Top Drill G™ • Non-Ferrous / Cast Iron Materials
FiltersX
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
-
K Cast Iron (530)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(530)
-
-
N Non-Ferrous Materials (530)
-
N1Wrought Aluminum(530)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(530)
-
N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass(530)
-
Applications
-
Pre-Condition (663)
-
Drilling (67)
-
Inclined Entry Drilling (67)
-
Inclined Exit Drilling (67)
-
Stacked Plates Drilling (67)
-
Cross Hole Drilling (24)
-
Convex Drilling (15)
-
Corner Style SquareEnd Drilling (15)
-
CornerStyle Chamfer Drilling (15)
-
Counterboring (15)
-
Countersinking (15)
-
Flat Bottom Drilling (15)
-
X-Offset Drilling (15)
Cutting Diameter
to
Cutting Diameter
to
Maximum Hole Depth [L4]
to
Maximum Hole Depth [L4]
to
Reach
to
Reach
to
Connection Style
-
Straight-Cylindrical (663)
Number of Flutes
-
2 (663)
application
Coating
-
Uncoated (663)
Grade Of Cutting Tool
-
WN10HD (663)
Hand Of Tool
-
R (663)
Drill Type
-
81-01 (663)
frontEnd
Point Angle
to
backEnd
Connection Type
-
CYLINDRICAL (663)
Back-End Diameter
to
Back-End Diameter
to
other
Grade
-
WN10HD (663)
Platform
-
Top Drill G (52)
Tool Unit
-
M (497)
-
I (166)
Over All Length [L]
to
Over All Length [L]
to
No filters matching ""
Narrow by category:
View Products in
Metric
Inch
-
Drilling
-
Drilling: Inclined Entry
-
Drilling: Inclined Exit
-
Drilling: Stacked Plates
-
Drilling Depth: 5x
-
Shank - Cylindrical Plain ≤h6
-
38498
-
38550
-
Drilling - Through Coolant
-
Through Coolant: MQL (Minimum Quantity Lubricant): Drilling
View Products
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | [D1] Drill Diameter M | [D1] Drill Diameter M | [D1] Wire Size | [L] Overall Length | [L] Overall Length | |
|---|---|---|---|---|---|---|---|---|---|
| 4157950 | TDG532A03000 | TDG532A03000 | WN10HD | 3.0000 | .1181 | 66.0000 | 2.598 | ||
| 4157951 | TDG532A03048 | TDG532A03048 | WN10HD | 3.048 | .1200 | 31 | 66.000 | 2.598 | |
| 4157952 | TDG532A03100 | TDG532A03100 | WN10HD | 3.100 | .1220 | 66.000 | 2.598 | ||
| 4157973 | TDG532A03175 | TDG532A03175 | WN10HD | 3.1750 | .1250 | 66.0000 | 2.598 | ||
| 4157974 | TDG532A03200 | TDG532A03200 | WN10HD | 3.200 | .1260 | 66.000 | 2.598 | ||
| 4157975 | TDG532A03264 | TDG532A03264 | WN10HD | 3.2640 | .1285 | 30 | 66.0000 | 2.598 |
-
-
-
-
-
Drilling Depth: 8x
-
-
-
-
-
View Products
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | [D1] Drill Diameter M | [D1] Drill Diameter M | [D1] Wire Size | [L] Overall Length | [L] Overall Length | |
|---|---|---|---|---|---|---|---|---|---|
| 4158475 | TDG533A03000 | TDG533A03000 | WN10HD | 3.000 | .1181 | 78.000 | 3.070 | ||
| 4158476 | TDG533A03048 | TDG533A03048 | WN10HD | 3.048 | .1200 | 31 | 78.000 | 3.070 | |
| 4158477 | TDG533A03100 | TDG533A03100 | WN10HD | 3.100 | .1220 | 78.000 | 3.070 | ||
| 4158478 | TDG533A03175 | TDG533A03175 | WN10HD | 3.175 | .1250 | 78.000 | 3.070 | ||
| 4158479 | TDG533A03200 | TDG533A03200 | WN10HD | 3.200 | .1260 | 78.000 | 3.070 | ||
| 4158480 | TDG533A03264 | TDG533A03264 | WN10HD | 3.264 | .1285 | 30 | 78.000 | 3.070 |
-
-
-
-
-
Drilling Depth: 12x
-
-
-
-
-
View Products
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | [D1] Drill Diameter M | [D1] Drill Diameter M | [D1] Wire Size | [L] Overall Length | [L] Overall Length | |
|---|---|---|---|---|---|---|---|---|---|
| 4157357 | TDG534A03000 | TDG534A03000 | WN10HD | 3.000 | .1181 | 93.000 | 3.661 | ||
| 4157358 | TDG534A03048 | TDG534A03048 | WN10HD | 3.048 | .1200 | 31 | 93.000 | 3.661 | |
| 4157359 | TDG534A03100 | TDG534A03100 | WN10HD | 3.100 | .1220 | 93.000 | 3.661 | ||
| 4157360 | TDG534A03175 | TDG534A03175 | WN10HD | 3.175 | .1250 | 93.000 | 3.661 | ||
| 4157361 | TDG534A03200 | TDG534A03200 | WN10HD | 3.200 | .1260 | 93.000 | 3.661 | ||
| 4157362 | TDG534A03264 | TDG534A03264 | WN10HD | 3.264 | .1285 | 30 | 93.000 | 3.661 |
