successfully added to cart
View Cart
Obráběcí jednotky • D-upínání
Obráběcí jednotky • D-upínání
Obráběcí jednotky • D-upínání
Obráběcí jednotky • D-upínání

DDJN 93°

Obráběcí jednotky • D-upínání

Uses and application

  • Shank - PSCShank - PSC
  • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
  • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (6)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (6)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (6)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (6)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (6)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (6)
  • M Stainless Steel (6)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (6)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (6)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (6)
  • K Cast Iron (6)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (6)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (6)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (6)
  • N Non-Ferrous Materials (6)
    • N1
      Wrought Aluminum
      (6)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (6)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (6)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (6)
    • N6
      Carbon, Graphite Composites, CFRP
      (4)
    • N7
      MMC's
      (6)
  • S High-Temp Alloys (6)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (6)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (6)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (6)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (6)
  • H Hardened Materials (4)
    • H1
      Hardened Materials 44-48 HRC
      (4)
    • H2
      Hardened Materials 48-55 HRC
      (4)
    • H3
      Hardened Materials 56-60 HRC
      (4)
    • H4
      Hardened Materials >60 HRC
      (4)
Applications
Applications
  • Facing Facing (6)
  • ID Facing ID Facing (6)
  • Multiple Direction Cutting Multiple Direction Cutting (6)
  • TRN Boring TRN Boring (6)
  • Turning Turning (6)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (6)
  • Interrupted (4)
  • Lightly Interrupted Cut (6)
  • Smooth Cut (6)
  • Varying Depth of Cut (6)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (4)
  • 2.0 (6)
  • 4.0 (6)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.1 mm (4)
  • 0.102 mm (4)
  • 0.2 mm (4)
  • 0.203 mm (2)
  • 0.34 mm (2)
  • 0.397 mm (6)
  • 0.4 mm (6)
  • 0.406 mm (4)
  • 0.792 mm (2)
  • 0.794 mm (6)
  • 0.8 mm (6)
  • 1.191 mm (6)
  • 1.2 mm (6)
  • 1.588 mm (2)
  • 1.6 mm (4)
  • 2.381 mm (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.004 in (6)
  • 0.008 in (4)
  • 0.013 in (2)
  • 0.0156 in (6)
  • 0.016 in (6)
  • 0.031 in (6)
  • 0.0312 in (6)
  • 0.0313 in (6)
  • 0.0469 in (6)
  • 0.047 in (4)
  • 0.0625 in (4)
  • 0.063 in (2)
  • 0.0938 in (2)
  • 0.312 in (2)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (4)
  • CL4 (2)
  • CM2 (4)
  • CM3 (2)
  • CPX (4)
  • CW2 (2)
  • CW2015 (4)
  • CW5025 (4)
  • HK1500 (2)
  • HT2 (4)
  • K060 (2)
  • K090 (4)
  • K10M (4)
  • K10P (4)
  • K10U (4)
  • K15U (4)
  • K20K (4)
  • K25M (6)
  • K25P (4)
  • K313 (6)
  • K35P (4)
  • K420 (2)
  • K45 (2)
  • K68 (4)
  • KB1340 (2)
  • KB1345 (2)
  • KB1610 (2)
  • KB1625 (2)
  • KB1630 (2)
  • KB5610 (2)
  • KB5625 (2)
  • KB5630 (2)
  • KB9610 (4)
  • KB9640 (2)
  • KBH10 (4)
  • KBH10B (4)
  • KBH20 (4)
  • KBH20B (4)
  • KC210 (4)
  • KC250 (2)
  • KC5010 (6)
  • KC5025 (6)
  • KC5410 (4)
  • KC5510 (6)
  • KC5525 (6)
  • KC720 (2)
  • KC730 (4)
  • KC7310 (6)
  • KC732 (2)
  • KC8050 (6)
  • KC810 (6)
  • KC850 (6)
  • KC9010 (6)
  • KC9025 (6)
  • KC910 (4)
  • KC9105 (6)
  • KC9110 (6)
  • KC9120 (6)
  • KC9125 (6)
  • KC9140 (6)
  • KC9145 (4)
  • KC9210 (2)
  • KC9215 (6)
  • KC9225 (6)
  • KC9240 (6)
  • KC9240NEW (6)
  • KC9245 (6)
  • KC9315 (6)
  • KC9320 (6)
  • KC9325 (6)
  • KC935 (6)
  • KC950 (4)
  • KC990 (6)
  • KCD25 (2)
  • KCK05 (6)
  • KCK05B (6)
  • KCK15 (6)
  • KCK15B (6)
  • KCK20 (6)
  • KCK20B (6)
  • KCM15 (6)
  • KCM15B (6)
  • KCM25 (6)
  • KCM25B (6)
  • KCM35 (4)
  • KCM35B (2)
  • KCP05 (6)
  • KCP05B (6)
  • KCP10 (6)
  • KCP10B (6)
  • KCP25 (6)
  • KCP25B (6)
  • KCP30 (6)
  • KCP30B (4)
  • KCP40 (4)
  • KCP40B (4)
  • KCPK05 (6)
  • KCS10B (6)
  • KCU10 (6)
  • KCU25 (6)
  • KD050 (2)
  • KD081 (2)
  • KD100 (2)
  • KD120 (2)
  • KD1400 (2)
  • KD1405 (2)
  • KD1425 (2)
  • KT125 (4)
  • KT150 (2)
  • KT175 (4)
  • KT315 (6)
  • KT325 (4)
  • KTP10 (2)
  • KU10T (6)
  • KU30T (6)
  • KY1310 (2)
  • KY1320 (4)
  • KY1540 (2)
  • KY1615 (4)
  • KY2000 (2)
  • KY2100 (2)
  • KY3000 (4)
  • KY3400 (2)
  • KY3500 (4)
  • KY4300 (2)
  • KY4400 (4)
  • KYHK15B (4)
  • KYK10 (2)
  • KYK25 (2)
  • KYK35 (4)
  • KYS25 (2)
  • KYS30 (2)
  • NL200 (2)
  • NL250 (6)
  • NL300 (2)
  • NL920 (6)
  • PS5 (4)
  • SP0819 (2)
  • SP4019 (2)
  • THM (2)
  • TN10P (6)
  • TN10U (4)
  • TN15M (4)
  • TN15U (4)
  • TN2000 (2)
  • TN20K (4)
  • TN20P (6)
  • TN30M (6)
  • TN30P (4)
  • TN4000 (2)
  • TN5015 (4)
  • TN5020 (4)
  • TN5105 (6)
  • TN5120 (6)
  • TN6010 (4)
  • TN6025 (2)
  • TN7005 (6)
  • TN7010 (6)
  • TN7015 (6)
  • TN7025 (6)
  • TN7035 (2)
  • TN7105 (4)
  • TN7110 (4)
  • TN7115 (6)
  • TN7125 (4)
  • TN7135 (2)
  • TN8025 (6)
  • TTI15 (4)
  • TTS (2)
  • TTX (2)
  • WBH10C (4)
  • WBH10P (2)
  • WBH10U (2)
  • WBH20P (4)
  • WBH25P (2)
  • WBH25U (4)
  • WBH30P (2)
  • WBK40U (2)
  • WBK45U (4)
  • WDN00U (2)
  • WDN25U (2)
  • WK05CT (6)
  • WK15CT (2)
  • WK20CT (6)
  • WM15CT (6)
  • WM25CT (6)
  • WM35CT (6)
  • WP15CT (6)
  • WP20TT (2)
  • WP25CT (6)
  • WP35CT (6)
  • WS10PT (6)
  • WS25PT (6)
  • WU10HT (6)
  • WU10PT (4)
  • WU25PT (4)
Wiper Insert
Wiper Insert
  • N (6)
  • Y (6)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 2.5591 in (2)
  • 4.3307 in (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 65.0 mm (2)
  • 110.0 mm (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (6)
  • B L (4)
  • C A (4)
  • C N (4)
  • D P (4)
  • H T (6)
  • H W (6)
other
Cutting Condition Material
Cutting Condition Material
  • H-All (4)
  • K-All (6)
  • K1 (2)
  • M-All (6)
  • N-All (6)
  • P-All (6)
  • S-All (6)
  • S2 (4)
  • S4 (2)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 6 of 6 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
6319738 PSC50DDJNR11 PSC50DDJNR11 60.0000 2.362 35.0000 1.378 65.0000 2.559 DN..110408/DN..332 0.85
    List price:
    $318.63 /each.
    Your price::
    Qty
    6319739 PSC50DDJNR1506 PSC50DDJNR1506 60.0000 2.362 35.0000 1.378 110.0000 4.330 DN..150608/DN..442 0.87
      List price:
      $318.63 /each.
      Your price::
      Qty
      6319737 PSC50DDJNL1504 PSC50DDJNL1504 60.0000 2.362 35.0000 1.378 110.0000 4.330 DN..150408/DN..432 0.70
        List price:
        $318.63 /each.
        Your price::
        Qty
        6319735 PSC50DDJNL11 PSC50DDJNL11 60.0000 2.362 35.0000 1.378 65.0000 2.559 DN..110408/DN..332 0.85
          List price:
          $318.63 /each.
          Your price::
          Qty
          6319740 PSC50DDJNR1504 PSC50DDJNR1504 60.0000 2.362 35.0000 1.378 110.0000 4.330 DN..150408/DN..432 0.70
            List price:
            $318.63 /each.
            Your price::
            Qty
            6319736 PSC50DDJNL1506 PSC50DDJNL1506 60.0000 2.362 35.0000 1.378 110.0000 4.330 DN..150608/DN..442 0.87
              List price:
              $318.63 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              product-image
              Please adjust the following properties from

              ISO Catalog Number

              ANSI Catalog Number

              to find similar products.
              You are about to create a duplicate . Do you want to proceed?
              You are about to delete Do you want to proceed?
              What would you like to rename your to?
              Please enter a valid name
              Please enter a name for the duplicate
              Please enter a valid name
              You are about to add to your My Solutions page. Do you want to proceed?
              Please enter a valid name
              Send a copy of

              Please enter a valid Email
              Please enter a valid name

              We have found the following CAD Drawings

              Select the files you are looking for and download them all at once

              You should be logged to see your dashboard information
              The product/s () you were trying to add to the cart is/are not available, please contact customer service.
              item(s) successfully added to the cart
              View Cart