 mm(14)
- 1.201 mm(13)
- 1.6 mm(6)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- GH1 (1)
- HCK10 (8)
- HK1500 (13)
- HK35 (2)
- HT2 (14)
- HTX (14)
- HWK15 (8)
- K1010P (1)
- K10M (8)
- K10U (14)
- K15U (14)
- K20K (1)
- K25M (6)
- K25P (7)
- K313 (14)
- K420 (1)
- K68 (14)
- KB1345 (7)
- KB1610 (14)
- KB1625 (7)
- KB1630 (6)
- KB5610 (14)
- KB5625 (14)
- KB5630 (14)
- KB9610 (14)
- KBH10 (14)
- KBH20 (14)
- KC5010 (14)
- KC5020P (8)
- KC5025 (14)
- KC5410 (14)
- KC720 (14)
- KC730 (14)
- KC732 (14)
- KC8050 (14)
- KC810 (14)
- KC850 (14)
- KC9010 (8)
- KC9025 (14)
- KC910 (14)
- KC9105 (14)
- KC9110 (14)
- KC9120 (7)
- KC9125 (14)
- KC9225 (14)
- KC9240 (14)
- KC9240NEW (14)
- KC9315 (14)
- KC9320 (14)
- KC9325 (7)
- KC935 (14)
- KC950 (14)
- KC990 (8)
- KCD25 (13)
- KCK05 (14)
- KCK05B (13)
- KCK15 (13)
- KCK15B (14)
- KCK20 (14)
- KCK20B (14)
- KCM15 (14)
- KCM15B (14)
- KCM25 (14)
- KCM25B (14)
- KCM25S (8)
- KCM35 (14)
- KCM35B (7)
- KCP05 (14)
- KCP05B (12)
- KCP10 (14)
- KCP10B (14)
- KCP15 (6)
- KCP20S (8)
- KCP25 (14)
- KCP25B (14)
- KCP25C (14)
- KCP30 (14)
- KCP30B (6)
- KCP40B (6)
- KCS10 (14)
- KCS10B (14)
- KCS25S (8)
- KCU10 (14)
- KCU10B (14)
- KCU25 (14)
- KCU25B (14)
- KD050 (13)
- KD081 (13)
- KD100 (6)
- KD1400 (14)
- KD1405 (6)
- KD1425 (14)
- KN10S (8)
- KT125 (1)
- KT175 (14)
- KT315 (14)
- KT325 (14)
- KTP10 (14)
- KTP25S (14)
- KU10 (14)
- KU10T (14)
- KU30T (14)
- PB100 (1)
- PB250 (1)
- PD100 (8)
- PD50 (2)
- SPN3W1 (6)
- THM (14)
- THM-X (7)
- TN10P (14)
- TN10U (14)
- TN15M (14)
- TN15U (14)
- TN2000 (13)
- TN20K (14)
- TN20P (14)
- TN30M (14)
- TN4000 (12)
- TN5015 (7)
- TN5020 (14)
- TN5105 (7)
- TN5120 (14)
- TN6010 (7)
- TN6025 (7)
- TN7005 (13)
- TN7010 (14)
- TN7015 (14)
- TN7025 (14)
- TN7035 (14)
- TN7105 (14)
- TN7110 (14)
- TN7115 (14)
- TN7125 (14)
- TN7135 (14)
- TN8025 (8)
- TTI15 (13)
- TTM (6)
- TTR (7)
- TTS (6)
- TTX (14)
- W00342 (2)
- WBH10C (13)
- WBH10P (14)
- WBH10U (14)
- WBH20P (8)
- WBH25P (14)
- WBH25U (8)
- WBH30P (14)
- WBK45U (7)
- WDN00U (6)
- WDN25U (14)
- WK05CT (8)
- WK15CT (13)
- WK20CT (14)
- WM15CT (14)
- WM25CT (14)
- WP15CT (14)
- WP20TT (1)
- WP25CT (14)
- WP35CT (14)
- WS10PT (7)
- WS25PT (7)
- WU05PT (8)
- WU10HT (14)
- WU10PT (13)
- WU25PT (14)
Hand Of Tool
Hand Of Tool
- L (6)
- R (8)
Wiper Insert
Wiper Insert
- N (14)
- Y (7)
F Dimension
F Dimension
- 11.0 mm(3)
- 13.0 mm(2)
- 17.0 mm(3)
- 18.0 mm(2)
- 22.0 mm(2)
- 27.0 mm(1)
- 35.0 mm(1)
to
F Dimension
F Dimension
- 0.433 in(3)
- 0.512 in(2)
- 0.669 in(3)
- 0.709 in(2)
- 0.866 in(2)
- 1.063 in(1)
- 1.379 in(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 20.0 mm(3)
- 25.0 mm(2)
- 32.0 mm(3)
- 33.0 mm(2)
- 40.0 mm(2)
- 50.0 mm(1)
- 63.0 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.787 in(3)
- 0.984 in(2)
- 1.26 in(3)
- 1.299 in(2)
- 1.575 in(2)
- 1.969 in(1)
- 2.48 in(1)
to
Cutting Direction
Cutting Direction
- B (6)
- E (8)
Maximum Bore Depth
Maximum Bore Depth
- 1.811 in(3)
- 2.205 in(2)
- 2.638 in(5)
- 3.465 in(2)
- 4.686 in(1)
- 5.906 in(1)
to
Maximum Bore Depth
Maximum Bore Depth
- 46.0 mm(3)
- 56.0 mm(2)
- 67.0 mm(5)
- 88.0 mm(2)
- 119.0 mm(1)
- 150.0 mm(1)
to
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (6)
- D-DIAMOND/RHOMBIC 55 (2)
- V-DIAMOND/RHOMBIC 35 (6)
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (14)
- B L (14)
- C N (6)
- D P (14)
- H T (14)
- H W (14)
backEnd
System Size
System Size
- PSC50 (6)
No filters matching ""