Řada M94

Vybrat filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (6)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(6)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(6)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(6)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1)
    • M Stainless Steel (1)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1)
    • K Cast Iron (7)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(7)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(7)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(7)
    • N Non-Ferrous Materials (7)
      • N1
        Wrought Aluminum (7)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(7)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(7)
    Applications
    Applications
    • Slot MillingSlot Milling (4)
    • Slot SideSlot Side (4)
    Cutting Diameter
    Cutting Diameter
    • 0.984 in(1)
    • 1.575 in(1)
    • 2.48 in(1)
    • 3.15 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 25.0 mm(1)
    • 40.0 mm(1)
    • 63.0 mm(1)
    • 80.0 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Reach
    Reach
    • 1.575 in(1)
    • 1.732 in(1)
    • 1.969 in(2)
    Reach MinkomuReach Max
    Reach
    Reach
    • 40.0 mm(1)
    • 44.0 mm(1)
    • 50.0 mm(2)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (4)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (2)
    • Weldon With Thread (2)
    Number of Flutes
    Number of Flutes
    • 3 (2)
    • 6 (2)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 3.0 (10)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(1)
    • 1.969 in(1)
    • 3.938 in(1)
    • 4.331 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(1)
    • 50.0 mm(1)
    • 100.0 mm(1)
    • 110.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(10)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(10)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(10)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(10)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM (7)
    • TTM (3)
    • TTM08 (6)
    Hand Of Tool
    Hand Of Tool
    • R (4)
    Wiper Insert
    Wiper Insert
    • N (7)
    frontEnd
    Cutting Width
    Cutting Width
    • 0.076 in(1)
    • 0.088 in(1)
    • 0.107 in(3)
    • 0.128 in(3)
    • 0.167 in(2)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 1.925 mm(1)
    • 2.225 mm(1)
    • 2.725 mm(3)
    • 3.25 mm(3)
    • 4.25 mm(2)
    Cutting Width MinkomuCutting Width Max
    Insert Shape
    Insert Shape
    • ON EDGE MISC (10)
    Neck Diameter
    Neck Diameter
    • 0.807 in(1)
    • 1.252 in(1)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 20.5 mm(1)
    • 31.8 mm(1)
    Neck Diameter MinkomuNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • ON EDGE MISC (7)
    Insert IC Size
    Insert IC Size
    • 6.351 mm(2)
    • 9.525 mm(5)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.25 in(2)
    • 0.375 in(5)
    Insert IC Size MinkomuInsert IC Size Max
    Cutting Tool Material
    Cutting Tool Material
    • H W (7)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (2)
    • SHELL MILL (2)
    Back-End Diameter
    Back-End Diameter
    • 22.0 mm(1)
    • 25.0 mm(1)
    • 27.0 mm(1)
    • 32.0 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.866 in(1)
    • 0.984 in(1)
    • 1.063 in(1)
    • 1.26 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?