Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

    Řada M4000

    Vybrat filtry
    Filtry
    Filtry
      Zobrazit filtry v
      Metrické
      Palcové
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (35)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(35)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(35)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(35)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(35)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(35)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(35)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(35)
      • M Stainless Steel (35)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(35)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(35)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(35)
      • K Cast Iron (35)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(35)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(35)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(35)
      • N Non-Ferrous Materials (31)
        • N1
          Wrought Aluminum (31)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(31)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(31)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (19)
        • N5
          Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (19)
        • N6
          Carbon, Graphite Composites, CFRP (19)
        • N7
          MMC's (19)
      • S High-Temp Alloys (35)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(34)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(34)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(34)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(35)
      • H Hardened Materials (31)
        • H1
          Hardened Materials 44-48 HRC(31)
      Applications
      Applications
      • Chamfer MillingChamfer Milling (4)
      • Face MillingFace Milling (35)
      • Shoulder MillingShoulder Milling (5)
      Cutting Diameter
      Cutting Diameter
      • 4.921 in(2)
      • 6.0 in(2)
      • 6.299 in(2)
      • 7.875 in(2)
      • 9.843 in(2)
      • 12.0 in(2)
      • 12.403 in(2)
      Cutting Diameter MinkomuCutting Diameter Max
      Cutting Diameter
      Cutting Diameter
      • 125.0 mm(2)
      • 152.4 mm(2)
      • 160.0 mm(2)
      • 200.0 mm(2)
      • 250.0 mm(2)
      • 304.8 mm(2)
      • 315.0 mm(2)
      Cutting Diameter MinkomuCutting Diameter Max
      Cutting Length
      Cutting Length
      • 1.0 mm(1)
      • 1.026 mm(1)
      • 3.5 mm(1)
      • 4.351 mm(1)
      • 4.7 mm(1)
      • 4.801 mm(1)
      • 6.0 mm(2)
      • 6.301 mm(1)
      • 8.0 mm(2)
      • 9.0 mm(2)
      • 9.8 mm(1)
      • 10.0 mm(1)
      • 11.5 mm(1)
      • 11.65 mm(1)
      • 12.0 mm(2)
      • 14.0 mm(1)
      • 14.9 mm(1)
      • 15.0 mm(1)
      • 15.9 mm(1)
      Cutting Length MinkomuCutting Length Max
      Cutting Length
      Cutting Length
      • 0.039 in(1)
      • 0.04 in(1)
      • 0.138 in(1)
      • 0.171 in(1)
      • 0.185 in(1)
      • 0.189 in(1)
      • 0.237 in(2)
      • 0.248 in(1)
      • 0.315 in(2)
      • 0.354 in(2)
      • 0.386 in(1)
      • 0.394 in(1)
      • 0.453 in(1)
      • 0.459 in(1)
      • 0.473 in(2)
      • 0.551 in(1)
      • 0.587 in(1)
      • 0.591 in(1)
      • 0.626 in(1)
      Cutting Length MinkomuCutting Length Max
      Reach
      Reach
      • 2.48 in(6)
      • 2.677 in(2)
      • 3.15 in(6)
      Reach MinkomuReach Max
      Reach
      Reach
      • 63.0 mm(6)
      • 68.0 mm(2)
      • 80.0 mm(6)
      Reach MinkomuReach Max
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 32.0 (2)
      • 45.0 (5)
      • 58.0 (1)
      • 75.0 (4)
      • 88.85 (1)
      • 89.14 (1)
      • 90.0 (8)
      Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • A-Socket Head Cap Screw (4)
      • C-Bolt Circle (8)
      • SHCS or RetScrw Or BoltCircle (2)
      Number of Flutes
      Number of Flutes
      • 10 (1)
      • 12 (3)
      • 14 (1)
      • 16 (2)
      • 18 (1)
      • 22 (2)
      • 6 (1)
      • 8 (3)
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 1.85 in(16)
      • 1.851 in(1)
      • 1.854 in(6)
      • 2.48 in(6)
      • 2.677 in(2)
      • 3.15 in(6)
      Over All Length [L] MinkomuOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 47.0 mm(16)
      • 47.026 mm(1)
      • 47.1 mm(6)
      • 63.0 mm(6)
      • 68.0 mm(2)
      • 80.0 mm(6)
      Over All Length [L] MinkomuOver All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.0 in(20)
      • 0.008 in(15)
      • 0.016 in(19)
      • 0.031 in(21)
      • 0.038 in(15)
      • 0.044 in(15)
      • 0.047 in(26)
      • 0.052 in(16)
      • 0.063 in(24)
      • 0.066 in(15)
      • 0.075 in(15)
      • 0.079 in(18)
      • 0.094 in(14)
      • 0.095 in(17)
      • 0.098 in(15)
      • 0.122 in(15)
      • 0.125 in(15)
      • 0.126 in(20)
      • 0.157 in(16)
      • 0.171 in(16)
      • 0.237 in(15)
      • 0.315 in(15)
      • 1.969 in(14)
      Corner Radius MinkomuCorner Radius Max
      Corner Radius
      Corner Radius
      • 0.0 mm(20)
      • 0.2 mm(15)
      • 0.4 mm(19)
      • 0.775 mm(15)
      • 0.8 mm(21)
      • 0.976 mm(15)
      • 1.1 mm(15)
      • 1.201 mm(26)
      • 1.3 mm(16)
      • 1.6 mm(24)
      • 1.675 mm(15)
      • 1.901 mm(15)
      • 2.0 mm(18)
      • 2.375 mm(14)
      • 2.401 mm(17)
      • 2.5 mm(15)
      • 3.1 mm(15)
      • 3.176 mm(15)
      • 3.2 mm(20)
      • 4.0 mm(16)
      • 4.351 mm(16)
      • 6.0 mm(15)
      • 8.0 mm(15)
      • 50.0 mm(14)
      Corner Radius MinkomuCorner Radius Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 mm(34)
      • 0.65 mm(14)
      • 0.701 mm(15)
      • 1.0 mm(15)
      • 1.026 mm(16)
      • 1.401 mm(14)
      • 1.475 mm(15)
      • 1.5 mm(15)
      Corner Chamfer MinkomuCorner Chamfer Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 in(34)
      • 0.027 in(14)
      • 0.028 in(15)
      • 0.039 in(15)
      • 0.04 in(16)
      • 0.055 in(14)
      • 0.058 in(15)
      • 0.06 in(15)
      Corner Chamfer MinkomuCorner Chamfer Max
      application
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • THM (23)
      • THM-U (20)
      • THR (15)
      • TN2510 (21)
      • TN25M (22)
      • TN450 (24)
      • TN5015 (15)
      • TN5020 (15)
      • TN5505 (15)
      • TN5515 (30)
      • TN6501 (19)
      • TN6502 (15)
      • TN6505 (17)
      • TN6510 (21)
      • TN6520 (22)
      • TN6525 (25)
      • TN6540 (26)
      • TN7015 (15)
      • TN7035 (15)
      • TN7110 (15)
      • TN7135 (15)
      • TN7525 (25)
      • TN7535 (30)
      • TTI25 (23)
      • TTM (17)
      • TTM08 (22)
      • TTR (18)
      • WDN10U (15)
      • WK15CM (34)
      • WK15PM (18)
      • WK20PM (17)
      • WK25YM (16)
      • WN10HM (16)
      • WN25PM (19)
      • WP25PM (27)
      • WP35CM (35)
      • WP40PM (28)
      • WS30PM (23)
      • WS40PM (26)
      • WU10PM (16)
      • WU20PM (20)
      • WU35PM (18)
      Hand Of Tool
      Hand Of Tool
      • R (14)
      frontEnd
      Clamp Style
      Clamp Style
      • C (5)
      • S (18)
      Insert Shape
      Insert Shape
      • H-HEXAGON 120 (20)
      • R-ROUND (15)
      • S-SQUARE 90 (22)
      • T-TRIANGLE 60 (15)
      • X-PARALLELOGRAM 75 (2)
      • X-PARALLELOGRAM 80 (15)
      • X-RECTANGLE MILL 4 90 (17)
      Cartridge Size
      Cartridge Size
      • 15 - mm of Shank Height M400 (23)
      Center Cutting
      Center Cutting
      insertGeometry
      Cutting Tool Material
      Cutting Tool Material
      • C N (2)
      • D P (1)
      • H T (9)
      • H W (21)
      backEnd
      Connection Type
      Connection Type
      • SHELL MILL (14)
      Back-End Diameter
      Back-End Diameter
      • 40.0 mm(4)
      • 50.801 mm(2)
      • 60.0 mm(6)
      • 63.5 mm(2)
      Back-End Diameter MinkomuBack-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 1.575 in(4)
      • 2.0 in(2)
      • 2.362 in(6)
      • 2.5 in(2)
      Back-End Diameter MinkomuBack-End Diameter Max
      No filters matching ""
      Čelní frézy • M4000 • Nastavitelná tělesa kazetového frézovacího systému • Metrické
      (10)

      Čelní frézy • M4000 • Nastavitelná tělesa kazetového frézovacího systému • Metrické

      M4000 • Face Mills • Inch
      (4)

      M4000 • Face Mills • Inch

      Čelní frézy • M4000 • Kazetový frézovací systém • Metrické
      (23)

      Čelní frézy • M4000 • Kazetový frézovací systém • Metrické

      Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
      Select the destination where you want to move komu.
      Nové Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      Zadejte platný název
      product-image
      Please adjust the following properties from

      Katalogové číslo ISO

      Katalogové číslo ANSI

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

       

      Can’t find the file type you’re looking for?

      Abyste viděli informace ve svém panelu, musíte být přihlášeni.
      Session expired due to inactivity, please login again
      Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
      položek bylo úspěšně přidáno do košíku
      Zobrazit košík

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material NumberKatalogové číslo ISOKarbid  

      You are about to leave the Solution building process.

      Are you sure you want to leave?