ROTAFLEX™

Vybrat filtry
Filters
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (3)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (3)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (3)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (3)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (3)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (3)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (3)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (3)
  • M Stainless Steel (3)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (3)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (3)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (3)
  • K Cast Iron (3)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (3)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (3)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (3)
  • N Non-Ferrous Materials (3)
    • N1
      Wrought Aluminum (3)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (3)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (3)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (3)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (3)
    • N6
      Carbon, Graphite Composites, CFRP (3)
    • N7
      MMC's (3)
  • S High-Temp Alloys (3)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (3)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (3)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (3)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (3)
  • H Hardened Materials (3)
    • H1
      Hardened Materials 44-48 HRC (3)
    • H2
      Hardened Materials 48-55 HRC (3)
    • H3
      Hardened Materials 56-60 HRC (3)
    • H4
      Hardened Materials >60 HRC (3)
Applications
Applications
  • Blind Hole Finishing Blind Hole Finishing (3)
  • Through Hole Finishing Through Hole Finishing (3)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (3)
  • Lightly Interrupted Cut (3)
  • Smooth Cut (3)
  • Varying Depth of Cut (3)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 53.0 (1)
  • 90.0 (3)
  • 95.0 (1)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Over All Length [L]
Over All Length [L]
  • 1.792 in (3)
  • 1.811 in (1)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 45.5 mm (3)
  • 46.0 mm (1)
Over All Length [L] Min komu Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (1)
  • 0.008 in (3)
  • 0.016 in (3)
  • 0.031 in (3)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (1)
  • 0.2 mm (3)
  • 0.4 mm (3)
  • 0.8 mm (3)
Corner Radius Min komu Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (3)
Corner Chamfer Min komu Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (3)
Corner Chamfer Min komu Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • HCK10 (2)
  • HK1500 (2)
  • HK35 (2)
  • HWK10 (1)
  • HWK15 (2)
  • PB100 (3)
  • PB170 (3)
  • PB250 (3)
  • PB300 (3)
  • PD100 (2)
  • PD50 (2)
  • SP0G00 (1)
  • THM (3)
  • THM-X (2)
  • TN1000 (2)
  • TN10P (3)
  • TN10U (3)
  • TN15M (3)
  • TN15U (3)
  • TN2000 (2)
  • TN20K (3)
  • TN20P (3)
  • TN30M (3)
  • TN4000 (2)
  • TN5015 (3)
  • TN5020 (2)
  • TN5105 (3)
  • TN5120 (3)
  • TN7010 (2)
  • TN7015 (3)
  • TN7025 (2)
  • TN7035 (2)
  • TN7105 (3)
  • TN7110 (3)
  • TN7115 (3)
  • TN7125 (3)
  • TN7135 (3)
  • TN8025 (2)
  • TTI15 (3)
  • TTM09 (1)
  • TTR (3)
  • TTS (2)
  • WBH10C (2)
  • WBH10P (2)
  • WBH10U (3)
  • WBH20P (1)
  • WBH25P (3)
  • WBK45U (1)
  • WDN00U (2)
  • WDN25U (3)
  • WK05CT (3)
  • WK15CT (3)
  • WK20CT (3)
  • WM15CT (3)
  • WM25CT (3)
  • WP15CT (3)
  • WP20TT (3)
  • WP25CT (3)
  • WS10PT (2)
  • WS25PT (2)
  • WU05PT (3)
  • WU10HT (3)
  • WU10PT (3)
  • WU20HT (2)
  • WU25PT (3)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 50.0 mm (1)
  • 88.0 mm (1)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.969 in (1)
  • 3.465 in (1)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 2.559 in (1)
  • 4.529 in (1)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 65.0 mm (1)
  • 115.0 mm (1)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
frontEnd
Clamp Style
Clamp Style
  • S (1)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (2)
  • D-DIAMOND/RHOMBIC 55 (1)
  • T-TRIANGLE 60 (2)
Maximum Cutting Depth
Maximum Cutting Depth
  • 1.28 in (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 32.5 mm (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (3)
  • B L (3)
  • C N (2)
  • D P (3)
  • H T (3)
  • H W (3)
No filters matching ""
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?