Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Máte otázku týkající se produktu?

Zobrazit úplný seznam globálních servisních odborníků podle specializace.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík

VSM11H

Vybrat filtry
Filters
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (146)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (130)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (146)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (146)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (146)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (146)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (146)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (146)
  • M Stainless Steel (146)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (146)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (146)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (146)
  • K Cast Iron (131)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (131)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (123)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (123)
  • N Non-Ferrous Materials (122)
    • N1
      Wrought Aluminum (122)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (122)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (114)
  • S High-Temp Alloys (146)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (135)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (135)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (135)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (146)
  • H Hardened Materials (102)
    • H1
      Hardened Materials 44-48 HRC (102)
Select All Star
  • CN (61)
  • DE (106)
  • GB (32)
  • IN (19)
  • SG (53)
  • US (54)
Applications
Applications
  • Face Milling Face Milling (74)
  • Pocket Pocket (73)
  • Pocket Helical Pocket Helical (73)
  • Pocket Milling Pocket Milling (73)
  • Profile Milling Profile Milling (11)
  • Ramping Ramping (73)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (1)
  • Shoulder Milling Shoulder Milling (74)
  • Shoulder Roughing Shoulder Roughing (73)
  • Shoulder Square End Shoulder Square End (73)
  • Slot Milling Slot Milling (50)
  • Slot Square End Slot Square End (51)
Cutting Diameter
Cutting Diameter
  • 0.473 in (2)
  • 0.5 in (1)
  • 0.625 in (2)
  • 0.63 in (6)
  • 0.709 in (3)
  • 0.75 in (7)
  • 0.787 in (8)
  • 0.866 in (3)
  • 0.984 in (8)
  • 1.0 in (9)
  • 1.181 in (1)
  • 1.25 in (5)
  • 1.26 in (9)
  • 1.5 in (3)
  • 1.575 in (3)
  • 1.969 in (2)
  • 2.0 in (3)
  • 2.48 in (2)
  • 2.5 in (2)
  • 3.0 in (1)
  • 3.15 in (1)
  • 3.938 in (1)
  • 4.0 in (1)
  • 4.921 in (1)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 12.0 mm (2)
  • 12.701 mm (1)
  • 15.875 mm (2)
  • 16.0 mm (6)
  • 18.0 mm (3)
  • 19.05 mm (7)
  • 20.0 mm (8)
  • 22.0 mm (3)
  • 25.0 mm (8)
  • 25.401 mm (9)
  • 30.0 mm (1)
  • 31.75 mm (5)
  • 32.0 mm (9)
  • 38.1 mm (3)
  • 40.0 mm (3)
  • 50.0 mm (2)
  • 50.801 mm (3)
  • 63.0 mm (2)
  • 63.5 mm (2)
  • 76.2 mm (1)
  • 80.0 mm (1)
  • 100.0 mm (1)
  • 101.601 mm (1)
  • 125.0 mm (1)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Length
Cutting Length
  • 11.326 mm (13)
  • 11.375 mm (3)
  • 11.4 mm (3)
  • 11.451 mm (15)
  • 11.525 mm (28)
  • 11.55 mm (15)
  • 11.576 mm (3)
  • 11.701 mm (3)
  • 51.625 mm (1)
Cutting Length Min komu Cutting Length Max
Cutting Length
Cutting Length
  • 0.446 in (13)
  • 0.448 in (3)
  • 0.449 in (3)
  • 0.451 in (15)
  • 0.454 in (28)
  • 0.455 in (15)
  • 0.456 in (3)
  • 0.461 in (3)
  • 2.032 in (1)
Cutting Length Min komu Cutting Length Max
Reach
Reach
  • 0.8 in (1)
  • 0.828 in (4)
  • 0.845 in (1)
  • 0.984 in (4)
  • 1.0 in (1)
  • 1.1 in (3)
  • 1.102 in (1)
  • 1.17 in (2)
  • 1.181 in (5)
  • 1.22 in (13)
  • 1.25 in (3)
  • 1.26 in (1)
  • 1.282 in (1)
  • 1.299 in (2)
  • 1.5 in (2)
  • 1.536 in (3)
  • 1.575 in (15)
  • 1.6 in (1)
  • 1.61 in (2)
  • 1.614 in (5)
  • 1.72 in (2)
  • 1.75 in (1)
  • 1.969 in (4)
  • 2.0 in (1)
  • 2.1 in (2)
  • 2.48 in (1)
  • 2.511 in (1)
  • 2.559 in (1)
  • 3.0 in (1)
Reach Min komu Reach Max
Reach
Reach
  • 20.326 mm (1)
  • 21.0 mm (4)
  • 21.451 mm (1)
  • 25.0 mm (4)
  • 25.401 mm (1)
  • 27.951 mm (3)
  • 28.0 mm (1)
  • 29.725 mm (2)
  • 30.0 mm (5)
  • 31.0 mm (13)
  • 31.75 mm (3)
  • 32.0 mm (1)
  • 32.551 mm (1)
  • 33.0 mm (2)
  • 38.1 mm (2)
  • 39.0 mm (3)
  • 40.0 mm (15)
  • 40.651 mm (1)
  • 40.901 mm (2)
  • 41.0 mm (5)
  • 43.7 mm (2)
  • 44.45 mm (1)
  • 50.0 mm (4)
  • 50.801 mm (1)
  • 53.35 mm (2)
  • 63.0 mm (1)
  • 63.75 mm (1)
  • 65.0 mm (1)
  • 76.2 mm (1)
Reach Min komu Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (84)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (18)
  • Screw-On Connection (9)
  • Straight-Cylindrical (33)
  • Weldon (24)
Number of Flutes
Number of Flutes
  • 1 (3)
  • 11 (1)
  • 2 (17)
  • 3 (25)
  • 4 (16)
  • 5 (7)
  • 6 (7)
  • 8 (4)
  • 9 (4)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (86)
  • 2.0 (175)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.575 in (12)
  • 1.681 in (1)
  • 1.75 in (1)
  • 1.889 in (1)
  • 1.891 in (1)
  • 1.969 in (2)
  • 2.0 in (1)
  • 2.116 in (1)
  • 2.126 in (1)
  • 2.465 in (2)
  • 2.48 in (1)
  • 2.539 in (2)
  • 2.638 in (1)
  • 2.75 in (1)
  • 2.757 in (3)
  • 3.0 in (1)
  • 3.11 in (1)
  • 3.189 in (3)
  • 3.2 in (2)
  • 3.228 in (1)
  • 3.25 in (1)
  • 3.465 in (3)
  • 3.5 in (2)
  • 3.781 in (2)
  • 3.938 in (6)
  • 4.0 in (4)
  • 4.331 in (3)
  • 4.5 in (2)
  • 4.724 in (2)
  • 4.8 in (3)
  • 5.118 in (3)
  • 5.2 in (1)
  • 6.694 in (5)
  • 6.7 in (2)
  • 8.0 in (2)
  • 8.268 in (2)
  • 9.8 in (1)
  • 9.843 in (1)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (12)
  • 42.7 mm (1)
  • 44.45 mm (1)
  • 47.95 mm (1)
  • 48.0 mm (1)
  • 50.0 mm (2)
  • 50.801 mm (1)
  • 53.75 mm (1)
  • 54.0 mm (1)
  • 62.6 mm (2)
  • 63.0 mm (1)
  • 64.5 mm (2)
  • 67.0 mm (1)
  • 69.851 mm (1)
  • 70.0 mm (3)
  • 76.2 mm (1)
  • 79.0 mm (1)
  • 81.0 mm (3)
  • 81.275 mm (2)
  • 82.0 mm (1)
  • 82.551 mm (1)
  • 88.0 mm (3)
  • 88.9 mm (2)
  • 96.0 mm (2)
  • 100.0 mm (6)
  • 101.601 mm (4)
  • 110.0 mm (3)
  • 114.301 mm (2)
  • 120.0 mm (2)
  • 121.926 mm (3)
  • 130.0 mm (3)
  • 132.076 mm (1)
  • 170.0 mm (5)
  • 170.175 mm (2)
  • 203.201 mm (2)
  • 210.0 mm (2)
  • 248.925 mm (1)
  • 250.0 mm (1)
Over All Length [L] Min komu Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.008 in (86)
  • 0.016 in (99)
  • 0.031 in (110)
  • 0.047 in (98)
  • 0.063 in (99)
  • 0.079 in (90)
  • 0.095 in (90)
  • 0.122 in (90)
  • 0.126 in (87)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (86)
  • 0.4 mm (99)
  • 0.775 mm (92)
  • 0.8 mm (102)
  • 1.201 mm (98)
  • 1.6 mm (99)
  • 2.0 mm (90)
  • 2.401 mm (90)
  • 3.1 mm (90)
  • 3.2 mm (87)
Corner Radius Min komu Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WDN10U (86)
  • WK15CM (93)
  • WK15PM (88)
  • WN10HM (92)
  • WN25PM (92)
  • WP25PM (95)
  • WP35CM (95)
  • WP40PM (97)
  • WS30PM (87)
  • WS40PM (100)
  • WU20PM (88)
  • WU35PM (88)
Hand Of Tool
Hand Of Tool
  • R (84)
Wiper Insert
Wiper Insert
  • N (93)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.7 (1)
  • 0.9 (2)
  • 1.1 (1)
  • 1.2 (1)
  • 1.5 (4)
  • 1.8 (1)
  • 1.9 (5)
  • 2.6 (3)
  • 2.8 (2)
  • 3.2 (1)
  • 3.6 (13)
  • 3.7 (2)
  • 4.2 (1)
  • 5.1 (9)
  • 5.3 (8)
  • 6.6 (1)
  • 7.8 (8)
  • 8.6 (7)
  • 9.7 (1)
  • 10.0 (5)
  • 12.5 (2)
Maximum Ramp Angle Min komu Maximum Ramp Angle Max
frontEnd
Neck Diameter
Neck Diameter
  • 0.371 in (2)
  • 0.392 in (1)
  • 0.467 in (1)
  • 0.539 in (2)
  • 0.543 in (5)
  • 0.577 in (1)
  • 0.636 in (1)
  • 0.669 in (1)
  • 0.67 in (5)
  • 0.709 in (7)
  • 0.722 in (1)
  • 0.74 in (1)
  • 0.785 in (1)
  • 0.896 in (7)
  • 0.911 in (6)
  • 1.084 in (1)
  • 1.151 in (4)
  • 1.159 in (8)
Neck Diameter Min komu Neck Diameter Max
Neck Diameter
Neck Diameter
  • 9.425 mm (2)
  • 9.951 mm (1)
  • 11.851 mm (1)
  • 13.701 mm (2)
  • 13.8 mm (5)
  • 14.65 mm (1)
  • 16.151 mm (1)
  • 17.0 mm (1)
  • 17.026 mm (5)
  • 18.0 mm (7)
  • 18.35 mm (1)
  • 18.8 mm (1)
  • 19.951 mm (1)
  • 22.75 mm (7)
  • 23.151 mm (6)
  • 27.526 mm (1)
  • 29.201 mm (4)
  • 29.451 mm (8)
Neck Diameter Min komu Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • X-PARALLELOGRAM 75 (93)
Cutting Edge Length
Cutting Edge Length
  • 11.451 mm (3)
  • 11.476 mm (6)
  • 11.675 mm (3)
  • 11.726 mm (40)
  • 11.75 mm (39)
Cutting Edge Length Min komu Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.451 in (3)
  • 0.452 in (6)
  • 0.46 in (3)
  • 0.462 in (40)
  • 0.463 in (39)
Cutting Edge Length Min komu Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • ALP (16)
  • MH (13)
  • ML (20)
  • MM (38)
  • MU (4)
Cutting Tool Material
Cutting Tool Material
  • D P (2)
  • H W (91)
Tolerance Class
Tolerance Class
  • C (38)
  • E (2)
  • P (53)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (57)
  • SCREW-ON (9)
  • SHELL MILL (18)
Back-End Diameter
Back-End Diameter
  • 12.0 mm (2)
  • 13.0 mm (1)
  • 15.875 mm (3)
  • 16.0 mm (11)
  • 18.0 mm (2)
  • 19.0 mm (7)
  • 19.05 mm (7)
  • 20.0 mm (10)
  • 21.0 mm (2)
  • 22.0 mm (4)
  • 25.0 mm (10)
  • 25.401 mm (8)
  • 27.0 mm (1)
  • 29.0 mm (4)
  • 31.701 mm (4)
  • 32.0 mm (6)
  • 38.1 mm (1)
  • 40.0 mm (1)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.473 in (2)
  • 0.512 in (1)
  • 0.625 in (3)
  • 0.63 in (11)
  • 0.709 in (2)
  • 0.748 in (7)
  • 0.75 in (7)
  • 0.787 in (10)
  • 0.828 in (2)
  • 0.866 in (4)
  • 0.984 in (10)
  • 1.0 in (8)
  • 1.063 in (1)
  • 1.143 in (4)
  • 1.248 in (4)
  • 1.26 in (6)
  • 1.5 in (1)
  • 1.575 in (1)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""

Těla nástrojů

(84) Těla nástrojů

Břitové destičky

(93) Břitové destičky

Máte otázky?

Náši odborníci vám pomohou.

Kontaktujte nás
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

I have read and accepted the Terms & Conditions of use

 

Can’t find the file type you’re looking for?

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku
Zobrazit košík
DOWNLOAD TYPE:



. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.