VXF™-07 Series

Vybrat filtry
Filters
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (22)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (21)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (22)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (22)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (22)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (22)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (22)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (22)
  • M Stainless Steel (22)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (22)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (22)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (22)
  • K Cast Iron (21)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (21)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (21)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (21)
  • N Non-Ferrous Materials (20)
    • N1
      Wrought Aluminum
      (20)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (20)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (20)
  • S High-Temp Alloys (22)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (22)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (22)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (22)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (22)
  • H Hardened Materials (21)
    • H1
      Hardened Materials 44-48 HRC
      (21)
Select All Star
  • CN (8)
  • DE (8)
  • GB (4)
  • IN (5)
  • SG (4)
  • US (3)
Applications
Applications
  • Face Milling Face Milling (9)
  • Pocket Pocket (9)
  • Pocket Helical Pocket Helical (9)
  • Pocket Plunge Milling Pocket Plunge Milling (9)
  • Profile Milling Profile Milling (9)
  • Ramping Ramping (9)
  • Shoulder Roughing Shoulder Roughing (9)
  • Shoulder Square End Shoulder Square End (9)
  • Slot Square End Slot Square End (9)
Cutting Diameter
Cutting Diameter
  • 0.272 in (1)
  • 0.277 in (2)
  • 0.352 in (1)
  • 0.384 in (2)
  • 0.421 in (2)
  • 0.616 in (2)
  • 0.632 in (2)
  • 0.879 in (2)
  • 0.889 in (1)
  • 1.129 in (1)
  • 1.204 in (1)
  • 1.597 in (1)
  • 1.629 in (1)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 6.9 mm (1)
  • 7.025 mm (2)
  • 8.951 mm (1)
  • 9.75 mm (2)
  • 10.701 mm (2)
  • 15.65 mm (2)
  • 16.05 mm (2)
  • 22.326 mm (2)
  • 22.576 mm (1)
  • 28.675 mm (1)
  • 30.576 mm (1)
  • 40.575 mm (1)
  • 41.375 mm (1)
Cutting Diameter Min komu Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 15.875 mm (1)
  • 16.0 mm (2)
  • 18.0 mm (1)
  • 19.05 mm (2)
  • 20.0 mm (2)
  • 25.0 mm (2)
  • 25.401 mm (2)
  • 31.75 mm (2)
  • 32.0 mm (1)
  • 38.1 mm (1)
  • 40.0 mm (1)
  • 50.0 mm (1)
  • 50.801 mm (1)
Maximum Cutting Diameter Min komu Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.625 in (1)
  • 0.63 in (2)
  • 0.709 in (1)
  • 0.75 in (2)
  • 0.787 in (2)
  • 0.984 in (2)
  • 1.0 in (2)
  • 1.25 in (2)
  • 1.26 in (1)
  • 1.5 in (1)
  • 1.575 in (1)
  • 1.969 in (1)
  • 2.0 in (1)
Maximum Cutting Diameter Min komu Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.9 mm (19)
Cutting Length Min komu Cutting Length Max
Cutting Length
Cutting Length
  • 0.035 in (19)
Cutting Length Min komu Cutting Length Max
Reach
Reach
  • 0.984 in (3)
  • 1.26 in (3)
  • 1.379 in (4)
  • 1.575 in (3)
  • 1.693 in (2)
  • 2.5 in (1)
  • 3.0 in (1)
  • 3.5 in (2)
Reach Min komu Reach Max
Reach
Reach
  • 25.0 mm (3)
  • 32.0 mm (3)
  • 35.0 mm (4)
  • 40.0 mm (3)
  • 43.0 mm (2)
  • 63.5 mm (1)
  • 76.2 mm (1)
  • 88.9 mm (2)
Reach Min komu Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 10.0 (8)
  • 11.0 (4)
  • 79.0 (2)
  • 80.0 (5)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (4)
  • Screw-On Connection (7)
  • Straight-Cylindrical (8)
Number of Flutes
Number of Flutes
  • 2 (4)
  • 3 (4)
  • 4 (4)
  • 5 (5)
  • 7 (2)
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.031 in (21)
  • 0.039 in (21)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.8 mm (21)
  • 1.0 mm (21)
Corner Radius Min komu Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WP25PM (20)
  • WP40PM (20)
  • WS40PM (20)
  • WU10PM (20)
Hand Of Tool
Hand Of Tool
  • R (19)
Wiper Insert
Wiper Insert
  • N (4)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.7 (2)
  • 1.0 (2)
  • 1.4 (1)
  • 2.2 (3)
  • 2.69 (2)
  • 3.4 (2)
  • 4.34 (1)
  • 5.4 (1)
  • 5.9 (2)
  • 6.74 (2)
  • 8.2 (1)
Maximum Ramp Angle Min komu Maximum Ramp Angle Max
frontEnd
Neck Diameter
Neck Diameter
  • 0.335 in (1)
  • 0.414 in (1)
  • 0.492 in (1)
  • 0.511 in (1)
  • 0.531 in (1)
  • 0.61 in (1)
  • 0.652 in (1)
  • 0.669 in (1)
  • 0.69 in (1)
  • 0.886 in (2)
  • 1.153 in (1)
Neck Diameter Min komu Neck Diameter Max
Neck Diameter
Neck Diameter
  • 8.5 mm (1)
  • 10.5 mm (1)
  • 12.5 mm (1)
  • 12.976 mm (1)
  • 13.5 mm (1)
  • 15.5 mm (1)
  • 16.55 mm (1)
  • 17.0 mm (1)
  • 17.5 mm (1)
  • 22.5 mm (2)
  • 29.25 mm (1)
Neck Diameter Min komu Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • S-SQUARE 90 (4)
Insert IC Size
Insert IC Size
  • 7.301 mm (4)
Insert IC Size Min komu Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.288 in (4)
Insert IC Size Min komu Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 7.301 mm (4)
Cutting Edge Length Min komu Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.288 in (4)
Cutting Edge Length Min komu Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • MH (2)
  • MM (2)
Cutting Tool Material
Cutting Tool Material
  • H W (4)
Tolerance Class
Tolerance Class
  • P (4)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (8)
  • SCREW-ON (7)
  • SHELL MILL (4)
Back-End Diameter
Back-End Diameter
  • 13.0 mm (1)
  • 15.875 mm (1)
  • 16.0 mm (2)
  • 18.0 mm (3)
  • 19.05 mm (3)
  • 20.0 mm (1)
  • 21.0 mm (2)
  • 22.0 mm (1)
  • 25.0 mm (1)
  • 25.401 mm (1)
  • 29.0 mm (2)
  • 31.75 mm (1)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.512 in (1)
  • 0.625 in (1)
  • 0.63 in (2)
  • 0.709 in (3)
  • 0.75 in (3)
  • 0.787 in (1)
  • 0.828 in (2)
  • 0.866 in (1)
  • 0.984 in (1)
  • 1.0 in (1)
  • 1.143 in (2)
  • 1.25 in (1)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""
Informace o produktech
Metrické
Palcové

PŮVODNÍ PRODUKT

  • PocketingPocketing
  • 100018357100018357
  • Helical MillingHelical Milling
  • Ramping: BlankRamping: Blank
  • Shank - Screw-OnShank - Screw-On
  • Inclined Square End MillInclined Square End Mill
  • Plunge MillingPlunge Milling
  • Counter BoringCounter Boring
  • Spiral CircularSpiral Circular
Informace o produktech
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [G3X] Connection Thread Size External [L2] Head Length [L2] Head Length [WF] Width of Flat [WF] Width of Flat [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
6597130 VXF016Z02M08XP07 VXF016Z02M08XP07   16.0000 .6299 7.0140 .2762 13.0 .5118 8.4900 .3343 M8 25.0000 .9843 9.8900 .3894 0.9000 .0354 2 5.900 65000 Y 0.02
    Ceníková cena:
    $227.23 /každý
    Vaše cena::
    Počet
    6597151 VXF020Z03M10XP07 VXF020Z03M10XP07   20.0000 .7874 10.6990 .4212 18.0 .7087 10.4880 .4129 M10 35.0000 1.378 14.9500 .5886 0.9000 .0354 3 3.400 57000 Y 0.07
      Ceníková cena:
      $288.75 /každý
      Vaše cena::
      Počet
      6597152 VXF025Z04M12XP07 VXF025Z04M12XP07   25.0000 .9843 15.6390 .6157 21.0 .8268 12.4880 .4917 M12 35.0000 1.378 16.9500 .6673 0.9000 .0354 4 2.200 49000 Y 0.09
        Ceníková cena:
        $328.10 /každý
        Vaše cena::
        Počet
        6597153 VXF032Z05M16XP07 VXF032Z05M16XP07   32.0000 1.259 22.5770 .8889 29.0 1.141 16.9880 .6688 M16 43.0000 1.693 23.9500 .9429 0.9000 .0354 5 1.400 41500 Y 0.22
          Ceníková cena:
          $367.46 /každý
          Vaše cena::
          Počet
          Ceníková cena:
          Sleva: %
          Vaše cena::
          Výměna Tato položka není k dispozici
          Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
          Počet

          Prodáváno v baleních z

          PŮVODNÍ PRODUKT

          • PocketingPocketing
          • 100018357100018357
          • Helical MillingHelical Milling
          • Ramping: BlankRamping: Blank
          • Shank - Cylindrical  PlainShank - Cylindrical Plain
          • Plunge MillingPlunge Milling
          • Counter BoringCounter Boring
          • Spiral CircularSpiral Circular
          • Inclined Square End MillInclined Square End Mill
          Informace o produktech
          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
          6597154 VXF016Z02A16XP07L180 VXF016Z02A16XP07L180   16.0000 .6299 7.0150 .2762 16.0 .6299 180.0000 7.086 25.0000 .9843 0.9000 .0354 2 5.900 65000 Y 0.24
            Ceníková cena:
            $281.00 /každý
            Vaše cena::
            Počet
            6597155 VXF018Z02A18XP07L180 VXF018Z02A18XP07L180   18.0000 .7087 8.9520 .3524 18.0 .7087 180.0000 7.086 25.0000 .9843 0.9000 .0354 2 5.400 61000 Y 0.31
              Ceníková cena:
              $281.00 /každý
              Vaše cena::
              Počet
              6597156 VXF020Z03A20XP07L190 VXF020Z03A20XP07L190   20.0000 .7874 10.6990 .4212 20.0 .7874 190.0000 7.480 32.0000 1.259 0.9000 .0354 3 3.400 57000 Y 0.41
                Ceníková cena:
                $356.93 /každý
                Vaše cena::
                Počet
                6597157 VXF025Z04A25XP07L200 VXF025Z04A25XP07L200   25.0000 .9843 15.6390 .6157 25.0 .9843 200.0000 7.874 40.0000 1.574 0.9000 .0354 4 2.200 49000 Y 0.69
                  Ceníková cena:
                  $405.15 /každý
                  Vaše cena::
                  Počet
                  Ceníková cena:
                  Sleva: %
                  Vaše cena::
                  Výměna Tato položka není k dispozici
                  Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                  Počet

                  Prodáváno v baleních z

                  PŮVODNÍ PRODUKT

                  • Counter BoringCounter Boring
                  • Spiral CircularSpiral Circular
                  • PocketingPocketing
                  • 100018357100018357
                  • Helical MillingHelical Milling
                  • Plunge MillingPlunge Milling
                  • Ramping: BlankRamping: Blank
                  • Inclined Square End MillInclined Square End Mill
                  • Shank - Cylindrical  PlainShank - Cylindrical Plain
                  Informace o produktech
                  SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                  6712971 VXF062Z02C062XP07L700 VXF062Z02C062XP07L700   15.8750 .6250 6.8950 .2714 15.875 .625 177.8000 7.000 63.5000 2.500 0.9000 .0354 2 8.200 65000 Y 0.51
                    Ceníková cena:
                    $281.00 /každý
                    Vaše cena::
                    Počet
                    6712972 VXF075Z03C075XP07L750 VXF075Z03C075XP07L750   19.0500 .7500 9.7570 .3841 19.05 .75 190.5000 7.500 76.2000 3.000 0.9000 .0354 3 6.740 57000 Y 0.51
                      Ceníková cena:
                      $281.00 /každý
                      Vaše cena::
                      Počet
                      6712973 VXF100Z04C100XP07L800 VXF100Z04C100XP07L800   25.4000 1.000 16.0380 .6314 25.4 1.0 203.2000 8.000 88.9000 3.500 0.9000 .0354 4 2.200 49000 Y 1.56
                        Ceníková cena:
                        $356.93 /každý
                        Vaše cena::
                        Počet
                        6712974 VXF125Z05C125XP07L800 VXF125Z05C125XP07L800   31.7500 1.250 22.3280 .8791 31.75 1.25 203.2000 8.000 88.9000 3.500 0.9000 .0354 5 2.690 41500 Y 2.47
                          Ceníková cena:
                          $453.91 /každý
                          Vaše cena::
                          Počet
                          Ceníková cena:
                          Sleva: %
                          Vaše cena::
                          Výměna Tato položka není k dispozici
                          Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                          Počet

                          Prodáváno v baleních z

                          PŮVODNÍ PRODUKT

                          Břitové destičky • XPPT-MM • Nejvhodnější pro kapsování a kopírování
                          (2 Products)
                          Informace o produktech
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [D] Insert IC Size [D] Insert IC Size [Rε] Corner Radius [Rε] Corner Radius
                          6595819 XPPT070308ERMM XPPT070308ERMM WP25PM   4 7.3040 .2880 3.1740 .1250 7.3040 .2880 0.8000 .0310
                            Ceníková cena:
                            $14.65 /každý
                            Vaše cena::
                            Počet
                            6595820 XPPT070308ERMM XPPT070308ERMM WS40PM   4 7.3040 .2880 3.1740 .1250 7.3040 .2880 0.8000 .0310
                              Ceníková cena:
                              $14.92 /každý
                              Vaše cena::
                              Počet
                              Ceníková cena:
                              Sleva: %
                              Vaše cena::
                              Výměna Tato položka není k dispozici
                              Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                              Počet

                              Prodáváno v baleních z

                              PŮVODNÍ PRODUKT

                              Břitové destičky • XPPW-MH • Speciální geometrie pro těžké hrubování
                              (2 Products)
                              Informace o produktech
                              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [D] Insert IC Size [D] Insert IC Size [Rε] Corner Radius [Rε] Corner Radius
                              6595770 XPPW070310SRMH XPPW070310SRMH WP40PM   4 7.3040 .2875 3.1740 .1250 7.3040 .2875 1.0000 .0393
                                Ceníková cena:
                                $14.65 /každý
                                Vaše cena::
                                Počet
                                6595769 XPPW070310SRMH XPPW070310SRMH WU10PM   4 7.3040 .2875 3.1740 .1250 7.3040 .2875 1.0000 .0393
                                  Ceníková cena:
                                  $14.65 /každý
                                  Vaše cena::
                                  Počet
                                  Ceníková cena:
                                  Sleva: %
                                  Vaše cena::
                                  Výměna Tato položka není k dispozici
                                  Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                                  Počet

                                  Prodáváno v baleních z

                                  PŮVODNÍ PRODUKT

                                  • PocketingPocketing
                                  • 100018357100018357
                                  • Helical MillingHelical Milling
                                  • Ramping: BlankRamping: Blank
                                  • Milling - Side and FaceMilling - Side and Face
                                  • Counter BoringCounter Boring
                                  • Spiral CircularSpiral Circular
                                  • Plunge MillingPlunge Milling
                                  • Inclined Square End MillInclined Square End Mill
                                  Informace o produktech
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                                  6597158 VXF040Z05S16XP07 VXF040Z05S16XP07 40.0000 1.574 30.5730 1.203 16.0 .6299 37.0000 1.456 32.0000 1.259 0.9000 .0354 5 1.000 35000 Y 0.19
                                    Ceníková cena:
                                    $423.43 /každý
                                    Vaše cena::
                                    Počet
                                    6597159 VXF050Z07S22XP07 VXF050Z07S22XP07 50.0000 1.968 40.5700 1.597 22.0 .8661 42.0000 1.653 40.0000 1.574 0.9000 .0355 7 0.700 31300 Y 0.32
                                      Ceníková cena:
                                      $528.18 /každý
                                      Vaše cena::
                                      Počet
                                      Ceníková cena:
                                      Sleva: %
                                      Vaše cena::
                                      Výměna Tato položka není k dispozici
                                      Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                                      Počet

                                      Prodáváno v baleních z

                                      PŮVODNÍ PRODUKT

                                      • Counter BoringCounter Boring
                                      • Spiral CircularSpiral Circular
                                      • PocketingPocketing
                                      • 100018357100018357
                                      • Helical MillingHelical Milling
                                      • Plunge MillingPlunge Milling
                                      • Ramping: BlankRamping: Blank
                                      • Inclined Square End MillInclined Square End Mill
                                      • Milling - Side and FaceMilling - Side and Face
                                      Informace o produktech
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                                      6712975 VXF150Z05S075XP07 VXF150Z05S075XP07 38.1000 1.500 28.6740 1.128 19.05 .75 36.0000 1.417 32.0000 1.259 0.9000 .0354 5 1.000 35800 Y 0.33
                                        Ceníková cena:
                                        $423.43 /každý
                                        Vaše cena::
                                        Počet
                                        6712976 VXF200Z07S075XP07 VXF200Z07S075XP07 50.8000 2.000 41.3700 1.628 19.05 .75 42.0000 1.653 40.0060 1.575 0.9000 .0354 7 0.700 31000 Y 0.80
                                          Ceníková cena:
                                          $528.18 /každý
                                          Vaše cena::
                                          Počet
                                          Ceníková cena:
                                          Sleva: %
                                          Vaše cena::
                                          Výměna Tato položka není k dispozici
                                          Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                                          Počet

                                          Prodáváno v baleních z

                                          PŮVODNÍ PRODUKT

                                          • Counter BoringCounter Boring
                                          • Spiral CircularSpiral Circular
                                          • PocketingPocketing
                                          • 100018357100018357
                                          • Helical MillingHelical Milling
                                          • Plunge MillingPlunge Milling
                                          • Ramping: BlankRamping: Blank
                                          • Inclined Square End MillInclined Square End Mill
                                          • Shank - Screw-OnShank - Screw-On
                                          Informace o produktech
                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [G3X] Connection Thread Size External [L2] Head Length [L2] Head Length [WF] Width of Flat [WF] Width of Flat [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                                          6712878 VXF075Z03M10XP07 VXF075Z03M10XP07 19.0500 .7500 9.7570 .3841 18.0 .7087 10.4880 .4129 M10 35.0000 1.377 14.9500 .5886 0.9000 .0354 3 6.740 57000 Y 0.13
                                            Ceníková cena:
                                            $288.75 /každý
                                            Vaše cena::
                                            Počet
                                            6712879 VXF100Z04M12XP07 VXF100Z04M12XP07 25.4000 1.000 16.0380 .6314 21.0 .8268 12.4880 .4917 M12 35.0000 1.377 16.9500 .6673 0.9000 .0354 4 4.340 49000 Y 0.21
                                              Ceníková cena:
                                              $328.10 /každý
                                              Vaše cena::
                                              Počet
                                              6712880 VXF125Z05M16XP07 VXF125Z05M16XP07 31.7500 1.250 22.3270 .8790 29.0 1.141 16.9880 .6688 M16 43.0000 1.692 23.9500 .9429 0.9000 .0354 5 2.690 41500 Y 0.48
                                                Ceníková cena:
                                                $367.46 /každý
                                                Vaše cena::
                                                Počet
                                                Ceníková cena:
                                                Sleva: %
                                                Vaše cena::
                                                Výměna Tato položka není k dispozici
                                                Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                                                Počet

                                                Prodáváno v baleních z