Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

    Řada M680

    Vybrat filtry
    Filtry
    Filtry
      Zobrazit filtry v
      Metrické
      Palcové
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (81)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(74)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(81)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(81)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(81)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(81)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(78)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(78)
      • M Stainless Steel (86)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(86)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(86)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(86)
      • K Cast Iron (107)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(107)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(104)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(104)
      • N Non-Ferrous Materials (55)
        • N1
          Wrought Aluminum (55)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(55)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(55)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (25)
        • N5
          Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (25)
        • N6
          Carbon, Graphite Composites, CFRP (25)
        • N7
          MMC's (25)
      • S High-Temp Alloys (79)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(64)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(64)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(64)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(79)
      • H Hardened Materials (35)
        • H1
          Hardened Materials 44-48 HRC(35)
      Select All Star
      • CN (31)
      • DE (56)
      • GB (8)
      • IN (29)
      • SG (10)
      Applications
      Applications
      • Face MillingFace Milling (31)
      • PocketPocket (8)
      • Pocket MillingPocket Milling (8)
      • Pocket Plunge MillingPocket Plunge Milling (8)
      • RampingRamping (8)
      • Shoulder MillingShoulder Milling (31)
      • Shoulder RoughingShoulder Roughing (8)
      • Shoulder Square EndShoulder Square End (21)
      • Slot MillingSlot Milling (31)
      • Slot SideSlot Side (8)
      • Slot Square EndSlot Square End (29)
      Cutting Diameter
      Cutting Diameter
      • 0.625 in(1)
      • 0.63 in(2)
      • 0.75 in(1)
      • 0.787 in(2)
      • 0.984 in(4)
      • 1.0 in(2)
      • 1.25 in(1)
      • 1.26 in(5)
      • 1.379 in(1)
      • 1.575 in(4)
      • 1.969 in(2)
      • 2.0 in(1)
      • 2.48 in(1)
      • 3.15 in(1)
      • 3.938 in(1)
      • 4.921 in(1)
      • 6.299 in(1)
      Cutting Diameter MinkomuCutting Diameter Max
      Cutting Diameter
      Cutting Diameter
      • 15.875 mm(1)
      • 16.0 mm(2)
      • 19.05 mm(1)
      • 20.0 mm(2)
      • 25.0 mm(4)
      • 25.401 mm(2)
      • 31.75 mm(1)
      • 32.0 mm(5)
      • 35.0 mm(1)
      • 40.0 mm(4)
      • 50.0 mm(2)
      • 50.801 mm(1)
      • 63.0 mm(1)
      • 80.0 mm(1)
      • 100.0 mm(1)
      • 125.0 mm(1)
      • 160.0 mm(1)
      Cutting Diameter MinkomuCutting Diameter Max
      Cutting Length
      Cutting Length
      • 9.0 mm(10)
      • 9.5 mm(4)
      • 13.976 mm(3)
      • 14.0 mm(12)
      • 15.3 mm(1)
      • 15.351 mm(1)
      Cutting Length MinkomuCutting Length Max
      Cutting Length
      Cutting Length
      • 0.354 in(10)
      • 0.374 in(4)
      • 0.55 in(3)
      • 0.551 in(12)
      • 0.602 in(1)
      • 0.604 in(1)
      Cutting Length MinkomuCutting Length Max
      Reach
      Reach
      • 1.063 in(1)
      • 1.071 in(1)
      • 1.181 in(2)
      • 1.186 in(1)
      • 1.26 in(1)
      • 1.286 in(1)
      • 1.5 in(1)
      • 1.536 in(2)
      • 1.566 in(1)
      • 1.567 in(1)
      • 1.575 in(10)
      • 1.72 in(1)
      • 1.772 in(1)
      • 1.969 in(3)
      • 2.025 in(1)
      • 2.45 in(1)
      • 2.48 in(2)
      Reach MinkomuReach Max
      Reach
      Reach
      • 27.0 mm(1)
      • 27.201 mm(1)
      • 30.0 mm(2)
      • 30.125 mm(1)
      • 32.0 mm(1)
      • 32.676 mm(1)
      • 38.1 mm(1)
      • 39.0 mm(2)
      • 39.776 mm(1)
      • 39.801 mm(1)
      • 40.0 mm(10)
      • 43.7 mm(1)
      • 45.0 mm(1)
      • 50.0 mm(3)
      • 51.426 mm(1)
      • 62.225 mm(1)
      • 63.0 mm(2)
      Reach MinkomuReach Max
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 90.0 (23)
      • 90.25 (2)
      • 90.28 (2)
      • 90.4 (4)
      Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • A-Socket Head Cap Screw (6)
      • B-Cutter Retention Screw (3)
      • SHCS or RetScrw Or BoltCircle (1)
      • Screw-On Connection (6)
      • Straight-Cylindrical (8)
      • Weldon (7)
      Number of Flutes
      Number of Flutes
      • 12 (1)
      • 2 (9)
      • 3 (6)
      • 4 (6)
      • 5 (5)
      • 6 (2)
      • 8 (1)
      • 9 (1)
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 1.5 in(1)
      • 1.575 in(4)
      • 1.772 in(1)
      • 1.969 in(2)
      • 2.047 in(2)
      • 2.48 in(6)
      • 2.953 in(1)
      • 3.228 in(1)
      • 3.781 in(1)
      • 3.938 in(2)
      • 4.0 in(1)
      • 4.331 in(1)
      • 6.0 in(1)
      • 7.087 in(1)
      • 7.875 in(1)
      • 8.0 in(2)
      • 8.661 in(1)
      • 9.8 in(1)
      • 9.843 in(1)
      Over All Length [L] MinkomuOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 38.1 mm(1)
      • 40.0 mm(4)
      • 45.0 mm(1)
      • 50.0 mm(2)
      • 52.0 mm(2)
      • 63.0 mm(6)
      • 75.0 mm(1)
      • 82.0 mm(1)
      • 96.0 mm(1)
      • 100.0 mm(2)
      • 101.601 mm(1)
      • 110.0 mm(1)
      • 152.4 mm(1)
      • 180.0 mm(1)
      • 200.0 mm(1)
      • 203.201 mm(2)
      • 220.0 mm(1)
      • 248.925 mm(1)
      • 250.0 mm(1)
      Over All Length [L] MinkomuOver All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.016 in(30)
      • 0.031 in(65)
      • 0.047 in(57)
      • 0.063 in(33)
      • 0.066 in(17)
      • 0.079 in(32)
      • 0.098 in(21)
      • 0.125 in(20)
      • 0.157 in(21)
      Corner Radius MinkomuCorner Radius Max
      Corner Radius
      Corner Radius
      • 0.4 mm(30)
      • 0.8 mm(65)
      • 1.201 mm(57)
      • 1.6 mm(33)
      • 1.675 mm(17)
      • 2.0 mm(32)
      • 2.5 mm(21)
      • 3.176 mm(20)
      • 4.0 mm(21)
      Corner Radius MinkomuCorner Radius Max
      application
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • THM (42)
      • THM-U (20)
      • THR (28)
      • TN2510 (27)
      • TN25M (27)
      • TN450 (31)
      • TN5515 (31)
      • TN6501 (22)
      • TN6502 (22)
      • TN6510 (24)
      • TN6520 (25)
      • TN6525 (26)
      • TN6540 (30)
      • TN7525 (31)
      • TN7535 (31)
      • TTI25 (34)
      • TTM (4)
      • TTM08 (30)
      • TTR (17)
      • WK15CM (45)
      • WK15PM (11)
      • WP35CM (46)
      • WP40PM (24)
      • WS30PM (18)
      • WU20PM (34)
      Hand Of Tool
      Hand Of Tool
      • R (31)
      Rough Finish
      Rough Finish
      • FR (5)
      Wiper Insert
      Wiper Insert
      • N (89)
      frontEnd
      Insert Shape
      Insert Shape
      • A-PARALLELOGRAM 85 (13)
      • X-PARALLELOGRAM 80 (102)
      • X-RECTANGLE MILL 4 90 (18)
      • X-RH0MBIC 70 (14)
      Center Cutting
      Center Cutting
      insertGeometry
      Shape
      Shape
      • A-PARALLELOGRAM 85 (9)
      • X-PARALLELOGRAM 80 (75)
      • X-RECTANGLE MILL 4 90 (1)
      • X-RH0MBIC 70 (4)
      Insert IC Size
      Insert IC Size
      • 9.525 mm(5)
      Insert IC Size MinkomuInsert IC Size Max
      Insert IC Size
      Insert IC Size
      • 0.375 in(5)
      Insert IC Size MinkomuInsert IC Size Max
      Cutting Edge Length
      Cutting Edge Length
      • 8.875 mm(1)
      • 8.951 mm(1)
      • 9.0 mm(1)
      • 9.175 mm(1)
      • 9.451 mm(1)
      • 9.475 mm(5)
      • 9.875 mm(2)
      • 10.375 mm(4)
      • 10.451 mm(5)
      • 15.675 mm(58)
      • 15.775 mm(3)
      • 15.875 mm(5)
      Cutting Edge Length MinkomuCutting Edge Length Max
      Cutting Edge Length
      Cutting Edge Length
      • 0.35 in(1)
      • 0.352 in(1)
      • 0.354 in(1)
      • 0.361 in(1)
      • 0.372 in(1)
      • 0.373 in(5)
      • 0.389 in(2)
      • 0.409 in(4)
      • 0.412 in(5)
      • 0.617 in(58)
      • 0.621 in(3)
      • 0.625 in(5)
      Cutting Edge Length MinkomuCutting Edge Length Max
      Chip Breaker CBMD
      Chip Breaker CBMD
      • AL (9)
      • ALP (4)
      • GE (11)
      • MH (3)
      • ML (4)
      • MM (4)
      • MR (3)
      Cutting Tool Material
      Cutting Tool Material
      • H T (3)
      • H W (86)
      Tolerance Class
      Tolerance Class
      • H (73)
      • M (2)
      • N (14)
      backEnd
      Connection Type
      Connection Type
      • CYLINDRICAL (15)
      • SCREW-ON (6)
      • SHELL MILL (10)
      Back-End Diameter
      Back-End Diameter
      • 15.875 mm(1)
      • 16.0 mm(2)
      • 19.05 mm(2)
      • 20.0 mm(2)
      • 22.0 mm(5)
      • 24.375 mm(1)
      • 25.0 mm(3)
      • 25.401 mm(2)
      • 27.0 mm(1)
      • 28.0 mm(3)
      • 31.75 mm(1)
      • 32.0 mm(6)
      • 40.0 mm(2)
      Back-End Diameter MinkomuBack-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.625 in(1)
      • 0.63 in(2)
      • 0.75 in(2)
      • 0.787 in(2)
      • 0.866 in(5)
      • 0.96 in(1)
      • 0.984 in(3)
      • 1.0 in(2)
      • 1.063 in(1)
      • 1.102 in(3)
      • 1.25 in(1)
      • 1.26 in(6)
      • 1.575 in(2)
      Back-End Diameter MinkomuBack-End Diameter Max
      No filters matching ""

      M680

      (107)M680

      M680+

      (13)M680+
      Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
      product-image
      Please adjust the following properties from

      Katalogové číslo ISO

      Katalogové číslo ANSI

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

       

      Can’t find the file type you’re looking for?

      Abyste viděli informace ve svém panelu, musíte být přihlášeni.
      Session expired due to inactivity, please login again
      Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
      položek bylo úspěšně přidáno do košíku
      Zobrazit košík

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material NumberKatalogové číslo ISOKarbid  

      You are about to leave the Solution building process.

      Are you sure you want to leave?