Oznámení

Označit vše jako přečtené

Tool Bodies

Vybrat filtry
Filters
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (47)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (47)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (47)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (47)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (47)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (47)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (47)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (47)
  • M Stainless Steel (47)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (47)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (47)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (47)
  • K Cast Iron (47)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (47)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (47)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (47)
  • S High-Temp Alloys (47)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (47)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (47)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (47)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (47)
  • H Hardened Materials (47)
    • H1
      Hardened Materials 44-48 HRC
      (47)
    • H2
      Hardened Materials 48-55 HRC
      (47)
    • H3
      Hardened Materials 56-60 HRC
      (47)
Applications
Applications
  • Face Milling Face Milling (47)
  • Pocket Pocket (47)
  • Pocket Helical Pocket Helical (47)
  • Pocket Milling Pocket Milling (47)
  • Profile Milling Profile Milling (47)
  • Ramping Ramping (47)
  • Shoulder Ball Nose Shoulder Ball Nose (47)
  • Shoulder Milling Shoulder Milling (47)
  • Slot Milling Slot Milling (47)
  • Slot Square End Slot Square End (47)
Cutting Diameter
Cutting Diameter
  • 0.197 in (4)
  • 0.315 in (4)
  • 0.354 in (3)
  • 0.394 in (5)
  • 0.473 in (1)
  • 0.512 in (3)
  • 0.591 in (4)
  • 0.63 in (1)
  • 0.709 in (1)
  • 0.787 in (2)
  • 0.906 in (2)
  • 1.102 in (1)
  • 1.181 in (1)
  • 1.26 in (2)
  • 1.339 in (1)
  • 1.417 in (1)
  • 1.496 in (1)
  • 1.575 in (2)
  • 1.655 in (1)
  • 1.85 in (1)
  • 2.008 in (1)
  • 2.126 in (1)
  • 2.52 in (1)
  • 2.677 in (1)
  • 3.465 in (1)
  • 4.291 in (1)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 5.0 mm (4)
  • 8.0 mm (4)
  • 9.0 mm (3)
  • 10.0 mm (5)
  • 12.0 mm (1)
  • 13.0 mm (3)
  • 15.0 mm (4)
  • 16.0 mm (1)
  • 18.0 mm (1)
  • 20.0 mm (2)
  • 23.0 mm (2)
  • 28.0 mm (1)
  • 30.0 mm (1)
  • 32.0 mm (2)
  • 34.0 mm (1)
  • 36.0 mm (1)
  • 38.0 mm (1)
  • 40.0 mm (2)
  • 42.0 mm (1)
  • 47.0 mm (1)
  • 51.0 mm (1)
  • 54.0 mm (1)
  • 64.0 mm (1)
  • 68.0 mm (1)
  • 88.0 mm (1)
  • 109.0 mm (1)
Cutting Diameter Min komu Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 12.0 mm (4)
  • 15.0 mm (4)
  • 16.0 mm (3)
  • 20.0 mm (8)
  • 22.0 mm (1)
  • 25.0 mm (5)
  • 30.0 mm (1)
  • 32.0 mm (2)
  • 35.0 mm (2)
  • 40.0 mm (2)
  • 42.0 mm (2)
  • 50.0 mm (3)
  • 52.0 mm (3)
  • 63.0 mm (2)
  • 66.0 mm (1)
  • 80.0 mm (2)
  • 100.0 mm (1)
  • 125.0 mm (1)
Maximum Cutting Diameter Min komu Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.473 in (4)
  • 0.591 in (4)
  • 0.63 in (3)
  • 0.787 in (8)
  • 0.866 in (1)
  • 0.984 in (5)
  • 1.181 in (1)
  • 1.26 in (2)
  • 1.379 in (2)
  • 1.575 in (2)
  • 1.655 in (2)
  • 1.969 in (3)
  • 2.047 in (3)
  • 2.48 in (2)
  • 2.598 in (1)
  • 3.15 in (2)
  • 3.938 in (1)
  • 4.921 in (1)
Maximum Cutting Diameter Min komu Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 3.5 mm (15)
  • 5.0 mm (16)
  • 6.0 mm (10)
  • 8.0 mm (6)
Cutting Length Min komu Cutting Length Max
Cutting Length
Cutting Length
  • 0.138 in (15)
  • 0.197 in (16)
  • 0.237 in (10)
  • 0.315 in (6)
Cutting Length Min komu Cutting Length Max
Reach
Reach
  • 0.787 in (2)
  • 0.906 in (3)
  • 1.181 in (4)
  • 1.379 in (2)
  • 1.575 in (13)
  • 1.693 in (4)
  • 1.772 in (1)
  • 1.969 in (6)
  • 2.165 in (1)
  • 2.362 in (5)
  • 2.52 in (1)
  • 2.757 in (1)
  • 3.15 in (2)
  • 3.938 in (2)
Reach Min komu Reach Max
Reach
Reach
  • 20.0 mm (2)
  • 23.0 mm (3)
  • 30.0 mm (4)
  • 35.0 mm (2)
  • 40.0 mm (13)
  • 43.0 mm (4)
  • 45.0 mm (1)
  • 50.0 mm (6)
  • 55.0 mm (1)
  • 60.0 mm (5)
  • 64.0 mm (1)
  • 70.0 mm (1)
  • 80.0 mm (2)
  • 100.0 mm (2)
Reach Min komu Reach Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (15)
  • B-Cutter Retention Screw (1)
  • Screw-On Connection (12)
  • Straight-Cylindrical (15)
  • Weldon (4)
Number of Flutes
Number of Flutes
  • 2 (18)
  • 3 (7)
  • 4 (7)
  • 5 (6)
  • 6 (6)
  • 7 (1)
  • 8 (2)
cornerConfiguration
Corner Radius
Corner Radius
  • 0.138 in (15)
  • 0.197 in (16)
  • 0.237 in (10)
  • 0.315 in (6)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 3.5 mm (15)
  • 5.0 mm (16)
  • 6.0 mm (10)
  • 8.0 mm (6)
Corner Radius Min komu Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • TN2505 (47)
  • TN6525 (47)
  • TN6540 (47)
Maximum Ramp Angle
Maximum Ramp Angle
  • 2.2 (2)
  • 3.0 (2)
  • 3.5 (1)
  • 4.5 (3)
  • 5.2 (1)
  • 5.5 (1)
  • 5.8 (1)
  • 6.0 (1)
  • 6.1 (1)
  • 7.2 (1)
  • 8.0 (1)
  • 8.2 (1)
  • 8.5 (2)
  • 9.0 (6)
  • 9.3 (1)
  • 10.0 (1)
  • 10.5 (1)
  • 11.0 (1)
  • 12.0 (4)
  • 12.5 (1)
  • 18.0 (4)
  • 20.0 (6)
  • 22.0 (4)
Maximum Ramp Angle Min komu Maximum Ramp Angle Max
frontEnd
Neck Diameter
Neck Diameter
  • 1.063 in (1)
Neck Diameter Min komu Neck Diameter Max
Neck Diameter
Neck Diameter
  • 27.0 mm (1)
Neck Diameter Min komu Neck Diameter Max
Center Cutting
Center Cutting
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (19)
  • SCREW-ON (12)
  • SHELL MILL (16)
Back-End Diameter
Back-End Diameter
  • 12.0 mm (1)
  • 12.8 mm (1)
  • 13.0 mm (2)
  • 16.0 mm (10)
  • 18.0 mm (2)
  • 20.0 mm (5)
  • 21.0 mm (2)
  • 22.0 mm (8)
  • 25.0 mm (5)
  • 27.0 mm (3)
  • 29.0 mm (5)
  • 32.0 mm (2)
  • 40.0 mm (1)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.473 in (1)
  • 0.504 in (1)
  • 0.512 in (2)
  • 0.63 in (10)
  • 0.709 in (2)
  • 0.787 in (5)
  • 0.828 in (2)
  • 0.866 in (8)
  • 0.984 in (5)
  • 1.063 in (3)
  • 1.143 in (5)
  • 1.26 in (2)
  • 1.575 in (1)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""
Informace o produktech
Metrické
Palcové

PŮVODNÍ PRODUKT

Kopírovací frézy • Řada M170™

Stopka Weldon® • RD12T3..
(1 Products)
  • Shank - Cylindrical  Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
  • 3D Profiling3D Profiling
  • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
  • Slotting: Square EndSlotting: Square End
  • Face MillingFace Milling
  • Ramping: BlankRamping: Blank
  • PocketingPocketing
  • Helical MillingHelical Milling
  • Milling - Through CoolantMilling - Through Coolant
Informace o produktech
SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
3930960 M170D032Z03B32RD12 M170D032Z03B32RD12 32.0000 1.260 20.0000 .7870 32.0 1.259 125.0000 4.921 64.0000 2.520 6.0000 .2360 3 12.000 9500 Y 0.63
    Ceníková cena:
    $305,24 /každý.
    Vaše cena::
    Počet
    Ceníková cena:
    Sleva: %
    Vaše cena::
    Výměna Tato položka není k dispozici
    Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
    Počet

    Prodáváno v baleních z

    PŮVODNÍ PRODUKT

    Kopírovací frézy • Řada M170™

    Stopka Weldon® • RD1003..
    (2 Products)
    • Shank - Cylindrical  Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
    • 3D Profiling3D Profiling
    • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
    • Slotting: Square EndSlotting: Square End
    • Face MillingFace Milling
    • Ramping: BlankRamping: Blank
    • PocketingPocketing
    • Helical MillingHelical Milling
    • Milling - Through CoolantMilling - Through Coolant
    Informace o produktech
    SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
    3940703 M170D020Z02B20RD10 M170D020Z02B20RD10 20.0000 .7870 10.0000 .3940 20.0 .7874 110.0000 4.331 40.0000 1.575 5.0000 .1970 2 20.000 15900 Y 0.24
      Ceníková cena:
      $254,37 /každý.
      Vaše cena::
      Počet
      3940708 M170D025Z03B25RD10 M170D025Z03B25RD10 25.0000 .9840 15.0000 .5910 25.0 .9843 110.0000 4.331 40.0000 1.575 5.0000 .1970 3 9.000 12900 Y 0.35
        Ceníková cena:
        $292,53 /každý.
        Vaše cena::
        Počet
        Ceníková cena:
        Sleva: %
        Vaše cena::
        Výměna Tato položka není k dispozici
        Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
        Počet

        Prodáváno v baleních z

        PŮVODNÍ PRODUKT

        Kopírovací frézy • Řada M170™

        Stopka Weldon® • RD0702..
        (1 Products)
        • Shank - Cylindrical  Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
        • 3D Profiling3D Profiling
        • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
        • Slotting: Square EndSlotting: Square End
        • Face MillingFace Milling
        • Ramping: BlankRamping: Blank
        • PocketingPocketing
        • Helical MillingHelical Milling
        • Milling - Through CoolantMilling - Through Coolant
        Informace o produktech
        SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length Half Taper Clearance Angle [BHTCA] [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
        3929403 M170D015Z02B16RD07 M170D015Z02B16RD07 15.0000 .5910 8.0000 .3170 16.0 .6299 90.0000 3.543 40.0000 1.575 1.000 3.5000 .1380 2 18.000 21200 Y 0.11
          Ceníková cena:
          $221,69 /každý.
          Vaše cena::
          Počet
          Ceníková cena:
          Sleva: %
          Vaše cena::
          Výměna Tato položka není k dispozici
          Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
          Počet

          Prodáváno v baleních z

          PŮVODNÍ PRODUKT

          Kopírovací frézy • Řada M170™

          Nástrčné frézy • RD1604..
          (5 Products)
          • Milling - Side and FaceMilling - Side and Face
          • 3D Profiling3D Profiling
          • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
          • Slotting: Square EndSlotting: Square End
          • Face MillingFace Milling
          • Ramping: BlankRamping: Blank
          • PocketingPocketing
          • Helical MillingHelical Milling
          • Milling - Through CoolantMilling - Through Coolant
          Informace o produktech
          SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
          3926602 M170D050Z04RD16 M170D050Z04RD16 50.0000 1.969 34.0000 1.339 22.0 .8661 44.0000 1.732 40.0000 1.575 40.0000 1.575 8.0000 .3150 4 8.500 7900 Y 0.28
            Ceníková cena:
            $406,98 /každý.
            Vaše cena::
            Počet
            3934623 M170D052Z04RD16 M170D052Z04RD16 52.0000 2.047 36.0000 1.417 22.0 .8661 44.0000 1.732 50.0000 1.969 50.0000 1.969 8.0000 .3150 4 8.200 7650 Y 0.36
              Ceníková cena:
              $406,98 /každý.
              Vaše cena::
              Počet
              3934624 M170D063Z05RD16 M170D063Z05RD16 63.0000 2.480 47.0000 1.850 22.0 .8661 44.0000 1.732 40.0000 1.575 40.0000 1.575 8.0000 .3150 5 5.500 5300 Y 0.39
                Ceníková cena:
                $464,22 /každý.
                Vaše cena::
                Počet
                3934626 M170D080Z06RD16 M170D080Z06RD16 80.0000 3.150 64.0000 2.520 27.0 1.063 60.0000 2.362 50.0000 1.969 50.0000 1.969 8.0000 .3150 6 3.000 4900 Y 1.06
                  Ceníková cena:
                  $572,33 /každý.
                  Vaše cena::
                  Počet
                  3934629 M170D125Z08RD16 M170D125Z08RD16 125.0000 4.921 109.0000 4.291 40.0 1.574 90.0000 3.543 60.0000 2.362 60.0000 2.362 8.0000 .3150 8 2.200 3200 Y 2.90
                    Ceníková cena:
                    $1.050,00 /každý.
                    Vaše cena::
                    Počet
                    Ceníková cena:
                    Sleva: %
                    Vaše cena::
                    Výměna Tato položka není k dispozici
                    Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                    Počet

                    Prodáváno v baleních z

                    PŮVODNÍ PRODUKT

                    Kopírovací frézy • Řada M170™

                    Frézy se závitovou stopkou • RD07T1..
                    (1 Products)
                    • Shank - Screw-OnShank - Screw-On
                    • 3D Profiling3D Profiling
                    • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                    • Slotting: Square EndSlotting: Square End
                    • Face MillingFace Milling
                    • Ramping: BlankRamping: Blank
                    • PocketingPocketing
                    • Helical MillingHelical Milling
                    • Milling - Through CoolantMilling - Through Coolant
                    Informace o produktech
                    SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [G3X] Connection Thread Size External [L2] Head Length [L2] Head Length [WF] Width of Flat [WF] Width of Flat [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                    3935337 M170D012Z02M08RD07T M170D012Z02M08RD07T 12.0000 .4720 5.0000 .1970 12.8 .5039 8.5000 .3350 M8 23.0000 .9060 10.0000 .3940 3.5000 .1380 2 22.000 26200 Y 0.02
                      Ceníková cena:
                      $202,98 /každý.
                      Vaše cena::
                      Počet
                      Ceníková cena:
                      Sleva: %
                      Vaše cena::
                      Výměna Tato položka není k dispozici
                      Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                      Počet

                      Prodáváno v baleních z

                      PŮVODNÍ PRODUKT

                      Kopírovací frézy • Řada M170™

                      Válcová stopka • RD07T1..
                      (3 Products)
                      • Shank - Cylindrical  PlainShank - Cylindrical Plain
                      • 3D Profiling3D Profiling
                      • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                      • Slotting: Square EndSlotting: Square End
                      • Face MillingFace Milling
                      • Ramping: BlankRamping: Blank
                      • PocketingPocketing
                      • Helical MillingHelical Milling
                      • Milling - Through CoolantMilling - Through Coolant
                      Informace o produktech
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length Half Taper Clearance Angle [BHTCA] [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                      3935339 M170D012Z02A12RD07TL100 M170D012Z02A12RD07TL100 12.0000 .4720 5.0000 .1970 12.0 .4724 100.0000 3.937 20.0000 .7870   3.5000 .1380 2 22.000 26200 Y 0.07
                        Ceníková cena:
                        $202,98 /každý.
                        Vaše cena::
                        Počet
                        3935340 M170D012Z02A16RD07TL120 M170D012Z02A16RD07TL120 12.0000 .4720 5.0000 .1970 16.0 .63 120.0000 4.724 60.0000 2.362 2.000 3.5000 .1380 2 22.000 26200 Y 0.14
                          Ceníková cena:
                          $216,22 /každý.
                          Vaše cena::
                          Počet
                          3935341 M170D012Z02A16RD07TL140 M170D012Z02A16RD07TL140 12.0000 .4720 5.0000 .1970 16.0 .63 140.0000 5.512 80.0000 3.150 1.500 3.5000 .1380 2 22.000 26200 Y 0.16
                            Ceníková cena:
                            $235,28 /každý.
                            Vaše cena::
                            Počet
                            Ceníková cena:
                            Sleva: %
                            Vaše cena::
                            Výměna Tato položka není k dispozici
                            Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                            Počet

                            Prodáváno v baleních z

                            PŮVODNÍ PRODUKT

                            Kopírovací frézy • Řada M170™

                            Nástrčné frézy • RD12T3..
                            (7 Products)
                            • Milling - Side and FaceMilling - Side and Face
                            • 3D Profiling3D Profiling
                            • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                            • Slotting: Square EndSlotting: Square End
                            • Face MillingFace Milling
                            • Ramping: BlankRamping: Blank
                            • PocketingPocketing
                            • Helical MillingHelical Milling
                            • Milling - Through CoolantMilling - Through Coolant
                            Informace o produktech
                            SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                            3930968 M170D040Z04RD12 M170D040Z04RD12 40.0000 1.575 28.0000 1.102 16.0 .6299 37.0000 1.457 40.0000 1.575 6.0000 .2360 4 9.300 7000 Y 0.22
                              Ceníková cena:
                              $343,40 /každý.
                              Vaše cena::
                              Počet
                              3930970 M170D050Z05RD12 M170D050Z05RD12 50.0000 1.969 38.0000 1.496 22.0 .8661 44.0000 1.732 40.0000 1.575 6.0000 .2360 5 6.100 7950 Y 0.32
                                Ceníková cena:
                                $369,23 /každý.
                                Vaše cena::
                                Počet
                                3930972 M170D052Z05RD12 M170D052Z05RD12 52.0000 2.047 40.0000 1.575 22.0 .8661 44.0000 1.732 50.0000 1.969 6.0000 .2360 5 4.500 7600 Y 0.44
                                  Ceníková cena:
                                  $369,23 /každý.
                                  Vaše cena::
                                  Počet
                                  3930975 M170D063Z06RD12 M170D063Z06RD12 63.0000 2.480 51.0000 2.008 22.0 .8661 44.0000 1.732 40.0000 1.575 6.0000 .2360 6 4.500 6300 Y 0.45
                                    Ceníková cena:
                                    $432,42 /každý.
                                    Vaše cena::
                                    Počet
                                    3930976 M170D066Z06RD12 M170D066Z06RD12 66.0000 2.598 54.0000 2.126 27.0 1.063 60.0000 2.362 50.0000 1.969 6.0000 .2360 6 4.500 6030 Y 0.81
                                      Ceníková cena:
                                      $432,42 /každý.
                                      Vaše cena::
                                      Počet
                                      3930981 M170D100Z08RD12 M170D100Z08RD12 100.0000 3.937 88.0000 3.465 32.0 1.259 80.0000 3.150 55.0000 2.165 6.0000 .2360 8 2.200 3900 Y 1.95
                                        Ceníková cena:
                                        $720,24 /každý.
                                        Vaše cena::
                                        Počet
                                        Ceníková cena:
                                        Sleva: %
                                        Vaše cena::
                                        Výměna Tato položka není k dispozici
                                        Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                                        Počet

                                        Prodáváno v baleních z

                                        PŮVODNÍ PRODUKT

                                        Kopírovací frézy • Řada M170™

                                        Nástrčné frézy • RD1003..
                                        (4 Products)
                                        • Milling - Side and FaceMilling - Side and Face
                                        • 3D Profiling3D Profiling
                                        • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                                        • Slotting: Square EndSlotting: Square End
                                        • Face MillingFace Milling
                                        • Ramping: BlankRamping: Blank
                                        • PocketingPocketing
                                        • Helical MillingHelical Milling
                                        • Milling - Through CoolantMilling - Through Coolant
                                        Informace o produktech
                                        SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                                        3940712 M170D040Z05RD10 M170D040Z05RD10 40.0000 1.575 30.0000 1.181 16.0 .6299 37.0000 1.457 40.0000 1.575 5.0000 .1970 5 7.200 9950 Y 0.28
                                          Ceníková cena:
                                          $369,23 /každý.
                                          Vaše cena::
                                          Počet
                                          3940723 M170D042Z05RD10 M170D042Z05RD10 42.0000 1.654 32.0000 1.260 16.0 .6299 37.0000 1.457 40.0000 1.575 5.0000 .1970 5 5.800 9500 Y 0.28
                                            Ceníková cena:
                                            $369,23 /každý.
                                            Vaše cena::
                                            Počet
                                            3940724 M170D050Z06RD10 M170D050Z06RD10 50.0000 1.969 40.0000 1.575 22.0 .8661 44.0000 1.732 40.0000 1.575 5.0000 .1970 6 5.200 7950 Y 0.35
                                              Ceníková cena:
                                              $474,77 /každý.
                                              Vaše cena::
                                              Počet
                                              3940725 M170D052Z06RD10 M170D052Z06RD10 52.0000 2.047 42.0000 1.654 22.0 .8661 44.0000 1.732 50.0000 1.969 5.0000 .1970 6 3.000 7650 Y 0.51
                                                Ceníková cena:
                                                $474,77 /každý.
                                                Vaše cena::
                                                Počet
                                                Ceníková cena:
                                                Sleva: %
                                                Vaše cena::
                                                Výměna Tato položka není k dispozici
                                                Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                                                Počet

                                                Prodáváno v baleních z

                                                PŮVODNÍ PRODUKT

                                                Kopírovací frézy • Řada M170™

                                                Válcová stopka • RD0702..
                                                (6 Products)
                                                • Shank - Cylindrical  PlainShank - Cylindrical Plain
                                                • 3D Profiling3D Profiling
                                                • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                                                • Slotting: Square EndSlotting: Square End
                                                • Face MillingFace Milling
                                                • Ramping: BlankRamping: Blank
                                                • PocketingPocketing
                                                • Helical MillingHelical Milling
                                                • Milling - Through CoolantMilling - Through Coolant
                                                Informace o produktech
                                                SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length Half Taper Clearance Angle [BHTCA] [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                                                3929404 M170D015Z02A16RD07L110 M170D015Z02A16RD07L110 15.0000 .5910 8.0000 .3170 16.0 .6299 110.0000 4.331 60.0000 2.362 0.500 3.5000 .1380 2 18.000 21200 Y 0.14
                                                  Ceníková cena:
                                                  $228,94 /každý.
                                                  Vaše cena::
                                                  Počet
                                                  3929405 M170D015Z02A16RD07L150 M170D015Z02A16RD07L150 15.0000 .5910 8.0000 .3170 16.0 .6299 150.0000 5.906 60.0000 2.362 0.500 3.5000 .1380 2 18.000 21200 Y 0.20
                                                    Ceníková cena:
                                                    $241,65 /každý.
                                                    Vaše cena::
                                                    Počet
                                                    3929407 M170D016Z02A16RD07L150 M170D016Z02A16RD07L150 16.0000 .6300 9.0000 .3540 16.0 .6299 150.0000 5.906 30.0000 1.181   3.5000 .1380 2 9.000 21200 Y 0.21
                                                      Ceníková cena:
                                                      $241,65 /každý.
                                                      Vaše cena::
                                                      Počet
                                                      3929406 M170D016Z03A16RD07L110 M170D016Z03A16RD07L110 16.0000 .6300 9.0000 .3540 16.0 .6299 110.0000 4.331 20.0000 .7870   3.5000 .1380 3 9.000 21200 Y 0.16
                                                        Ceníková cena:
                                                        $256,67 /každý.
                                                        Vaše cena::
                                                        Počet
                                                        3929409 M170D020Z03A20RD07L140 M170D020Z03A20RD07L140 20.0000 .7870 13.0000 .5130 20.0 .7874 140.0000 5.512 40.0000 1.575   3.5000 .1380 3 12.000 10600 Y 0.29
                                                          Ceníková cena:
                                                          $260,72 /každý.
                                                          Vaše cena::
                                                          Počet
                                                          3929408 M170D020Z04A20RD07L115 M170D020Z04A20RD07L115 20.0000 .7870 13.0000 .5130 20.0 .7874 115.0000 4.528 30.0000 1.181   3.5000 .1380 4 12.000 10600 Y 0.25
                                                            Ceníková cena:
                                                            $260,72 /každý.
                                                            Vaše cena::
                                                            Počet
                                                            Ceníková cena:
                                                            Sleva: %
                                                            Vaše cena::
                                                            Výměna Tato položka není k dispozici
                                                            Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                                                            Počet

                                                            Prodáváno v baleních z

                                                            PŮVODNÍ PRODUKT

                                                            Kopírovací frézy • Řada M170™

                                                            Válcová stopka • RD1003..
                                                            (6 Products)
                                                            • Shank - Cylindrical  PlainShank - Cylindrical Plain
                                                            • 3D Profiling3D Profiling
                                                            • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                                                            • Slotting: Square EndSlotting: Square End
                                                            • Face MillingFace Milling
                                                            • Ramping: BlankRamping: Blank
                                                            • PocketingPocketing
                                                            • Helical MillingHelical Milling
                                                            • Milling - Through CoolantMilling - Through Coolant
                                                            Informace o produktech
                                                            SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length Half Taper Clearance Angle [BHTCA] [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                                                            3940704 M170D020Z02A20RD10L140 M170D020Z02A20RD10L140 20.0000 .7870 10.0000 .3940 20.0 .7874 140.0000 5.512