Modular Stability

A stable modular drilling platform accompanied by three insert geometry types to machine a variety of applications. 

TDMX was engineered with a secure pocket seat design to ensure maximum stability in challenging drilling applications like cross-hole, inclined extry/exit, and interrupted cuts.

Product Features:

  • X pocket seat design to increase stability in high-demanding applications
  • Insert diameter range from .629"-1.574" (16mm-40mm)
  • Margin lands on the entire body to ensure straightness and hole quality
  • Improved chip evacuation
  • Coolant channel exit behind the cutting edge
  • Flanged shank for higher rigidity
  • Polished flutes for improved chip evacuation
  • Tapered insert seat z-axis
  • Engineered grades for material-specific applications
  • Available to regrind 3x
  • Front clamping design easily removed from the body without disassebling the body from the holder to change the insert

 

 

Vybrat filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (340)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(340)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(340)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(340)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(340)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(340)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(340)
    • M Stainless Steel (440)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(440)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(440)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(440)
    • K Cast Iron (440)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(440)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(440)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(440)
    • N Non-Ferrous Materials (284)
      • N1
        Wrought Aluminum (284)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(284)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(284)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (284)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (284)
      • N6
        Carbon, Graphite Composites, CFRP (284)
      • N7
        MMC's (284)
    • S High-Temp Alloys (340)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(340)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(340)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(340)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(340)
    Select All Star
    • CN (44)
    • DE (52)
    • GB (5)
    • IN (4)
    • SG (49)
    • US (31)
    Applications
    Applications
    • Convex DrillingConvex Drilling (184)
    • DrillingDrilling (184)
    • Inclined Entry DrillingInclined Entry Drilling (184)
    • Inclined Exit DrillingInclined Exit Drilling (184)
    • Stacked Plates DrillingStacked Plates Drilling (184)
    Cutting Diameter
    Cutting Diameter
    • 0.63 in(13)
    • 0.638 in(12)
    • 0.641 in(13)
    • 0.65 in(13)
    • 0.656 in(13)
    • 0.669 in(13)
    • 0.672 in(13)
    • 0.689 in(12)
    • 0.69 in(13)
    • 0.694 in(12)
    • 0.702 in(12)
    • 0.704 in(12)
    • 0.709 in(13)
    • 0.719 in(12)
    • 0.728 in(13)
    • 0.734 in(12)
    • 0.74 in(12)
    • 0.748 in(13)
    • 0.75 in(13)
    • 0.756 in(12)
    • 0.759 in(12)
    • 0.766 in(12)
    • 0.768 in(13)
    • 0.776 in(12)
    • 0.781 in(13)
    • 0.787 in(13)
    • 0.791 in(12)
    • 0.795 in(12)
    • 0.797 in(12)
    • 0.799 in(12)
    • 0.803 in(12)
    • 0.807 in(13)
    • 0.811 in(12)
    • 0.814 in(12)
    • 0.816 in(12)
    • 0.82 in(12)
    • 0.824 in(12)
    • 0.828 in(13)
    • 0.844 in(12)
    • 0.846 in(13)
    • 0.866 in(13)
    • 0.875 in(12)
    • 0.884 in(12)
    • 0.886 in(13)
    • 0.906 in(13)
    • 0.925 in(13)
    • 0.937 in(12)
    • 0.946 in(13)
    • 0.965 in(13)
    • 0.969 in(12)
    • 0.984 in(13)
    • 1.0 in(13)
    • 1.004 in(13)
    • 1.012 in(14)
    • 1.014 in(12)
    • 1.016 in(12)
    • 1.024 in(13)
    • 1.032 in(12)
    • 1.039 in(13)
    • 1.043 in(13)
    • 1.047 in(12)
    • 1.063 in(13)
    • 1.083 in(13)
    • 1.094 in(12)
    • 1.102 in(13)
    • 1.109 in(12)
    • 1.122 in(13)
    • 1.125 in(12)
    • 1.143 in(13)
    • 1.156 in(12)
    • 1.161 in(13)
    • 1.172 in(12)
    • 1.181 in(13)
    • 1.188 in(12)
    • 1.201 in(13)
    • 1.219 in(12)
    • 1.22 in(13)
    • 1.24 in(13)
    • 1.25 in(13)
    • 1.26 in(9)
    • 1.28 in(9)
    • 1.299 in(9)
    • 1.313 in(8)
    • 1.339 in(9)
    • 1.344 in(8)
    • 1.375 in(8)
    • 1.379 in(9)
    • 1.399 in(9)
    • 1.417 in(9)
    • 1.437 in(9)
    • 1.457 in(9)
    • 1.476 in(9)
    • 1.496 in(9)
    • 1.5 in(9)
    • 1.508 in(7)
    • 1.516 in(9)
    • 1.536 in(9)
    • 1.547 in(7)
    • 1.555 in(9)
    • 1.575 in(9)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 16.0 mm(13)
    • 16.2 mm(12)
    • 16.276 mm(13)
    • 16.5 mm(13)
    • 16.675 mm(13)
    • 17.0 mm(13)
    • 17.075 mm(13)
    • 17.475 mm(12)
    • 17.5 mm(13)
    • 17.6 mm(12)
    • 17.8 mm(12)
    • 17.85 mm(12)
    • 18.0 mm(13)
    • 18.25 mm(12)
    • 18.5 mm(13)
    • 18.651 mm(12)
    • 18.8 mm(12)
    • 19.0 mm(13)
    • 19.05 mm(13)
    • 19.201 mm(12)
    • 19.276 mm(12)
    • 19.451 mm(12)
    • 19.5 mm(13)
    • 19.701 mm(12)
    • 19.85 mm(13)
    • 20.0 mm(13)
    • 20.1 mm(12)
    • 20.201 mm(12)
    • 20.25 mm(12)
    • 20.3 mm(12)
    • 20.401 mm(12)
    • 20.5 mm(13)
    • 20.6 mm(12)
    • 20.651 mm(12)
    • 20.701 mm(12)
    • 20.8 mm(12)
    • 20.901 mm(12)
    • 21.0 mm(13)
    • 21.425 mm(12)
    • 21.5 mm(13)
    • 22.0 mm(13)
    • 22.225 mm(12)
    • 22.451 mm(12)
    • 22.5 mm(13)
    • 23.0 mm(13)
    • 23.5 mm(13)
    • 23.8 mm(12)
    • 24.0 mm(13)
    • 24.5 mm(13)
    • 24.6 mm(12)
    • 25.0 mm(13)
    • 25.401 mm(13)
    • 25.5 mm(13)
    • 25.675 mm(12)
    • 25.701 mm(12)
    • 25.75 mm(12)
    • 25.8 mm(12)
    • 26.0 mm(13)
    • 26.201 mm(12)
    • 26.401 mm(13)
    • 26.5 mm(13)
    • 26.6 mm(12)
    • 27.0 mm(13)
    • 27.5 mm(13)
    • 27.776 mm(12)
    • 28.0 mm(13)
    • 28.175 mm(12)
    • 28.5 mm(13)
    • 28.576 mm(12)
    • 29.0 mm(13)
    • 29.375 mm(12)
    • 29.5 mm(13)
    • 29.776 mm(12)
    • 30.0 mm(13)
    • 30.175 mm(12)
    • 30.5 mm(13)
    • 30.951 mm(12)
    • 31.0 mm(13)
    • 31.5 mm(13)
    • 31.75 mm(13)
    • 32.0 mm(9)
    • 32.5 mm(9)
    • 33.0 mm(9)
    • 33.35 mm(8)
    • 34.0 mm(9)
    • 34.125 mm(8)
    • 34.926 mm(8)
    • 35.0 mm(9)
    • 35.5 mm(9)
    • 36.0 mm(9)
    • 36.5 mm(9)
    • 37.0 mm(9)
    • 37.5 mm(9)
    • 38.0 mm(9)
    • 38.1 mm(9)
    • 38.301 mm(7)
    • 38.5 mm(9)
    • 39.0 mm(9)
    • 39.301 mm(7)
    • 39.5 mm(9)
    • 40.0 mm(9)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 26.0 mm(2)
    • 27.0 mm(2)
    • 29.0 mm(2)
    • 30.0 mm(2)
    • 32.0 mm(2)
    • 33.0 mm(2)
    • 35.0 mm(2)
    • 36.0 mm(2)
    • 38.0 mm(2)
    • 39.0 mm(2)
    • 41.0 mm(2)
    • 42.0 mm(2)
    • 44.0 mm(2)
    • 45.0 mm(2)
    • 47.0 mm(2)
    • 48.0 mm(2)
    • 51.0 mm(2)
    • 54.0 mm(2)
    • 57.0 mm(2)
    • 60.0 mm(2)
    • 63.0 mm(2)
    • 66.0 mm(2)
    • 69.0 mm(2)
    • 72.0 mm(2)
    • 75.0 mm(2)
    • 78.0 mm(2)
    • 81.0 mm(2)
    • 84.0 mm(2)
    • 85.0 mm(2)
    • 87.0 mm(2)
    • 90.0 mm(4)
    • 93.0 mm(2)
    • 95.0 mm(2)
    • 96.0 mm(2)
    • 100.0 mm(2)
    • 102.0 mm(2)
    • 105.0 mm(2)
    • 108.0 mm(2)
    • 110.0 mm(2)
    • 114.0 mm(2)
    • 115.0 mm(2)
    • 120.0 mm(4)
    • 125.0 mm(2)
    • 130.0 mm(2)
    • 135.0 mm(2)
    • 136.0 mm(2)
    • 140.0 mm(2)
    • 144.0 mm(2)
    • 145.0 mm(2)
    • 150.0 mm(2)
    • 152.0 mm(2)
    • 155.0 mm(2)
    • 160.0 mm(4)
    • 168.0 mm(2)
    • 170.0 mm(2)
    • 176.0 mm(2)
    • 180.0 mm(2)
    • 184.0 mm(2)
    • 190.0 mm(2)
    • 192.0 mm(2)
    • 200.0 mm(4)
    • 204.0 mm(2)
    • 208.0 mm(2)
    • 216.0 mm(4)
    • 224.0 mm(2)
    • 228.0 mm(2)
    • 232.0 mm(2)
    • 240.0 mm(4)
    • 248.0 mm(2)
    • 252.0 mm(2)
    • 256.0 mm(2)
    • 264.0 mm(2)
    • 272.0 mm(2)
    • 276.0 mm(2)
    • 288.0 mm(4)
    • 300.0 mm(2)
    • 304.0 mm(2)
    • 312.0 mm(2)
    • 320.0 mm(2)
    • 324.0 mm(2)
    • 336.0 mm(2)
    • 348.0 mm(2)
    • 360.0 mm(2)
    • 372.0 mm(2)
    • 384.0 mm(2)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 1.024 in(2)
    • 1.063 in(2)
    • 1.143 in(2)
    • 1.181 in(2)
    • 1.26 in(2)
    • 1.299 in(2)
    • 1.379 in(2)
    • 1.417 in(2)
    • 1.496 in(2)
    • 1.536 in(2)
    • 1.614 in(2)
    • 1.655 in(2)
    • 1.732 in(2)
    • 1.772 in(2)
    • 1.85 in(2)
    • 1.891 in(2)
    • 2.008 in(2)
    • 2.126 in(2)
    • 2.244 in(2)
    • 2.362 in(2)
    • 2.48 in(2)
    • 2.598 in(2)
    • 2.717 in(2)
    • 2.835 in(2)
    • 2.953 in(2)
    • 3.071 in(2)
    • 3.189 in(2)
    • 3.307 in(2)
    • 3.346 in(2)
    • 3.426 in(2)
    • 3.543 in(4)
    • 3.661 in(2)
    • 3.74 in(2)
    • 3.781 in(2)
    • 3.938 in(2)
    • 4.016 in(2)
    • 4.134 in(2)
    • 4.252 in(2)
    • 4.331 in(2)
    • 4.488 in(2)
    • 4.529 in(2)
    • 4.724 in(4)
    • 4.921 in(2)
    • 5.118 in(2)
    • 5.315 in(2)
    • 5.354 in(2)
    • 5.513 in(2)
    • 5.67 in(2)
    • 5.71 in(2)
    • 5.906 in(2)
    • 5.984 in(2)
    • 6.102 in(2)
    • 6.299 in(4)
    • 6.614 in(2)
    • 6.694 in(2)
    • 6.929 in(2)
    • 7.087 in(2)
    • 7.244 in(2)
    • 7.48 in(2)
    • 7.559 in(2)
    • 7.875 in(4)
    • 8.031 in(2)
    • 8.189 in(2)
    • 8.504 in(4)
    • 8.819 in(2)
    • 8.976 in(2)
    • 9.134 in(2)
    • 9.449 in(4)
    • 9.764 in(2)
    • 9.921 in(2)
    • 10.079 in(2)
    • 10.394 in(2)
    • 10.709 in(2)
    • 10.866 in(2)
    • 11.339 in(4)
    • 11.811 in(2)
    • 11.969 in(2)
    • 12.283 in(2)
    • 12.598 in(2)
    • 12.756 in(2)
    • 13.228 in(2)
    • 13.701 in(2)
    • 14.173 in(2)
    • 14.646 in(2)
    • 15.118 in(2)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Connection Style
    Connection Style
    • Cylindrical Shank 1 Flat (152)
    • Straight-Cylindrical w/Flange (32)
    Number of Flutes
    Number of Flutes
    • 2 (184)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 4.173 in(2)
    • 4.291 in(2)
    • 4.646 in(2)
    • 4.764 in(2)
    • 4.882 in(2)
    • 5.0 in(2)
    • 5.118 in(2)
    • 5.157 in(2)
    • 5.236 in(2)
    • 5.354 in(2)
    • 5.513 in(2)
    • 5.63 in(2)
    • 5.748 in(4)
    • 5.867 in(2)
    • 5.945 in(2)
    • 5.984 in(2)
    • 6.102 in(4)
    • 6.22 in(2)
    • 6.299 in(2)
    • 6.339 in(2)
    • 6.457 in(2)
    • 6.496 in(2)
    • 6.654 in(2)
    • 6.772 in(2)
    • 6.969 in(2)
    • 7.165 in(2)
    • 7.244 in(2)
    • 7.323 in(2)
    • 7.521 in(4)
    • 7.678 in(2)
    • 7.756 in(2)
    • 7.875 in(2)
    • 8.031 in(4)
    • 8.228 in(2)
    • 8.268 in(2)
    • 8.504 in(2)
    • 8.544 in(2)
    • 8.898 in(2)
    • 8.937 in(2)
    • 8.976 in(2)
    • 9.214 in(2)
    • 9.331 in(2)
    • 9.449 in(2)
    • 9.488 in(2)
    • 9.685 in(2)
    • 9.724 in(2)
    • 9.882 in(2)
    • 9.961 in(2)
    • 10.039 in(2)
    • 10.236 in(4)
    • 10.472 in(2)
    • 10.63 in(2)
    • 10.749 in(2)
    • 10.984 in(2)
    • 11.182 in(2)
    • 11.378 in(2)
    • 11.654 in(2)
    • 11.733 in(2)
    • 11.89 in(2)
    • 12.166 in(2)
    • 12.283 in(2)
    • 12.48 in(2)
    • 12.638 in(2)
    • 12.677 in(2)
    • 13.031 in(4)
    • 13.189 in(2)
    • 13.387 in(2)
    • 13.544 in(2)
    • 13.781 in(2)
    • 14.094 in(2)
    • 14.134 in(2)
    • 14.528 in(2)
    • 14.606 in(2)
    • 15.157 in(2)
    • 15.669 in(2)
    • 15.827 in(2)
    • 16.378 in(2)
    • 16.417 in(2)
    • 16.89 in(2)
    • 17.165 in(2)
    • 17.441 in(2)
    • 17.913 in(2)
    • 17.953 in(2)
    • 18.504 in(2)
    • 19.017 in(2)
    • 19.567 in(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 106.0 mm(2)
    • 109.0 mm(2)
    • 118.0 mm(2)
    • 121.0 mm(2)
    • 124.0 mm(2)
    • 127.0 mm(2)
    • 130.0 mm(2)
    • 131.0 mm(2)
    • 133.0 mm(2)
    • 136.0 mm(2)
    • 140.0 mm(2)
    • 143.0 mm(2)
    • 146.0 mm(4)
    • 149.0 mm(2)
    • 151.0 mm(2)
    • 152.0 mm(2)
    • 155.0 mm(4)
    • 158.0 mm(2)
    • 160.0 mm(2)
    • 161.0 mm(2)
    • 164.0 mm(2)
    • 165.0 mm(2)
    • 169.0 mm(2)
    • 172.0 mm(2)
    • 177.0 mm(2)
    • 182.0 mm(2)
    • 184.0 mm(2)
    • 186.0 mm(2)
    • 191.0 mm(4)
    • 195.0 mm(2)
    • 197.0 mm(2)
    • 200.0 mm(2)
    • 204.0 mm(4)
    • 209.0 mm(2)
    • 210.0 mm(2)
    • 216.0 mm(2)
    • 217.0 mm(2)
    • 226.0 mm(2)
    • 227.0 mm(2)
    • 228.0 mm(2)
    • 234.0 mm(2)
    • 237.0 mm(2)
    • 240.0 mm(2)
    • 241.0 mm(2)
    • 246.0 mm(2)
    • 247.0 mm(2)
    • 251.0 mm(2)
    • 253.0 mm(2)
    • 255.0 mm(2)
    • 260.0 mm(4)
    • 266.0 mm(2)
    • 270.0 mm(2)
    • 273.0 mm(2)
    • 279.0 mm(2)
    • 284.0 mm(2)
    • 289.0 mm(2)
    • 296.0 mm(2)
    • 298.0 mm(2)
    • 302.0 mm(2)
    • 309.0 mm(2)
    • 312.0 mm(2)
    • 317.0 mm(2)
    • 321.0 mm(2)
    • 322.0 mm(2)
    • 331.0 mm(4)
    • 335.0 mm(2)
    • 340.0 mm(2)
    • 344.0 mm(2)
    • 350.0 mm(2)
    • 358.0 mm(2)
    • 359.0 mm(2)
    • 369.0 mm(2)
    • 371.0 mm(2)
    • 385.0 mm(2)
    • 398.0 mm(2)
    • 402.0 mm(2)
    • 416.0 mm(2)
    • 417.0 mm(2)
    • 429.0 mm(2)
    • 436.0 mm(2)
    • 443.0 mm(2)
    • 455.0 mm(2)
    • 456.0 mm(2)
    • 470.0 mm(2)
    • 483.0 mm(2)
    • 497.0 mm(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(256)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(256)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • WM15PD (284)
    • WP40PD (340)
    Hand Of Tool
    Hand Of Tool
    • R (184)
    Wiper Insert
    Wiper Insert
    • N (256)
    Drill Type
    Drill Type
    • 86-01 (184)
    frontEnd
    Point Angle
    Point Angle
    • 140.0 (384)
    • 150.0 (240)
    Point Angle MinkomuPoint Angle Max
    insertGeometry
    Shape
    Shape
    • TDMX DRILL (256)
    Insert Seat Size
    Insert Seat Size
    • A (14)
    • B (17)
    • C (12)
    • D (20)
    • E (26)
    • F (8)
    • G (10)
    • H (8)
    • I (8)
    • J (17)
    • K (13)
    • L (8)
    • M (10)
    • N (10)
    • O (10)
    • P (9)
    • Q (11)
    • R (13)
    • S (12)
    • T (20)
    Cutting Tool Material
    Cutting Tool Material
    • H W (256)
    Cutting Diameter Insert
    Cutting Diameter Insert
    • 0.63 in(3)
    • 0.638 in(2)
    • 0.641 in(3)
    • 0.65 in(3)
    • 0.656 in(3)
    • 0.669 in(3)
    • 0.672 in(3)
    • 0.689 in(2)
    • 0.69 in(3)
    • 0.694 in(2)
    • 0.702 in(2)
    • 0.704 in(2)
    • 0.709 in(3)
    • 0.719 in(2)
    • 0.728 in(3)
    • 0.734 in(2)
    • 0.74 in(2)
    • 0.748 in(3)
    • 0.75 in(3)
    • 0.756 in(2)
    • 0.759 in(2)
    • 0.766 in(2)
    • 0.768 in(3)
    • 0.776 in(2)
    • 0.781 in(3)
    • 0.787 in(3)
    • 0.791 in(2)
    • 0.795 in(2)
    • 0.797 in(2)
    • 0.799 in(2)
    • 0.803 in(2)
    • 0.807 in(3)
    • 0.811 in(2)
    • 0.814 in(2)
    • 0.816 in(2)
    • 0.82 in(2)
    • 0.824 in(2)
    • 0.828 in(3)
    • 0.844 in(2)
    • 0.846 in(3)
    • 0.866 in(3)
    • 0.875 in(2)
    • 0.884 in(2)
    • 0.886 in(3)
    • 0.906 in(3)
    • 0.925 in(3)
    • 0.937 in(2)
    • 0.946 in(3)
    • 0.965 in(3)
    • 0.969 in(2)
    • 0.984 in(3)
    • 1.0 in(3)
    • 1.004 in(3)
    • 1.012 in(4)
    • 1.014 in(2)
    • 1.016 in(2)
    • 1.024 in(3)
    • 1.032 in(2)
    • 1.039 in(3)
    • 1.043 in(3)
    • 1.047 in(2)
    • 1.063 in(3)
    • 1.083 in(3)
    • 1.094 in(2)
    • 1.102 in(3)
    • 1.109 in(2)
    • 1.122 in(3)
    • 1.125 in(2)
    • 1.143 in(3)
    • 1.156 in(2)
    • 1.161 in(3)
    • 1.172 in(2)
    • 1.181 in(3)
    • 1.188 in(2)
    • 1.201 in(3)
    • 1.219 in(2)
    • 1.22 in(3)
    • 1.24 in(3)
    • 1.25 in(3)
    • 1.26 in(3)
    • 1.28 in(3)
    • 1.299 in(3)
    • 1.313 in(2)
    • 1.339 in(3)
    • 1.344 in(2)
    • 1.375 in(2)
    • 1.379 in(3)
    • 1.399 in(3)
    • 1.417 in(3)
    • 1.437 in(3)
    • 1.457 in(3)