successfully added to cart
View Cart
Frézovací tělesa M270 pro vysoké posuvy
Frézovací tělesa M270 pro vysoké posuvy
Frézovací tělesa M270 pro vysoké posuvy
Frézovací tělesa M270 pro vysoké posuvy

Řada M270 pro vysoké posuvy • Upínané šroubem

Frézovací tělesa M270 pro vysoké posuvy

Features and benefits

  • Vysoké úběry materiálu.

  • Vynikající pro aplikace s velkým vyložením.

  • Pro hrubování a střední dokončování.

Uses and application

  • Shank - Screw-OnShank - Screw-On
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • Slotting: Square EndSlotting: Square End
  • Face MillingFace Milling
  • Ramping: BlankRamping: Blank
  • PocketingPocketing
  • Helical MillingHelical Milling
  • Milling - Through CoolantMilling - Through Coolant

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (3)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (3)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (3)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (3)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (3)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (3)
  • M Stainless Steel (3)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (3)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (3)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (3)
  • K Cast Iron (3)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (3)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (3)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (3)
  • S High-Temp Alloys (3)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (3)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (3)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (3)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (3)
  • H Hardened Materials (3)
    • H1
      Hardened Materials 44-48 HRC
      (3)
    • H2
      Hardened Materials 48-55 HRC
      (3)
    • H3
      Hardened Materials 56-60 HRC
      (3)
Applications
Applications
  • Face Milling Face Milling (3)
  • Pocket Pocket (3)
  • Pocket Helical Pocket Helical (3)
  • Pocket Milling Pocket Milling (3)
  • Ramping Ramping (3)
  • Shoulder Milling Shoulder Milling (3)
  • Shoulder Square End Shoulder Square End (3)
  • Slot Milling Slot Milling (3)
  • Slot Square End Slot Square End (3)
Cutting Diameter
Cutting Diameter
  • 12.0 mm (1)
  • 16.0 mm (1)
  • 20.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.4724 in (1)
  • 0.6299 in (1)
  • 0.7874 in (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.512 in (1)
  • 0.669 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 13.0 mm (1)
  • 17.0 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.0236 in (1)
  • 0.0354 in (1)
  • 0.0433 in (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.6 mm (1)
  • 0.9 mm (1)
  • 1.1 mm (1)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 25.0 mm (1)
  • 30.0 mm (1)
  • 40.0 mm (1)
Reach Min to Reach Max
Reach
Reach
  • 0.984 in (1)
  • 1.181 in (1)
  • 1.575 in (1)
Reach Min to Reach Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (3)
  • 2.0 (3)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.302 mm (2)
  • 0.303 mm (1)
  • 0.503 mm (1)
  • 0.504 mm (2)
  • 0.75 mm (1)
  • 1.0 mm (1)
  • 1.005 mm (1)
  • 1.006 mm (1)
  • 1.01 mm (1)
  • 1.25 mm (1)
  • 2.011 mm (1)
  • 2.013 mm (1)
  • 2.02 mm (1)
  • 3.042 mm (1)
  • 4.022 mm (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0119 in (3)
  • 0.0198 in (2)
  • 0.0199 in (1)
  • 0.0295 in (1)
  • 0.03 in (1)
  • 0.039 in (1)
  • 0.0396 in (2)
  • 0.0397 in (1)
  • 0.049 in (1)
  • 0.0792 in (1)
  • 0.0793 in (1)
  • 0.0795 in (1)
  • 0.1198 in (1)
  • 0.1583 in (1)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • TN2505 (3)
  • TN2510 (3)
  • TN2525 (3)
  • TN6525 (3)
  • TN6540 (3)
  • WU10PM (3)
backEnd
Back-End Diameter
Back-End Diameter
  • 0.5118 in (2)
  • 0.7087 in (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 13.0 mm (2)
  • 18.0 mm (1)
Back-End Diameter Min to Back-End Diameter Max
other
Over All Length [L]
Over All Length [L]
  • 42.0 mm (1)
  • 47.0 mm (1)
  • 59.0 mm (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 1.654 in (1)
  • 1.85 in (1)
  • 2.323 in (1)
Over All Length [L] Min to Over All Length [L] Max
Head Length [L2]
Head Length [L2]
  • 25.0 mm (1)
  • 30.0 mm (1)
  • 40.0 mm (1)
Head Length [L2] Min to Head Length [L2] Max
Head Length [L2]
Head Length [L2]
  • 0.984 in (1)
  • 1.181 in (1)
  • 1.575 in (1)
Head Length [L2] Min to Head Length [L2] Max
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 3 of 3 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [G3X] Connection Thread Size External [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [WF] Width of Flat [WF] Width of Flat [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts [Z] Number of Flutes Gage Insert Gage Insert 3 Max RPM Coolant Supply Weight Kilograms
3926546 M270TD012M08 M270TD012M08 12.0000 .4724 13.0 .5118 8.5000 .3350 M8 42.0000 1.654 25.0000 .9840 10.0000 .3940 0.6000 .0236 1 2 M270HF12 M270HF13 55000 Y 0.02
    List price:
    $261.82 /each.
    Your price::
    Qty
    3926547 M270TD016M08 M270TD016M08 16.0000 .6299 13.0 .5118 8.5000 .3350 M8 47.0000 1.850 30.0000 1.181 10.0000 .3940 0.9000 .0354 1 2 M270HF16 M270HF17 53000 Y 0.09
      List price:
      $267.64 /each.
      Your price::
      Qty
      3926548 M270TD020M10 M270TD020M10 20.0000 .7874 18.0 .7087 10.5000 .4130 M10 59.0000 2.323 40.0000 1.575 14.0000 .5510 1.1000 .0433 1 2 M270HF20   52000 Y 0.07
        List price:
        $280.43 /each.
        Your price::
        Qty
        List price:
        Discount: %
        Your price::
        Replacement This item is not available
        Replacement Product This item may be available through a distributor
        Qty

        Sold in pkg. of

        product-image
        Please adjust the following properties from

        ISO Catalog Number

        ANSI Catalog Number

        to find similar products.
        You are about to create a duplicate . Do you want to proceed?
        You are about to delete Do you want to proceed?
        What would you like to rename your to?
        Please enter a valid name
        Please enter a name for the duplicate
        Please enter a valid name
        You are about to add to your My Solutions page. Do you want to proceed?
        Please enter a valid name
        Send a copy of

        Please enter a valid Email
        Please enter a valid name

        We have found the following CAD Drawings

        Select the files you are looking for and download them all at once

        You should be logged to see your dashboard information
        The product/s () you were trying to add to the cart is/are not available, please contact customer service.
        item(s) successfully added to the cart
        View Cart