Řada M170

Vybrat filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (65)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(65)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(65)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(65)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(60)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(60)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(60)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(60)
    • M Stainless Steel (60)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(60)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(60)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(60)
    • K Cast Iron (65)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(65)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(65)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(65)
    • S High-Temp Alloys (49)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(49)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(49)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(49)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(49)
    • H Hardened Materials (52)
      • H1
        Hardened Materials 44-48 HRC(52)
      • H2
        Hardened Materials 48-55 HRC(52)
      • H3
        Hardened Materials 56-60 HRC(52)
    Applications
    Applications
    • Face MillingFace Milling (47)
    • PocketPocket (47)
    • Pocket HelicalPocket Helical (47)
    • Pocket MillingPocket Milling (47)
    • Profile MillingProfile Milling (47)
    • RampingRamping (47)
    • Shoulder Ball NoseShoulder Ball Nose (47)
    • Shoulder MillingShoulder Milling (47)
    • Slot MillingSlot Milling (47)
    • Slot Square EndSlot Square End (47)
    Cutting Diameter
    Cutting Diameter
    • 0.197 in(4)
    • 0.315 in(4)
    • 0.354 in(3)
    • 0.394 in(5)
    • 0.473 in(1)
    • 0.512 in(3)
    • 0.591 in(4)
    • 0.63 in(1)
    • 0.709 in(1)
    • 0.787 in(2)
    • 0.906 in(2)
    • 1.102 in(1)
    • 1.181 in(1)
    • 1.26 in(2)
    • 1.339 in(1)
    • 1.417 in(1)
    • 1.496 in(1)
    • 1.575 in(2)
    • 1.655 in(1)
    • 1.85 in(1)
    • 2.008 in(1)
    • 2.126 in(1)
    • 2.52 in(1)
    • 2.677 in(1)
    • 3.465 in(1)
    • 4.291 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 5.0 mm(4)
    • 8.0 mm(4)
    • 9.0 mm(3)
    • 10.0 mm(5)
    • 12.0 mm(1)
    • 13.0 mm(3)
    • 15.0 mm(4)
    • 16.0 mm(1)
    • 18.0 mm(1)
    • 20.0 mm(2)
    • 23.0 mm(2)
    • 28.0 mm(1)
    • 30.0 mm(1)
    • 32.0 mm(2)
    • 34.0 mm(1)
    • 36.0 mm(1)
    • 38.0 mm(1)
    • 40.0 mm(2)
    • 42.0 mm(1)
    • 47.0 mm(1)
    • 51.0 mm(1)
    • 54.0 mm(1)
    • 64.0 mm(1)
    • 68.0 mm(1)
    • 88.0 mm(1)
    • 109.0 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 12.0 mm(4)
    • 15.0 mm(4)
    • 16.0 mm(3)
    • 20.0 mm(8)
    • 22.0 mm(1)
    • 25.0 mm(5)
    • 30.0 mm(1)
    • 32.0 mm(2)
    • 35.0 mm(2)
    • 40.0 mm(2)
    • 42.0 mm(2)
    • 50.0 mm(3)
    • 52.0 mm(3)
    • 63.0 mm(2)
    • 66.0 mm(1)
    • 80.0 mm(2)
    • 100.0 mm(1)
    • 125.0 mm(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.473 in(4)
    • 0.591 in(4)
    • 0.63 in(3)
    • 0.787 in(8)
    • 0.866 in(1)
    • 0.984 in(5)
    • 1.181 in(1)
    • 1.26 in(2)
    • 1.379 in(2)
    • 1.575 in(2)
    • 1.655 in(2)
    • 1.969 in(3)
    • 2.047 in(3)
    • 2.48 in(2)
    • 2.598 in(1)
    • 3.15 in(2)
    • 3.938 in(1)
    • 4.921 in(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 3.5 mm(15)
    • 5.0 mm(16)
    • 6.0 mm(10)
    • 8.0 mm(6)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.138 in(15)
    • 0.197 in(16)
    • 0.237 in(10)
    • 0.315 in(6)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 0.787 in(2)
    • 0.906 in(3)
    • 1.181 in(4)
    • 1.379 in(2)
    • 1.575 in(13)
    • 1.693 in(4)
    • 1.772 in(1)
    • 1.969 in(6)
    • 2.165 in(1)
    • 2.362 in(5)
    • 2.52 in(1)
    • 2.757 in(1)
    • 3.15 in(2)
    • 3.938 in(2)
    Reach MinkomuReach Max
    Reach
    Reach
    • 20.0 mm(2)
    • 23.0 mm(3)
    • 30.0 mm(4)
    • 35.0 mm(2)
    • 40.0 mm(13)
    • 43.0 mm(4)
    • 45.0 mm(1)
    • 50.0 mm(6)
    • 55.0 mm(1)
    • 60.0 mm(5)
    • 64.0 mm(1)
    • 70.0 mm(1)
    • 80.0 mm(2)
    • 100.0 mm(2)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (47)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (15)
    • B-Cutter Retention Screw (1)
    • Screw-On Connection (12)
    • Straight-Cylindrical (15)
    • Weldon (4)
    Number of Flutes
    Number of Flutes
    • 2 (18)
    • 3 (7)
    • 4 (7)
    • 5 (6)
    • 6 (6)
    • 7 (1)
    • 8 (2)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(8)
    • 1.602 in(3)
    • 1.969 in(8)
    • 2.165 in(1)
    • 2.244 in(2)
    • 2.362 in(1)
    • 2.657 in(4)
    • 2.736 in(1)
    • 3.543 in(1)
    • 3.938 in(1)
    • 4.331 in(4)
    • 4.529 in(1)
    • 4.724 in(1)
    • 4.921 in(1)
    • 5.513 in(3)
    • 5.906 in(2)
    • 6.299 in(2)
    • 7.087 in(2)
    • 8.661 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(8)
    • 40.7 mm(3)
    • 50.0 mm(8)
    • 55.0 mm(1)
    • 57.0 mm(2)
    • 60.0 mm(1)
    • 67.5 mm(4)
    • 69.5 mm(1)
    • 90.0 mm(1)
    • 100.0 mm(1)
    • 110.0 mm(4)
    • 115.0 mm(1)
    • 120.0 mm(1)
    • 125.0 mm(1)
    • 140.0 mm(3)
    • 150.0 mm(2)
    • 160.0 mm(2)
    • 180.0 mm(2)
    • 220.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.138 in(20)
    • 0.197 in(21)
    • 0.237 in(15)
    • 0.315 in(9)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 3.5 mm(20)
    • 5.0 mm(21)
    • 6.0 mm(15)
    • 8.0 mm(9)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • TN2505 (52)
    • TN6525 (54)
    • TN6540 (53)
    Hand Of Tool
    Hand Of Tool
    • R (47)
    Wiper Insert
    Wiper Insert
    • N (18)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 2.2 (2)
    • 3.0 (2)
    • 3.5 (1)
    • 4.5 (3)
    • 5.2 (1)
    • 5.5 (1)
    • 5.8 (1)
    • 6.0 (1)
    • 6.1 (1)
    • 7.2 (1)
    • 8.0 (1)
    • 8.2 (1)
    • 8.5 (2)
    • 9.0 (6)
    • 9.3 (1)
    • 10.0 (1)
    • 10.5 (1)
    • 11.0 (1)
    • 12.0 (4)
    • 12.5 (1)
    • 18.0 (4)
    • 20.0 (6)
    • 22.0 (4)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 1.063 in(1)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 27.0 mm(1)
    Neck Diameter MinkomuNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • R-ROUND (18)
    Insert IC Size
    Insert IC Size
    • 7.0 mm(5)
    • 10.0 mm(5)
    • 12.0 mm(5)
    • 16.0 mm(3)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.276 in(5)
    • 0.394 in(5)
    • 0.473 in(5)
    • 0.63 in(3)
    Insert IC Size MinkomuInsert IC Size Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • MH (13)
    • MM (5)
    Cutting Tool Material
    Cutting Tool Material
    • H W (18)
    Tolerance Class
    Tolerance Class
    • H (2)
    • P (16)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (19)
    • SCREW-ON (12)
    • SHELL MILL (16)
    Back-End Diameter
    Back-End Diameter
    • 12.0 mm(1)
    • 12.8 mm(1)
    • 13.0 mm(2)
    • 16.0 mm(10)
    • 18.0 mm(2)
    • 20.0 mm(5)
    • 21.0 mm(2)
    • 22.0 mm(8)
    • 25.0 mm(5)
    • 27.0 mm(3)
    • 29.0 mm(5)
    • 32.0 mm(2)
    • 40.0 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.473 in(1)
    • 0.504 in(1)
    • 0.512 in(2)
    • 0.63 in(10)
    • 0.709 in(2)
    • 0.787 in(5)
    • 0.828 in(2)
    • 0.866 in(8)
    • 0.984 in(5)
    • 1.063 in(3)
    • 1.143 in(5)
    • 1.26 in(2)
    • 1.575 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)