Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Máte otázku týkající se produktu?

Zobrazit úplný seznam globálních servisních odborníků podle specializace.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík

M16 Series

Vybrat filtry
Filters
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (15)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (15)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (15)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (15)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (15)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (15)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (12)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (12)
  • M Stainless Steel (12)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (12)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (12)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (12)
  • K Cast Iron (14)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (14)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (14)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (14)
  • N Non-Ferrous Materials (4)
    • N1
      Wrought Aluminum (4)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (4)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (4)
  • S High-Temp Alloys (12)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (8)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (8)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (8)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (12)
Applications
Applications
  • Slot Milling Slot Milling (4)
  • Slot Side Slot Side (4)
  • Slot T Slot T (4)
Cutting Diameter
Cutting Diameter
  • 0.98 in (1)
  • 1.256 in (1)
  • 1.57 in (1)
  • 1.964 in (1)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 24.901 mm (1)
  • 31.875 mm (1)
  • 39.875 mm (1)
  • 49.875 mm (1)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Length
Cutting Length
  • 10.951 mm (1)
  • 13.851 mm (1)
  • 17.85 mm (1)
  • 21.85 mm (1)
Cutting Length Min komu Cutting Length Max
Cutting Length
Cutting Length
  • 0.431 in (1)
  • 0.545 in (1)
  • 0.704 in (1)
  • 0.86 in (1)
Cutting Length Min komu Cutting Length Max
Reach
Reach
  • 1.26 in (1)
  • 1.655 in (1)
  • 1.929 in (1)
  • 2.362 in (1)
Reach Min komu Reach Max
Reach
Reach
  • 32.0 mm (1)
  • 42.0 mm (1)
  • 49.0 mm (1)
  • 60.0 mm (1)
Reach Min komu Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (4)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Weldon (4)
Number of Flutes
Number of Flutes
  • 2 (4)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 3.15 in (1)
  • 3.543 in (1)
  • 4.134 in (1)
  • 4.724 in (1)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 80.0 mm (1)
  • 90.0 mm (1)
  • 105.0 mm (1)
  • 120.0 mm (1)
Over All Length [L] Min komu Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.016 in (5)
  • 0.031 in (16)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (5)
  • 0.8 mm (16)
Corner Radius Min komu Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (4)
  • TN7535 (4)
  • TTM08 (7)
  • TTR (4)
  • WK15CM (8)
  • WP35CM (8)
  • WP40PM (8)
Hand Of Tool
Hand Of Tool
  • R (4)
Wiper Insert
Wiper Insert
  • N (17)
frontEnd
Cutting Width
Cutting Width
  • 0.431 in (1)
  • 0.545 in (1)
  • 0.704 in (1)
  • 0.86 in (1)
Cutting Width Min komu Cutting Width Max
Cutting Width
Cutting Width
  • 10.951 mm (1)
  • 13.851 mm (1)
  • 17.85 mm (1)
  • 21.85 mm (1)
Cutting Width Min komu Cutting Width Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.243 in (1)
  • 0.332 in (1)
  • 0.412 in (1)
  • 0.488 in (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 6.176 mm (1)
  • 8.425 mm (1)
  • 10.451 mm (1)
  • 12.4 mm (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Neck Diameter
Neck Diameter
  • 0.494 in (1)
  • 0.591 in (1)
  • 0.748 in (1)
  • 0.987 in (1)
Neck Diameter Min komu Neck Diameter Max
Neck Diameter
Neck Diameter
  • 12.55 mm (1)
  • 15.0 mm (1)
  • 19.0 mm (1)
  • 25.076 mm (1)
Neck Diameter Min komu Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • C-DIAMOND/RHOMBIC 80 (17)
Insert IC Size
Insert IC Size
  • 6.351 mm (4)
  • 7.95 mm (5)
  • 9.525 mm (4)
  • 12.701 mm (4)
Insert IC Size Min komu Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.25 in (4)
  • 0.313 in (5)
  • 0.375 in (4)
  • 0.5 in (4)
Insert IC Size Min komu Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 6.45 mm (4)
  • 8.05 mm (5)
  • 9.675 mm (4)
  • 12.9 mm (4)
Cutting Edge Length Min komu Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.254 in (4)
  • 0.317 in (5)
  • 0.381 in (4)
  • 0.508 in (4)
Cutting Edge Length Min komu Cutting Edge Length Max
Cutting Tool Material
Cutting Tool Material
  • H W (17)
Tolerance Class
Tolerance Class
  • N (17)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (4)
Back-End Diameter
Back-End Diameter
  • 16.0 mm (2)
  • 25.0 mm (1)
  • 32.0 mm (1)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.63 in (2)
  • 0.984 in (1)
  • 1.26 in (1)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""

Těla nástrojů

(4) Těla nástrojů

Břitové destičky

(17) Břitové destičky
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

I have read and accepted the Terms & Conditions of use

 

Can’t find the file type you’re looking for?

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku
Zobrazit košík
DOWNLOAD TYPE:



. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?