Řada VSM17

Vybrat filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (118)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (101)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (118)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (118)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (118)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (118)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (118)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (118)
  • M Stainless Steel (118)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (118)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (118)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (118)
  • K Cast Iron (94)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (94)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (91)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (91)
  • N Non-Ferrous Materials (90)
    • N1
      Wrought Aluminum (90)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (90)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (87)
  • S High-Temp Alloys (118)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (109)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (109)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (109)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (118)
  • H Hardened Materials (76)
    • H1
      Hardened Materials 44-48 HRC (76)
Select All Star
  • CN (56)
  • DE (87)
  • GB (4)
  • IN (5)
  • SG (29)
  • US (44)
Applications
Applications
  • Face Milling Face Milling (59)
  • Pocket Pocket (59)
  • Pocket Helical Pocket Helical (59)
  • Pocket Milling Pocket Milling (59)
  • Profile Milling Profile Milling (59)
  • Ramping Ramping (59)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (59)
  • Shoulder Milling Shoulder Milling (59)
  • Shoulder Roughing Shoulder Roughing (59)
  • Shoulder Square End Shoulder Square End (59)
  • Slot Milling Slot Milling (2)
  • Slot Side Slot Side (2)
  • Slot Square End Slot Square End (2)
Cutting Diameter
Cutting Diameter
  • 0.984 in (4)
  • 1.0 in (4)
  • 1.248 in (6)
  • 1.26 in (6)
  • 1.5 in (9)
  • 1.575 in (8)
  • 1.969 in (3)
  • 2.0 in (5)
  • 2.48 in (2)
  • 2.5 in (2)
  • 3.0 in (2)
  • 3.15 in (2)
  • 3.938 in (1)
  • 4.0 in (1)
  • 4.921 in (1)
  • 5.0 in (1)
  • 6.0 in (1)
  • 6.299 in (1)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 25.0 mm (4)
  • 25.401 mm (4)
  • 31.701 mm (6)
  • 32.0 mm (6)
  • 38.1 mm (9)
  • 40.0 mm (8)
  • 50.0 mm (3)
  • 50.801 mm (5)
  • 63.0 mm (2)
  • 63.5 mm (2)
  • 76.2 mm (2)
  • 80.0 mm (2)
  • 100.0 mm (1)
  • 101.601 mm (1)
  • 125.0 mm (1)
  • 127.0 mm (1)
  • 152.4 mm (1)
  • 160.0 mm (1)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Length
Cutting Length
  • 15.601 mm (1)
  • 15.701 mm (2)
  • 15.8 mm (3)
  • 15.9 mm (4)
  • 16.0 mm (4)
  • 16.1 mm (6)
  • 16.2 mm (17)
  • 16.3 mm (16)
  • 16.401 mm (4)
  • 60.401 mm (1)
  • 104.601 mm (1)
Cutting Length Min komu Cutting Length Max
Cutting Length
Cutting Length
  • 0.614 in (1)
  • 0.618 in (2)
  • 0.622 in (3)
  • 0.626 in (4)
  • 0.63 in (4)
  • 0.634 in (6)
  • 0.638 in (17)
  • 0.642 in (16)
  • 0.646 in (4)
  • 2.378 in (1)
  • 4.118 in (1)
Cutting Length Min komu Cutting Length Max
Reach
Reach
  • 1.22 in (1)
  • 1.248 in (1)
  • 1.299 in (1)
  • 1.379 in (1)
  • 1.5 in (4)
  • 1.536 in (2)
  • 1.575 in (15)
  • 1.72 in (2)
  • 1.732 in (2)
  • 1.748 in (2)
  • 1.752 in (2)
  • 1.81 in (2)
  • 1.969 in (11)
  • 2.0 in (9)
  • 2.48 in (2)
  • 3.5 in (1)
  • 5.5 in (1)
Reach Min komu Reach Max
Reach
Reach
  • 31.0 mm (1)
  • 31.701 mm (1)
  • 33.0 mm (1)
  • 35.0 mm (1)
  • 38.1 mm (4)
  • 39.0 mm (2)
  • 40.0 mm (15)
  • 43.7 mm (2)
  • 44.0 mm (2)
  • 44.401 mm (2)
  • 44.5 mm (2)
  • 45.975 mm (2)
  • 50.0 mm (11)
  • 50.801 mm (9)
  • 63.0 mm (2)
  • 88.9 mm (1)
  • 139.701 mm (1)
Reach Min komu Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (59)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (23)
  • SHCS or RetScrw Or BoltCircle (1)
  • Screw-On Connection (9)
  • Straight-Cylindrical (18)
  • Weldon (8)
Number of Flutes
Number of Flutes
  • 12 (2)
  • 2 (12)
  • 3 (15)
  • 4 (14)
  • 5 (4)
  • 6 (6)
  • 7 (2)
  • 8 (2)
  • 9 (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (61)
  • 2.0 (134)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.575 in (12)
  • 1.752 in (2)
  • 1.969 in (3)
  • 2.0 in (3)
  • 2.114 in (1)
  • 2.244 in (1)
  • 2.465 in (4)
  • 2.48 in (2)
  • 2.539 in (3)
  • 3.5 in (2)
  • 3.543 in (1)
  • 3.938 in (1)
  • 4.0 in (2)
  • 4.331 in (2)
  • 4.5 in (3)
  • 4.724 in (2)
  • 4.799 in (1)
  • 5.118 in (2)
  • 5.202 in (2)
  • 5.5 in (1)
  • 6.694 in (1)
  • 6.702 in (1)
  • 8.0 in (1)
  • 8.268 in (2)
  • 9.799 in (2)
  • 9.843 in (2)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (12)
  • 44.5 mm (2)
  • 50.0 mm (3)
  • 50.801 mm (3)
  • 53.7 mm (1)
  • 57.0 mm (1)
  • 62.6 mm (4)
  • 63.0 mm (2)
  • 64.5 mm (3)
  • 88.9 mm (2)
  • 90.0 mm (1)
  • 100.0 mm (1)
  • 101.601 mm (2)
  • 110.0 mm (2)
  • 114.301 mm (3)
  • 120.0 mm (2)
  • 121.9 mm (1)
  • 130.0 mm (2)
  • 132.1 mm (2)
  • 139.701 mm (1)
  • 170.0 mm (1)
  • 170.201 mm (1)
  • 203.201 mm (1)
  • 210.0 mm (2)
  • 248.9 mm (2)
  • 250.0 mm (2)
Over All Length [L] Min komu Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.016 in (64)
  • 0.031 in (78)
  • 0.047 in (75)
  • 0.063 in (67)
  • 0.079 in (66)
  • 0.095 in (65)
  • 0.126 in (66)
  • 0.157 in (65)
  • 0.237 in (62)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (64)
  • 0.8 mm (78)
  • 1.201 mm (75)
  • 1.6 mm (67)
  • 2.0 mm (66)
  • 2.401 mm (65)
  • 3.2 mm (66)
  • 4.0 mm (65)
  • 6.0 mm (62)
Corner Radius Min komu Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WK15CM (64)
  • WK15PM (60)
  • WN10HM (62)
  • WN25PM (68)
  • WP25PM (74)
  • WP35CM (68)
  • WP40PM (72)
  • WS40PM (76)
  • WU20PM (61)
  • WU35PM (62)
Hand Of Tool
Hand Of Tool
  • R (59)
Wiper Insert
Wiper Insert
  • N (77)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.7 (2)
  • 0.9 (2)
  • 1.2 (2)
  • 1.6 (2)
  • 1.7 (2)
  • 2.1 (4)
  • 3.0 (8)
  • 4.0 (8)
  • 4.3 (9)
  • 5.7 (6)
  • 5.8 (6)
  • 8.5 (4)
  • 8.8 (4)
Maximum Ramp Angle Min komu Maximum Ramp Angle Max
frontEnd
Neck Diameter
Neck Diameter
  • 0.828 in (3)
  • 0.843 in (3)
  • 1.093 in (4)
  • 1.102 in (5)
  • 1.343 in (6)
  • 1.417 in (5)
Neck Diameter Min komu Neck Diameter Max
Neck Diameter
Neck Diameter
  • 21.0 mm (3)
  • 21.401 mm (3)
  • 27.75 mm (4)
  • 28.0 mm (5)
  • 34.1 mm (6)
  • 36.0 mm (5)
Neck Diameter Min komu Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • X-PARALLELOGRAM 75 (77)
Cutting Edge Length
Cutting Edge Length
  • 15.65 mm (3)
  • 16.3 mm (6)
  • 16.55 mm (7)
  • 16.7 mm (51)
  • 16.725 mm (10)
Cutting Edge Length Min komu Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.616 in (3)
  • 0.642 in (6)
  • 0.652 in (7)
  • 0.657 in (51)
  • 0.658 in (10)
Cutting Edge Length Min komu Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • ALP (12)
  • MH (8)
  • ML (21)
  • MM (34)
  • MU (2)
Cutting Tool Material
Cutting Tool Material
  • H W (77)
Tolerance Class
Tolerance Class
  • C (33)
  • E (1)
  • P (43)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (26)
  • SCREW-ON (9)
  • SHELL MILL (24)
Back-End Diameter
Back-End Diameter
  • 16.0 mm (1)
  • 19.1 mm (6)
  • 21.0 mm (2)
  • 22.0 mm (5)
  • 25.0 mm (3)
  • 25.401 mm (7)
  • 27.0 mm (2)
  • 29.0 mm (7)
  • 31.701 mm (3)
  • 31.75 mm (1)
  • 32.0 mm (10)
  • 38.1 mm (9)
  • 40.0 mm (3)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.63 in (1)
  • 0.752 in (6)
  • 0.828 in (2)
  • 0.866 in (5)
  • 0.984 in (3)
  • 1.0 in (7)
  • 1.063 in (2)
  • 1.143 in (7)
  • 1.248 in (3)
  • 1.25 in (1)
  • 1.26 in (10)
  • 1.5 in (9)
  • 1.575 in (3)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?