Řada M25

Vybrat filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (16)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (16)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (16)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (16)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (16)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (16)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (12)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (12)
  • M Stainless Steel (12)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (12)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (12)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (12)
  • K Cast Iron (18)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (18)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (18)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (18)
  • N Non-Ferrous Materials (14)
    • N1
      Wrought Aluminum (14)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (14)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (14)
  • S High-Temp Alloys (12)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (3)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (3)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (3)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (12)
  • H Hardened Materials (9)
    • H1
      Hardened Materials 44-48 HRC (9)
    • H2
      Hardened Materials 48-55 HRC (9)
    • H3
      Hardened Materials 56-60 HRC (9)
Applications
Applications
  • Chamfer Milling Chamfer Milling (9)
  • Countersinking Countersinking (9)
Cutting Diameter
Cutting Diameter
  • 0.63 in (2)
  • 0.984 in (2)
  • 1.26 in (2)
  • 1.575 in (1)
  • 1.969 in (1)
  • 2.48 in (1)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 16.0 mm (2)
  • 25.0 mm (2)
  • 32.0 mm (2)
  • 40.0 mm (1)
  • 50.0 mm (1)
  • 63.0 mm (1)
Cutting Diameter Min komu Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 28.8 mm (2)
  • 37.801 mm (2)
  • 44.801 mm (2)
  • 52.301 mm (1)
  • 66.7 mm (1)
  • 79.7 mm (1)
Maximum Cutting Diameter Min komu Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 1.135 in (2)
  • 1.488 in (2)
  • 1.764 in (2)
  • 2.059 in (1)
  • 2.626 in (1)
  • 3.138 in (1)
Maximum Cutting Diameter Min komu Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 6.101 mm (1)
  • 6.4 mm (6)
  • 8.3 mm (2)
Cutting Length Min komu Cutting Length Max
Cutting Length
Cutting Length
  • 0.24 in (1)
  • 0.252 in (6)
  • 0.327 in (2)
Cutting Length Min komu Cutting Length Max
Reach
Reach
  • 0.846 in (6)
  • 1.575 in (3)
Reach Min komu Reach Max
Reach
Reach
  • 21.5 mm (6)
  • 40.0 mm (3)
Reach Min komu Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (9)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (3)
  • Straight-Cylindrical (3)
  • Weldon With Thread (3)
Number of Flutes
Number of Flutes
  • 2 (4)
  • 3 (2)
  • 4 (2)
  • 5 (1)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.575 in (3)
  • 2.953 in (1)
  • 3.781 in (1)
  • 3.938 in (1)
  • 7.875 in (3)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (3)
  • 75.0 mm (1)
  • 96.0 mm (1)
  • 100.0 mm (1)
  • 200.0 mm (3)
Over All Length [L] Min komu Over All Length [L] Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • HK15M (9)
  • THM (13)
  • THR (3)
  • TN2510 (9)
  • TN450 (9)
  • TN5515 (9)
  • TN7525 (9)
  • TN7535 (9)
  • TTM08 (13)
  • TTR (10)
  • WK15CM (4)
  • WP35CM (9)
Hand Of Tool
Hand Of Tool
  • R (9)
Wiper Insert
Wiper Insert
  • N (14)
frontEnd
Neck Diameter
Neck Diameter
  • 0.61 in (2)
  • 0.965 in (2)
  • 1.24 in (2)
Neck Diameter Min komu Neck Diameter Max
Neck Diameter
Neck Diameter
  • 15.5 mm (2)
  • 24.5 mm (2)
  • 31.5 mm (2)
Neck Diameter Min komu Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • S-SQUARE 90 (14)
Insert IC Size
Insert IC Size
  • 9.525 mm (7)
  • 12.701 mm (7)
Insert IC Size Min komu Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.375 in (7)
  • 0.5 in (7)
Insert IC Size Min komu Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 9.525 mm (7)
  • 12.701 mm (7)
Cutting Edge Length Min komu Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.375 in (7)
  • 0.5 in (7)
Cutting Edge Length Min komu Cutting Edge Length Max
Cutting Tool Material
Cutting Tool Material
  • H W (14)
Tolerance Class
Tolerance Class
  • M (8)
  • N (6)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (6)
  • SHELL MILL (3)
Back-End Diameter
Back-End Diameter
  • 16.0 mm (2)
  • 22.0 mm (3)
  • 25.0 mm (2)
  • 32.0 mm (2)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.63 in (2)
  • 0.866 in (3)
  • 0.984 in (2)
  • 1.26 in (2)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?