Oznámení

Označit vše jako přečtené
Mobile Menu

TopGroove™

Vybrat filtry
Filters
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (462)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (462)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (462)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (462)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (462)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (462)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (462)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (462)
  • M Stainless Steel (474)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (474)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (474)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (474)
  • K Cast Iron (473)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (473)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (473)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (473)
  • N Non-Ferrous Materials (474)
    • N1
      Wrought Aluminum
      (474)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (474)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (474)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (94)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (474)
    • N6
      Carbon, Graphite Composites, CFRP
      (474)
    • N7
      MMC's
      (94)
  • S High-Temp Alloys (474)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (474)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (474)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (474)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (474)
  • H Hardened Materials (35)
    • H1
      Hardened Materials 44-48 HRC
      (35)
    • H2
      Hardened Materials 48-55 HRC
      (35)
Select All Star
  • DE (15)
  • IN (3)
  • US (190)
Applications
Applications
  • Boring Boring (3)
  • Face Grooving Face Grooving (425)
  • Grooving Grooving (421)
  • ID Grooving ID Grooving (305)
  • ID Thread Turning ID Thread Turning (44)
  • OD Thread Turning OD Thread Turning (66)
  • Plunge Turning Plunge Turning (264)
  • Profiling Profiling (82)
  • Threading Threading (67)
  • Turning Turning (3)
Type of Thread
Type of Thread
  • 60 (106)
  • ACME (65)
  • API RD (44)
  • BSW (23)
  • BUTTRESS (21)
  • STUB ACME (44)
  • UN (92)
  • UNJ (23)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (449)
  • Lightly Interrupted Cut (449)
  • Smooth Cut (465)
  • Varying Depth of Cut (457)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (110)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (44)
  • Toolholder (47)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (173)
  • 2.0 (402)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.003 in (72)
  • 0.004 in (89)
  • 0.006 in (9)
  • 0.007 in (98)
  • 0.008 in (277)
  • 0.01 in (51)
  • 0.012 in (23)
  • 0.014 in (75)
  • 0.017 in (44)
  • 0.02 in (43)
  • 0.023 in (99)
  • 0.03 in (43)
  • 0.031 in (99)
  • 0.039 in (90)
  • 0.047 in (93)
  • 0.049 in (86)
  • 0.06 in (89)
  • 0.062 in (48)
  • 0.063 in (75)
  • 0.069 in (87)
  • 0.078 in (47)
  • 0.079 in (66)
  • 0.089 in (64)
  • 0.095 in (67)
  • 0.098 in (20)
  • 0.125 in (24)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.076 mm (72)
  • 0.1 mm (89)
  • 0.151 mm (9)
  • 0.176 mm (98)
  • 0.2 mm (277)
  • 0.225 mm (23)
  • 0.25 mm (51)
  • 0.301 mm (23)
  • 0.325 mm (75)
  • 0.351 mm (44)
  • 0.426 mm (44)
  • 0.5 mm (43)
  • 0.576 mm (99)
  • 0.75 mm (43)
  • 0.775 mm (99)
  • 1.0 mm (90)
  • 1.201 mm (93)
  • 1.25 mm (86)
  • 1.5 mm (89)
  • 1.576 mm (48)
  • 1.6 mm (75)
  • 1.75 mm (87)
  • 1.975 mm (47)
  • 2.0 mm (66)
  • 2.25 mm (64)
  • 2.401 mm (67)
  • 2.5 mm (20)
  • 3.176 mm (24)
Corner Radius Min komu Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (365)
Corner Chamfer Min komu Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (365)
Corner Chamfer Min komu Corner Chamfer Max
application
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (348)
  • Lightly Interrupted Cut (348)
  • Smooth Cut (359)
  • Varying Depth of Cut (356)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (94)
  • TN10P (69)
  • TN6010 (230)
  • TN6025 (336)
  • TN7110 (101)
  • WU10HT (24)
  • WU10PT (35)
  • WU25PT (22)
Hand Of Tool
Hand Of Tool
  • L (34)
  • R (57)
Wiper Insert
Wiper Insert
  • N (474)
F Dimension
F Dimension
  • 6.551 mm (2)
  • 7.0 mm (2)
  • 10.3 mm (1)
  • 11.0 mm (4)
  • 11.101 mm (2)
  • 12.0 mm (1)
  • 12.701 mm (5)
  • 13.0 mm (2)
  • 14.275 mm (3)
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 16.25 mm (2)
  • 17.0 mm (4)
  • 17.475 mm (4)
  • 19.05 mm (1)
  • 19.425 mm (1)
  • 20.0 mm (1)
  • 22.0 mm (2)
  • 22.225 mm (2)
  • 25.0 mm (3)
  • 25.401 mm (8)
  • 27.0 mm (3)
  • 31.75 mm (16)
  • 32.0 mm (7)
  • 32.525 mm (1)
  • 34.926 mm (2)
  • 35.0 mm (1)
  • 38.1 mm (4)
  • 40.0 mm (2)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.258 in (2)
  • 0.276 in (2)
  • 0.406 in (1)
  • 0.433 in (4)
  • 0.437 in (2)
  • 0.473 in (1)
  • 0.5 in (5)
  • 0.512 in (2)
  • 0.562 in (3)
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.64 in (2)
  • 0.669 in (4)
  • 0.689 in (4)
  • 0.75 in (1)
  • 0.765 in (1)
  • 0.787 in (1)
  • 0.866 in (2)
  • 0.875 in (2)
  • 0.984 in (3)
  • 1.0 in (8)
  • 1.063 in (3)
  • 1.25 in (16)
  • 1.26 in (7)
  • 1.281 in (1)
  • 1.375 in (2)
  • 1.379 in (1)
  • 1.5 in (4)
  • 1.575 in (2)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (54)
  • 11.175 mm (2)
  • 11.5 mm (2)
  • 18.5 mm (2)
  • 18.55 mm (2)
  • 20.326 mm (1)
  • 22.0 mm (2)
  • 25.401 mm (2)
  • 26.0 mm (2)
  • 28.576 mm (2)
  • 34.0 mm (4)
  • 34.926 mm (4)
  • 41.301 mm (28)
  • 44.0 mm (2)
  • 44.45 mm (2)
  • 47.6 mm (26)
  • 50.801 mm (2)
  • 54.0 mm (3)
  • 55.875 mm (1)
  • 56.625 mm (3)
  • 57.151 mm (3)
  • 57.2 mm (12)
  • 60.325 mm (2)
  • 63.5 mm (7)
  • 69.851 mm (2)
  • 70.0 mm (1)
  • 76.2 mm (1)
  • 88.9 mm (139)
  • 139.701 mm (164)
  • 174.601 mm (56)
  • 209.601 mm (43)
  • 222.3 mm (26)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (54)
  • 0.44 in (2)
  • 0.453 in (2)
  • 0.728 in (2)
  • 0.73 in (2)
  • 0.8 in (1)
  • 0.866 in (2)
  • 1.0 in (2)
  • 1.024 in (2)
  • 1.125 in (2)
  • 1.339 in (4)
  • 1.375 in (4)
  • 1.627 in (28)
  • 1.732 in (2)
  • 1.75 in (2)
  • 1.874 in (26)
  • 2.0 in (2)
  • 2.126 in (3)
  • 2.2 in (1)
  • 2.229 in (3)
  • 2.25 in (3)
  • 2.253 in (12)
  • 2.375 in (2)
  • 2.5 in (7)
  • 2.75 in (2)
  • 2.757 in (1)
  • 3.0 in (1)
  • 3.5 in (139)
  • 5.5 in (164)
  • 6.875 in (56)
  • 8.252 in (43)
  • 8.752 in (26)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (470)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (470)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (51)
  • S (40)
Rake Angle Style
Rake Angle Style
  • NEUTRAL (ZERO) (91)
Maximum Bore Depth
Maximum Bore Depth
  • 1.0 in (7)
  • 1.23 in (1)
  • 1.232 in (1)
  • 1.29 in (1)
  • 1.5 in (1)
  • 1.891 in (2)
  • 2.0 in (14)
  • 2.5 in (3)
  • 2.52 in (2)
  • 3.0 in (2)
  • 3.15 in (2)
  • 3.938 in (4)
  • 4.0 in (6)
  • 5.0 in (3)
  • 5.039 in (2)
  • 6.0 in (2)
  • 6.299 in (3)
  • 7.0 in (2)
  • 7.875 in (1)
  • 8.0 in (4)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 25.401 mm (7)
  • 31.25 mm (1)
  • 31.3 mm (1)
  • 32.775 mm (1)
  • 38.1 mm (1)
  • 48.0 mm (2)
  • 50.801 mm (14)
  • 63.5 mm (3)
  • 64.0 mm (2)
  • 76.2 mm (2)
  • 80.0 mm (2)
  • 100.0 mm (4)
  • 101.601 mm (6)
  • 127.0 mm (3)
  • 128.0 mm (2)
  • 152.4 mm (2)
  • 160.0 mm (3)
  • 177.8 mm (2)
  • 200.0 mm (1)
  • 203.201 mm (4)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (44)
frontEnd
Clamp Style
Clamp Style
  • N (110)
Cutting Width
Cutting Width
  • 0.02 in (42)
  • 0.031 in (50)
  • 0.039 in (92)
  • 0.041 in (24)
  • 0.047 in (106)
  • 0.055 in (43)
  • 0.058 in (41)
  • 0.06 in (96)
  • 0.061 in (25)
  • 0.062 in (125)
  • 0.067 in (42)
  • 0.069 in (87)
  • 0.073 in (46)
  • 0.077 in (43)
  • 0.078 in (48)
  • 0.079 in (108)
  • 0.088 in (87)
  • 0.089 in (89)
  • 0.095 in (118)
  • 0.098 in (98)
  • 0.108 in (89)
  • 0.119 in (124)
  • 0.125 in (145)
  • 0.126 in (46)
  • 0.128 in (86)
  • 0.138 in (110)
  • 0.147 in (25)
  • 0.152 in (41)
  • 0.156 in (52)
  • 0.157 in (76)
  • 0.167 in (45)
  • 0.177 in (69)
  • 0.188 in (56)
  • 0.189 in (82)
  • 0.192 in (25)
  • 0.193 in (24)
  • 0.195 in (46)
  • 0.197 in (22)
  • 0.217 in (19)
  • 0.237 in (19)
  • 0.25 in (31)
Cutting Width Min komu Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (42)
  • 0.775 mm (46)
  • 0.8 mm (43)
  • 1.0 mm (92)
  • 1.05 mm (24)
  • 1.201 mm (106)
  • 1.401 mm (43)
  • 1.475 mm (41)
  • 1.5 mm (96)
  • 1.55 mm (25)
  • 1.576 mm (125)
  • 1.701 mm (42)
  • 1.75 mm (87)
  • 1.826 mm (46)
  • 1.951 mm (43)
  • 1.975 mm (48)
  • 2.0 mm (108)
  • 2.2 mm (87)
  • 2.25 mm (89)
  • 2.401 mm (118)
  • 2.5 mm (98)
  • 2.75 mm (89)
  • 3.0 mm (124)
  • 3.176 mm (145)
  • 3.2 mm (46)
  • 3.25 mm (86)
  • 3.5 mm (110)
  • 3.725 mm (25)
  • 3.85 mm (41)
  • 3.95 mm (51)
  • 3.975 mm (24)
  • 4.0 mm (76)
  • 4.25 mm (45)
  • 4.5 mm (69)
  • 4.775 mm (56)
  • 4.801 mm (82)
  • 4.875 mm (25)
  • 4.9 mm (24)
  • 4.95 mm (46)
  • 5.0 mm (22)
  • 5.5 mm (19)
  • 6.0 mm (19)
  • 6.351 mm (31)
Cutting Width Min komu Cutting Width Max
Insert Size
Insert Size
  • 1 (6)
  • 2 (41)
  • 3 (46)
  • 4 (15)
  • 6 (2)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.067 in (1)
  • 0.138 in (23)
  • 0.21 in (27)
  • 0.225 in (1)
  • 0.294 in (13)
  • 0.334 in (2)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 1.701 mm (1)
  • 3.5 mm (23)
  • 5.325 mm (27)
  • 5.726 mm (1)
  • 7.476 mm (13)
  • 8.475 mm (2)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
  • 0.65 mm (3)
  • 0.75 mm (30)
  • 1.026 mm (55)
  • 1.05 mm (3)
  • 1.1 mm (42)
  • 1.901 mm (2)
  • 1.975 mm (4)
  • 2.551 mm (3)
  • 2.75 mm (2)
  • 2.926 mm (32)
  • 3.801 mm (10)
  • 3.85 mm (3)
Maximum Cutting Insert Depth Min komu Maximum Cutting Insert Depth Max
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
  • 0.027 in (3)
  • 0.03 in (30)
  • 0.04 in (55)
  • 0.041 in (3)
  • 0.044 in (42)
  • 0.075 in (2)
  • 0.078 in (4)
  • 0.1 in (3)
  • 0.108 in (2)
  • 0.115 in (32)
  • 0.15 in (10)
  • 0.152 in (3)
Maximum Cutting Insert Depth Min komu Maximum Cutting Insert Depth Max
insertGeometry
Shape
Shape
  • TN-TOP NOTCH (365)
Insert Seat Size
Insert Seat Size
  • 1 (3)
  • 2 (119)
  • 3 (192)
  • 4 (51)
Cutting Tool Material
Cutting Tool Material
  • H W (474)
backEnd
Connection Type
Connection Type
  • BORING BAR (44)
  • SQUARE SHANK (47)
Back-End Diameter
Back-End Diameter
  • 9.525 mm (1)
  • 10.0 mm (1)
  • 12.0 mm (3)
  • 12.701 mm (3)
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 19.05 mm (2)
  • 20.0 mm (2)
  • 25.0 mm (4)
  • 25.401 mm (6)
  • 31.75 mm (3)
  • 32.0 mm (2)
  • 38.1 mm (2)
  • 40.0 mm (3)
  • 44.45 mm (2)
  • 50.0 mm (1)
  • 50.801 mm (4)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.375 in (1)
  • 0.394 in (1)
  • 0.473 in (3)
  • 0.5 in (3)
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.75 in (2)
  • 0.787 in (2)
  • 0.984 in (4)
  • 1.0 in (6)
  • 1.25 in (3)
  • 1.26 in (2)
  • 1.5 in (2)
  • 1.575 in (3)
  • 1.75 in (2)
  • 1.969 in (1)
  • 2.0 in (4)
Back-End Diameter Min komu Back-End Diameter Max
Shank Height
Shank Height
  • 0.375 in (1)
  • 0.473 in (2)
  • 0.5 in (4)
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.75 in (6)
  • 0.787 in (4)
  • 0.984 in (6)
  • 1.0 in (12)
  • 1.25 in (5)
  • 1.26 in (2)
Shank Height Min komu Shank Height Max
Shank Height
Shank Height
  • 9.525 mm (1)
  • 12.0 mm (2)
  • 12.701 mm (4)
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 19.05 mm (6)
  • 20.0 mm (4)
  • 25.0 mm (6)
  • 25.401 mm (12)
  • 31.75 mm (5)
  • 32.0 mm (2)
Shank Height Min