successfully added to cart
View Cart
P-Clamping
P-Clamping
P-Clamping
P-Clamping

PDUN 93° • KM63TS™

P-Clamping

Uses and application

  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Facing Facing (8)
  • Multiple Direction Cutting Multiple Direction Cutting (8)
  • Turning Turning (8)
Workpiece Material
  • P Steel (8)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (8)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (8)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (8)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (8)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (8)
  • M Stainless Steel (8)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (8)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (8)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (8)
  • K Cast Iron (8)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (8)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (8)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (8)
  • N Non-Ferrous Materials (8)
    • N1
      Wrought Aluminum
      (8)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (8)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (8)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (8)
    • N6
      Carbon, Graphite Composites, CFRP
      (6)
    • N7
      MMC's
      (8)
  • S High-Temp Alloys (8)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (8)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (8)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (8)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (8)
  • H Hardened Materials (6)
    • H1
      Hardened Materials 44-48 HRC
      (6)
    • H2
      Hardened Materials 48-55 HRC
      (6)
    • H3
      Hardened Materials 56-60 HRC
      (6)
    • H4
      Hardened Materials >60 HRC
      (6)
Cutting Condition
  • Heavily Interrupted Cut (8)
  • Interrupted (6)
  • Lightly Interrupted Cut (8)
  • Smooth Cut (8)
  • Varying Depth of Cut (8)
Cutting Condition Material
  • H-All (6)
  • K-All (8)
  • K1 (2)
  • M-All (8)
  • N-All (8)
  • P-All (8)
  • S-All (8)
  • S2 (6)
Cutting Edges Per Insert
  • 1.0 (6)
  • 2.0 (8)
  • 4.0 (8)
to
cornerConfiguration
Corner Radius
  • 0.1 (2)
  • 0.102 (6)
  • 0.2 (2)
  • 0.34 (6)
  • 0.397 (8)
  • 0.4 (8)
  • 0.406 (6)
  • 0.792 (6)
  • 0.794 (8)
  • 0.8 (8)
  • 1.191 (8)
  • 1.2 (8)
  • 1.6 (6)
to
Corner Radius
  • 0.004 (8)
  • 0.008 (2)
  • 0.013 (6)
  • 0.0156 (8)
  • 0.016 (8)
  • 0.031 (8)
  • 0.0312 (8)
  • 0.0313 (8)
  • 0.0469 (8)
  • 0.047 (6)
  • 0.0625 (6)
  • 0.063 (6)
  • 0.312 (6)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (6)
  • CL4 (6)
  • CM2 (6)
  • CM3 (6)
  • CPX (6)
  • CW2 (6)
  • CW2015 (6)
  • CW5025 (6)
  • HK1500 (6)
  • HT2 (8)
  • K090 (6)
  • K10M (6)
  • K10P (6)
  • K10U (6)
  • K15U (6)
  • K20K (6)
  • K25M (8)
  • K25P (6)
  • K313 (8)
  • K35P (6)
  • K68 (6)
  • KB1340 (2)
  • KB9610 (6)
  • KB9640 (2)
  • KBH10 (6)
  • KBH10B (6)
  • KBH20 (6)
  • KBH20B (6)
  • KC210 (6)
  • KC5010 (8)
  • KC5025 (8)
  • KC5410 (6)
  • KC5510 (8)
  • KC5525 (8)
  • KC730 (2)
  • KC7310 (8)
  • KC8050 (8)
  • KC810 (8)
  • KC850 (8)
  • KC9010 (8)
  • KC9025 (8)
  • KC910 (6)
  • KC9105 (8)
  • KC9110 (8)
  • KC9120 (8)
  • KC9125 (8)
  • KC9140 (8)
  • KC9145 (6)
  • KC9210 (6)
  • KC9215 (8)
  • KC9225 (8)
  • KC9240 (8)
  • KC9240NEW (8)
  • KC9245 (8)
  • KC9315 (8)
  • KC9320 (8)
  • KC9325 (8)
  • KC935 (8)
  • KC950 (6)
  • KC990 (8)
  • KCK05 (8)
  • KCK05B (8)
  • KCK15 (8)
  • KCK15B (8)
  • KCK20 (8)
  • KCK20B (8)
  • KCM15 (8)
  • KCM15B (8)
  • KCM25 (8)
  • KCM25B (8)
  • KCM35 (6)
  • KCM35B (6)
  • KCP05 (8)
  • KCP05B (8)
  • KCP10 (8)
  • KCP10B (8)
  • KCP25 (8)
  • KCP25B (8)
  • KCP30 (8)
  • KCP30B (6)
  • KCP40 (6)
  • KCP40B (6)
  • KCPK05 (8)
  • KCS10B (8)
  • KCU10 (8)
  • KCU25 (8)
  • KT125 (6)
  • KT175 (6)
  • KT315 (8)
  • KT325 (8)
  • KU10T (8)
  • KU30T (8)
  • KY1320 (6)
  • KY1615 (6)
  • KY3000 (6)
  • KY3500 (6)
  • KY4400 (6)
  • KYHK15B (6)
  • KYK35 (6)
  • NL200 (6)
  • NL250 (8)
  • NL300 (6)
  • NL920 (8)
  • PS5 (8)
  • SP0819 (6)
  • THM (6)
  • TN10P (8)
  • TN10U (6)
  • TN15M (6)
  • TN15U (6)
  • TN2000 (6)
  • TN20K (6)
  • TN20P (8)
  • TN30M (8)
  • TN30P (6)
  • TN4000 (6)
  • TN5015 (8)
  • TN5020 (8)
  • TN5105 (8)
  • TN5120 (8)
  • TN6010 (6)
  • TN6025 (6)
  • TN7005 (8)
  • TN7010 (8)
  • TN7015 (8)
  • TN7025 (8)
  • TN7035 (6)
  • TN7105 (8)
  • TN7110 (8)
  • TN7115 (8)
  • TN7125 (8)
  • TN7135 (6)
  • TN8025 (8)
  • TTI15 (8)
  • TTS (6)
  • TTX (6)
  • WBH10C (6)
  • WBH20P (6)
  • WBH25U (6)
  • WBK40U (2)
  • WBK45U (6)
  • WK05CT (8)
  • WK15CT (6)
  • WK20CT (8)
  • WM15CT (8)
  • WM25CT (8)
  • WM35CT (8)
  • WP15CT (8)
  • WP20TT (2)
  • WP25CT (8)
  • WP35CT (8)
  • WS10PT (8)
  • WS25PT (8)
  • WU10HT (8)
  • WU10PT (8)
  • WU25PT (8)
Hand Of Tool
  • L (4)
  • R (4)
Minimum Axial Groove Diameter
  • 1.26 (2)
  • 1.575 (2)
  • 1.969 (2)
  • 2.48 (2)
to
Minimum Axial Groove Diameter
  • 32.0 (2)
  • 40.0 (2)
  • 50.0 (2)
  • 63.0 (2)
to
Maximum Bore Depth
  • 88.52 (2)
  • 112.07 (2)
  • 113.37 (1)
  • 117.38 (1)
  • 149.4 (2)
to
Maximum Bore Depth
  • 3.485 (2)
  • 4.412 (2)
  • 4.464 (1)
  • 4.621 (1)
  • 5.866 (1)
  • 5.882 (1)
to
Wiper Insert
  • N (8)
  • Y (8)
insertGeometry
Cutting Tool Material
  • B H (8)
  • B L (6)
  • C A (6)
  • C N (6)
  • D P (6)
  • H T (8)
  • H W (8)
other
Over All Length [L]
  • 125.0 (2)
  • 140.0 (4)
  • 170.0 (2)
to
Over All Length [L]
  • 4.92 (2)
  • 5.512 (4)
  • 6.693 (2)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 8 of 8 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
2257147 KM63TSS25KPDUNL11 KM63TSS25KPDUNL11 32.0000 1.260 17.0000 .6690 88.5200 3.485 125.0000 4.920 DN..110408/DN..332 1.13 2.50
    List price:
    $501.10 /each.
    Your price::
    Qty
    2407985 KM63TSS25KPDUNR11 KM63TSS25KPDUNR11 32.0000 1.260 17.0000 .6690 88.5200 3.485 125.0000 4.920 DN..110408/DN..332 1.13 2.50
      List price:
      $501.10 /each.
      Your price::
      Qty
      2407986 KM63TSS32LPDUNR15 KM63TSS32LPDUNR15 40.0000 1.575 22.0000 .8660 112.0700 4.412 140.0000 5.512 DN..150608/DN..442 1.35 2.97
        List price:
        $501.10 /each.
        Your price::
        Qty
        2407987 KM63TSS32LPDUNL15 KM63TSS32LPDUNL15 40.0000 1.575 22.0000 .8660 112.0700 4.412 140.0000 5.512 DN..150608/DN..442 1.35 2.97
          List price:
          $501.10 /each.
          Your price::
          Qty
          2407988 KM63TSS40LPDUNR15 KM63TSS40LPDUNR15 50.0000 1.969 27.0000 1.063 117.3800 4.621 140.0000 5.512 DN..150608/DN..442 1.70 3.75
            List price:
            $501.10 /each.
            Your price::
            Qty
            2407989 KM63TSS40LPDUNL15 KM63TSS40LPDUNL15 50.0000 1.969 27.0000 1.063 113.3700 4.464 140.0000 5.512 DN..150608/DN..442 1.69 3.73
              List price:
              $501.10 /each.
              Your price::
              Qty
              2407990 KM63TSS50PPDUNR15 KM63TSS50PPDUNR15 63.0000 2.480 35.0000 1.378 149.4000 5.866 170.0000 6.693 DN..150608/DN..442 2.73 6.03
                List price:
                $501.10 /each.
                Your price::
                Qty
                2407991 KM63TSS50PPDUNL15 KM63TSS50PPDUNL15 63.0000 2.480 35.0000 1.378 149.4000 5.882 170.0000 6.693 DN..150608/DN..442 2.73 6.03
                  List price:
                  $501.10 /each.
                  Your price::
                  Qty
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty

                  Sold in pkg. of

                  product-image
                  Please adjust the following properties from

                  ISO Catalog Number

                  ANSI Catalog Number

                  to find similar products.
                  If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                  You are about to create a duplicate . Do you want to proceed?
                  You are about to delete Do you want to proceed?
                  What would you like to rename your to?
                  Please enter a valid name
                  Please enter a name for the duplicate
                  Please enter a valid name
                  You are about to add to your My Solutions page. Do you want to proceed?
                  Please enter a valid name
                  Send a copy of

                  Please enter a valid Email
                  Please enter a valid name

                  We have found the following CAD Drawings

                  Select the files you are looking for and download them all at once

                  You should be logged to see your dashboard information
                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                  item(s) successfully added to the cart
                  View Cart