Platforma M640 je první volbou při požadavku na nízké řezné síly

Platforma M640 je první volbou, pokud je prioritou vysoká produktivita, vynikající kvalita povrchu a jemný řezný výkon. Tento snadno použitelný nástroj se šesti řeznými hranami a zjednodušenou konstrukcí tělesa je ideální i pro stroje s nízkým výkonem.

  • Vysoce pozitivní úhel čela zajišťuje extrémně nízké řezné síly.
  • Snadné použití pro rychlé a přesné indexování.
  • Nástroj s vnitřním chlazením.
Vybrat filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (28)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(24)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(28)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(28)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(28)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(28)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(28)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(28)
    • M Stainless Steel (28)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(28)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(28)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(28)
    • K Cast Iron (27)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(27)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(26)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(26)
    • N Non-Ferrous Materials (15)
      • N1
        Wrought Aluminum (15)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(15)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(15)
    • S High-Temp Alloys (24)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(24)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(24)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(24)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(24)
    • H Hardened Materials (14)
      • H1
        Hardened Materials 44-48 HRC(14)
    Select All Star
    • CN (12)
    • DE (18)
    • GB (1)
    • SG (2)
    • US (2)
    Applications
    Applications
    • Face MillingFace Milling (9)
    Cutting Diameter
    Cutting Diameter
    • 1.26 in(1)
    • 1.969 in(1)
    • 2.0 in(1)
    • 2.48 in(1)
    • 3.0 in(1)
    • 3.15 in(1)
    • 3.938 in(2)
    • 4.921 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 32.0 mm(1)
    • 50.0 mm(1)
    • 50.801 mm(1)
    • 63.0 mm(1)
    • 76.2 mm(1)
    • 80.0 mm(1)
    • 100.0 mm(2)
    • 125.0 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 38.401 mm(1)
    • 56.401 mm(1)
    • 57.151 mm(1)
    • 69.4 mm(1)
    • 82.575 mm(1)
    • 86.4 mm(1)
    • 106.4 mm(2)
    • 131.4 mm(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 1.512 in(1)
    • 2.221 in(1)
    • 2.25 in(1)
    • 2.732 in(1)
    • 3.251 in(1)
    • 3.402 in(1)
    • 4.189 in(2)
    • 5.173 in(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 4.801 mm(7)
    • 4.875 mm(2)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.189 in(7)
    • 0.192 in(2)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.5 in(1)
    • 1.575 in(3)
    • 1.969 in(3)
    • 2.0 in(1)
    • 2.48 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 38.1 mm(1)
    • 40.0 mm(3)
    • 50.0 mm(3)
    • 50.801 mm(1)
    • 63.0 mm(1)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 58.0 (9)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (4)
    • B-Cutter Retention Screw (4)
    • Weldon (1)
    Number of Flutes
    Number of Flutes
    • 10 (1)
    • 4 (2)
    • 5 (2)
    • 6 (1)
    • 7 (2)
    • 8 (1)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 3.0 (15)
    • 6.0 (30)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.5 in(1)
    • 1.575 in(2)
    • 1.969 in(3)
    • 2.0 in(1)
    • 2.48 in(1)
    • 3.938 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 38.1 mm(1)
    • 40.0 mm(2)
    • 50.0 mm(3)
    • 50.801 mm(1)
    • 63.0 mm(1)
    • 100.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.035 in(11)
    • 0.038 in(34)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.9 mm(11)
    • 0.976 mm(34)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM (10)
    • THM-U (10)
    • TN2510 (9)
    • TN5515 (9)
    • TN6501 (9)
    • TN6502 (9)
    • TN6510 (11)
    • TN6520 (11)
    • TN6525 (13)
    • TN6540 (11)
    • TN7525 (9)
    • TN7535 (9)
    • WK15CM (11)
    • WP25PM (13)
    • WP35CM (9)
    • WP40PM (13)
    • WS30PM (10)
    • WS40PM (13)
    Hand Of Tool
    Hand Of Tool
    • R (9)
    Wiper Insert
    Wiper Insert
    • N (20)
    • Y (7)
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.976 in(1)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 24.8 mm(1)
    Neck Diameter MinkomuNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • H-HEXAGON 120 (27)
    Insert IC Size
    Insert IC Size
    • 10.9 mm(5)
    • 10.976 mm(14)
    • 11.0 mm(2)
    • 11.15 mm(6)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.429 in(5)
    • 0.432 in(14)
    • 0.433 in(2)
    • 0.439 in(6)
    Insert IC Size MinkomuInsert IC Size Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GD (20)
    • LD (7)
    Cutting Tool Material
    Cutting Tool Material
    • H W (27)
    Tolerance Class
    Tolerance Class
    • G (21)
    • P (6)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (1)
    • SHELL MILL (8)
    Back-End Diameter
    Back-End Diameter
    • 19.05 mm(1)
    • 22.0 mm(2)
    • 25.401 mm(1)
    • 27.0 mm(1)
    • 32.0 mm(3)
    • 40.0 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.75 in(1)
    • 0.866 in(2)
    • 1.0 in(1)
    • 1.063 in(1)
    • 1.26 in(3)
    • 1.575 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?