Řada GT - Větrná energie
Filtry
Filtry
Zobrazit filtry v
MetrickéPalcové
Workpiece Material
Workpiece Material
- P Steel (7)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(7)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(7)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(7)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(7)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(7)
- M Stainless Steel (1)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1)
- S High-Temp Alloys (6)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(6)
Select All Star
- US (2)
Applications
Applications
Tapping Blind Hole (3)
Tapping Through Hole (3)
Threading (7)
Cutting Length
Cutting Length
- 30.0 mm(4)
- 35.0 mm(2)
- 40.0 mm(1)
komu
Cutting Length
Cutting Length
- 1.18 in(4)
- 1.38 in(2)
- 1.57 in(1)
komu
Thread Size
Thread Size
- M24 X 3 (4)
- M30 X 3.5 (2)
- M36 X 4 (1)
Number of Flutes
Number of Flutes
- 4 (1)
- 5 (6)
Over All Length [L]
Over All Length [L]
- 6.3 in(3)
- 7.09 in(2)
- 7.87 in(2)
komu
Over All Length [L]
Over All Length [L]
- 160.0 mm(3)
- 180.0 mm(2)
- 200.0 mm(2)
komu
application
Coating
Coating
- TiCN (6)
Tap Standard
Tap Standard
- DIN 376 (6)
frontEnd
Thread Pitch
Thread Pitch
- 3.0 mm(4)
- 3.5 mm(2)
- 4.0 mm(1)
komu
Thread Pitch
Thread Pitch
- 3.0 in(4)
- 3.5 in(2)
- 4.0 in(1)
komu
Chamfer Form
Chamfer Form
- PC (3)
- SB (4)
backEnd
Back-End Diameter
Back-End Diameter
- 18.0 mm(4)
- 22.0 mm(2)
- 28.0 mm(1)
komu
Back-End Diameter
Back-End Diameter
- 0.7087 in(4)
- 0.8661 in(2)
- 1.1024 in(1)
komu
No filters matching ""
