Order Products Online
successfully added to cart
View Cart
COVID-19: Jaké jsou reakce firmy WIDIA

Zjistit více

EXIT SEARCH
Back to Solution

Suggestions

Product Suggestions

Product Categories

Resources

Contact us
M-Clamping
M-Clamping
M-Clamping
M-Clamping

MDUN 93° • KM63TS™

M-Clamping

Uses and application

  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum

Workpiece Materials

P
M
K
N
S
H
M-Clamping
Filters and Columns
Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (16)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (16)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (16)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (16)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (16)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (16)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (16)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (16)
  • M Stainless Steel (16)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (16)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (16)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (16)
  • K Cast Iron (16)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (16)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (16)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (16)
  • N Non-Ferrous Materials (16)
    • N1
      Wrought Aluminum
      (16)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (16)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (16)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (16)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (16)
    • N6
      Carbon, Graphite Composites, CFRP
      (16)
    • N7
      MMC's
      (16)
  • S High-Temp Alloys (16)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (16)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (16)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (16)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (16)
  • H Hardened Materials (16)
    • H1
      Hardened Materials 44-48 HRC
      (16)
    • H2
      Hardened Materials 48-55 HRC
      (16)
    • H3
      Hardened Materials 56-60 HRC
      (16)
    • H4
      Hardened Materials >60 HRC
      (16)
Applications
  • Back Boring Back Boring (15)
  • Facing Facing (16)
  • Multiple Direction Cutting Multiple Direction Cutting (16)
  • Profiling Profiling (15)
  • TRN Boring TRN Boring (15)
  • Turning Turning (16)
Cutting Condition
  • Heavily Interrupted Cut (16)
  • Interrupted (16)
  • Lightly Interrupted Cut (16)
  • Smooth Cut (16)
  • Varying Depth of Cut (16)
Tool Cutting Edge Angle
  • 93.0 (16)
to
Cutting Edges Per Insert
  • 1.0 (16)
  • 2.0 (16)
  • 4.0 (16)
to
cornerConfiguration
Corner Radius
  • 0.1 (16)
  • 0.102 (16)
  • 0.2 (16)
  • 0.203 (16)
  • 0.397 (16)
  • 0.4 (16)
  • 0.406 (16)
  • 0.41 (16)
  • 0.794 (16)
  • 0.8 (16)
  • 0.81 (16)
  • 1.191 (16)
  • 1.2 (16)
  • 1.588 (16)
  • 1.6 (16)
  • 2.381 (16)
to
Corner Radius
  • 0.004 (16)
  • 0.008 (16)
  • 0.0156 (16)
  • 0.016 (16)
  • 0.031 (16)
  • 0.0312 (16)
  • 0.0313 (16)
  • 0.032 (16)
  • 0.0469 (16)
  • 0.047 (16)
  • 0.0625 (16)
  • 0.0938 (16)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (16)
  • CM2 (16)
  • CPX (16)
  • CW2015 (16)
  • CW5025 (16)
  • K060 (16)
  • K090 (16)
  • K10M (16)
  • K10P (16)
  • K10U (16)
  • K15U (16)
  • K20K (16)
  • K25M (16)
  • K25P (16)
  • K313 (16)
  • K35P (16)
  • K420 (16)
  • K45 (16)
  • K68 (16)
  • KB1345 (16)
  • KB1610 (16)
  • KB1625 (16)
  • KB1630 (16)
  • KB5610 (16)
  • KB5625 (16)
  • KB5630 (16)
  • KB9610 (16)
  • KBH10 (16)
  • KBH10B (16)
  • KBH20 (16)
  • KBH20B (16)
  • KC210 (16)
  • KC250 (16)
  • KC5010 (16)
  • KC5025 (16)
  • KC5410 (16)
  • KC5510 (16)
  • KC5525 (16)
  • KC720 (16)
  • KC730 (16)
  • KC7310 (16)
  • KC732 (16)
  • KC8050 (16)
  • KC810 (16)
  • KC850 (16)
  • KC9010 (16)
  • KC9025 (16)
  • KC910 (16)
  • KC9105 (16)
  • KC9110 (16)
  • KC9120 (16)
  • KC9125 (16)
  • KC9140 (16)
  • KC9145 (16)
  • KC9215 (16)
  • KC9225 (16)
  • KC9240 (16)
  • KC9240NEW (16)
  • KC9245 (16)
  • KC9315 (16)
  • KC9320 (16)
  • KC9325 (16)
  • KC935 (16)
  • KC950 (16)
  • KC990 (16)
  • KCD25 (16)
  • KCK05 (16)
  • KCK05B (16)
  • KCK15 (16)
  • KCK15B (16)
  • KCK20 (16)
  • KCK20B (16)
  • KCM15 (16)
  • KCM15B (16)
  • KCM25 (16)
  • KCM25B (16)
  • KCM35 (16)
  • KCP05 (16)
  • KCP05B (16)
  • KCP10 (16)
  • KCP10B (16)
  • KCP25 (16)
  • KCP25B (16)
  • KCP30 (16)
  • KCP30B (16)
  • KCP40 (16)
  • KCP40B (16)
  • KCPK05 (16)
  • KCS10B (16)
  • KCU10 (16)
  • KCU25 (16)
  • KD050 (16)
  • KD081 (16)
  • KD100 (16)
  • KD120 (16)
  • KD1400 (16)
  • KD1405 (16)
  • KD1425 (16)
  • KT125 (16)
  • KT150 (16)
  • KT175 (16)
  • KT315 (16)
  • KTP10 (16)
  • KU10T (16)
  • KU30T (16)
  • KY1310 (16)
  • KY1320 (16)
  • KY1540 (16)
  • KY1615 (16)
  • KY2000 (16)
  • KY2100 (16)
  • KY3000 (16)
  • KY3400 (16)
  • KY3500 (16)
  • KY4300 (16)
  • KY4400 (16)
  • KYK10 (16)
  • KYK25 (16)
  • KYK35 (16)
  • KYS25 (16)
  • KYS30 (16)
  • NL250 (16)
  • NL920 (16)
  • TN10P (16)
  • TN10U (16)
  • TN15M (16)
  • TN15U (16)
  • TN20K (16)
  • TN20P (16)
  • TN30M (16)
  • TN30P (16)
  • TN5105 (16)
  • TN5120 (16)
  • TN6010 (16)
  • TN7005 (16)
  • TN7010 (16)
  • TN7015 (16)
  • TN7025 (16)
  • TN7115 (16)
  • TN8025 (16)
  • WBH10C (16)
  • WBH10P (16)
  • WBH10U (16)
  • WBH25P (16)
  • WBH25U (16)
  • WBH30P (16)
  • WBK45U (16)
  • WDN00U (16)
  • WDN25U (16)
  • WK05CT (16)
  • WK20CT (16)
  • WM15CT (16)
  • WM25CT (16)
  • WM35CT (16)
  • WP15CT (16)
  • WP25CT (16)
  • WP35CT (16)
  • WS10PT (16)
  • WS25PT (16)
  • WU10HT (16)
Wiper Insert
  • N (16)
  • Y (16)
Minimum Axial Groove Diameter
  • 1.2598 (3)
  • 1.26 (1)
  • 1.5748 (4)
  • 1.9685 (3)
  • 1.969 (1)
  • 2.4803 (4)
to
Minimum Axial Groove Diameter
  • 32.0 (4)
  • 40.0 (4)
  • 50.0 (4)
  • 63.0 (4)
to
Maximum Bore Depth
  • 45.17 (2)
  • 62.07 (2)
  • 77.14 (2)
  • 88.23 (2)
  • 104.4 (2)
  • 112.07 (2)
  • 117.14 (2)
  • 149.4 (2)
to
Maximum Bore Depth
  • 1.778 (2)
  • 2.444 (2)
  • 3.037 (2)
  • 3.474 (2)
  • 4.11 (2)
  • 4.412 (2)
  • 4.612 (2)
  • 5.882 (2)
to
frontEnd
Clamp Style
  • M (16)
Insert Shape
  • D-DIAMOND/RHOMBIC 55 (16)
insertGeometry
Cutting Tool Material
  • B H (16)
  • B L (16)
  • C A (16)
  • C N (16)
  • D P (16)
  • H T (16)
  • H W (16)
backEnd
Back-End Diameter
  • 2.48 (1)
  • 2.4803 (15)
to
Back-End Diameter
  • 63.0 (16)
to
other
Platform
  • KM63 (13)
Tool Unit
  • M (16)
Over All Length [L]
  • 80.0 (2)
  • 90.0 (2)
  • 100.0 (2)
  • 125.0 (4)
  • 140.0 (4)
  • 170.0 (2)
to
Over All Length [L]
  • 3.1496 (2)
  • 3.5433 (2)
  • 3.937 (2)
  • 4.921 (1)
  • 4.9213 (3)
  • 5.5118 (4)
  • 6.6929 (2)
to
Insert Hand
  • N (16)
Cutting Condition Material
  • H-All (16)
  • K-All (16)
  • M-All (16)
  • N-All (16)
  • P-All (16)
  • S-All (16)
  • S4 (16)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 16 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
2265356 KM63TSS25FMDUNL15 KM63TSS25FMDUNL15 32.0000 1.259 17.0000 .6693 45.1700 1.778 80.0000 3.149 DN..150408/DN..432 0.94 2.08
    2265355 KM63TSS25FMDUNR15 KM63TSS25FMDUNR15 32.0000 1.259 17.0000 .6693 45.1700 1.778 80.0000 3.149 DN..150408/DN..432 0.95 2.09
      2265354 KM63TSS25KMDUNL15 KM63TSS25KMDUNL15 32.0000 1.259 17.0000 .6693 88.2300 3.474 125.0000 4.921 DN..150408/DN..432 1.13 2.50
        2265353 KM63TSS25KMDUNR15 KM63TSS25KMDUNR15 32.0000 1.260 17.0000 .6690 88.2300 3.474 125.0000 4.921 DNMA150408/DNMA432 1.13 2.50
          2265360 KM63TSS32GMDUNL15 KM63TSS32GMDUNL15 40.0000 1.574 22.0000 .8661 62.0700 2.444 90.0000 3.543 DN..150408/DN..432 1.05 2.30
            2265359 KM63TSS32GMDUNR15 KM63TSS32GMDUNR15 40.0000 1.574 22.0000 .8661 62.0700 2.444 90.0000 3.543 DN..150408/DN..432 1.05 2.30
              2265358 KM63TSS32LMDUNL15 KM63TSS32LMDUNL15 40.0000 1.574 22.0000 .8661 112.0700 4.412 140.0000 5.511 DN..150408/DN..432 1.36 2.99
                2265357 KM63TSS32LMDUNR15 KM63TSS32LMDUNR15 40.0000 1.574 22.0000 .8661 112.0700 4.412 140.0000 5.511 DN..150408/DN..432 1.36 2.99
                  2265364 KM63TSS40HMDUNL15 KM63TSS40HMDUNL15 50.0000 1.969 27.0000 1.063 77.1400 3.037 100.0000 3.937 DN..150408/DN..432 1.32 2.90
                    2265363 KM63TSS40HMDUNR15 KM63TSS40HMDUNR15 50.0000 1.968 27.0000 1.063 77.1400 3.037 100.0000 3.937 DN..150408/DN..432 1.31 2.89
                      2265362 KM63TSS40LMDUNL15 KM63TSS40LMDUNL15 50.0000 1.968 27.0000 1.063 117.1400 4.612 140.0000 5.511 DN..150408/DN..432 1.70 3.74
                        2265361 KM63TSS40LMDUNR15 KM63TSS40LMDUNR15 50.0000 1.968 27.0000 1.063 117.1400 4.612 140.0000 5.511 DN..150408/DN..432 1.69 3.73
                          2265368 KM63TSS50KMDUNL15 KM63TSS50KMDUNL15 63.0000 2.480 35.0000 1.378 104.4000 4.110 125.0000 4.921 DN..150408/DN..432 1.97 4.34
                            2265367 KM63TSS50KMDUNR15 KM63TSS50KMDUNR15 63.0000 2.480 35.0000 1.378 104.4000 4.110 125.0000 4.921 DN..150408/DN..432 1.97 4.34
                              2265366 KM63TSS50PMDUNL15 KM63TSS50PMDUNL15 63.0000 2.480 35.0000 1.378 149.4000 5.882 170.0000 6.692 DN..150408/DN..432 2.63 5.80
                                2265365 KM63TSS50PMDUNR15 KM63TSS50PMDUNR15 63.0000 2.480 35.0000 1.378 149.4000 5.882 170.0000 6.692 DN..150408/DN..432 2.63 5.80
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor

                                  SUPPORT

                                  Product Support

                                  Email | 888.539.5145

                                  Order Support

                                  Email | 420 800 900 840

                                  Chat With an Expert.
                                  Available 8am-6pm EST

                                  CAREERS

                                  Find a Job

                                  SHOP & SOCIAL

                                  About Us

                                  Read the WIDIA-GTD Story

                                  Read the WIDIA-Hanita Story

                                  STAY IN TOUCH

                                  Susbcribe to our newsletter

                                   

                                  Buy WIDIA Products at Amazon

                                  Buy WIDIA Merchandise

                                  © 2019 WIDIA Product Group 2018, Zásady ochrany osobních údajů

                                  If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                  You are about to create a duplicate . Do you want to proceed?
                                  You are about to delete Do you want to proceed?
                                  What would you like to rename your to?
                                  Please enter a valid name
                                  Please enter a name for the duplicate
                                  Please enter a valid name
                                  You are about to add to your My Solutions page. Do you want to proceed?
                                  Please enter a valid name
                                  Send a copy of

                                  Please enter a valid Email
                                  Please enter a valid name

                                  We have found the following CAD Drawings

                                  Select the files you are looking for and download them all at once

                                  Can’t find the file type you’re looking for?
                                  Request Drawings »

                                  You should be logged to see your dashboard information
                                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                  item(s) successfully added to the cart
                                  View Cart