36310
Face Milling
Slotting: Square End
Side Milling/Shoulder Milling: Ball Nose
3D Profiling
Milling - Through Coolant
Milling - Side and Face
PocketingDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 6009970 |
| ISO katalogové ID | M200D500Z06S150RN85 |
| ANSI katalogové ID | M200D500Z06S150RN85 |
| [D1MAX] Maximum Cutting Diameter | 127 mm |
| [D1MAX] Maximum Cutting Diameter | 5 in |
| [D1] Effective Cutting Diameter | 101.5 mm |
| [D1] Effective Cutting Diameter | 4 in |
| [D] Adapter / Shank / Bore Diameter | 38.11 mm |
| [D] Adapter / Shank / Bore Diameter | 1.5 in |
| [D6] Hub Diameter | 96.84 mm |
| [D6] Hub Diameter | 3.812 in |
| [L] Overall Length | 50.8 mm |
| [L] Overall Length | 2 in |
| [AP1MAX] 1st Maximum Cutting Depth | 12.6 mm |
| [AP1MAX] 1st Maximum Cutting Depth | 0.5 in |
| Number of Inserts | 6 |
| Maximum Ramping Angle | 0.8 |
| Max RPM | 8200 |
| Coolant Supply | Y |
| Weight Pounds | 4.07 |
36310Face MillingSlotting: Square EndSide Milling/Shoulder Milling: Ball Nose3D ProfilingMilling - Through CoolantMilling - Side and FacePocketingVytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Lehké obrábění | Všeobecné použití | Těžké obrábění |
| Programovaný posuv na zub (fz) jako % poměr radiální hloubky řezu (ae) | ||||||||||||||||
| Geometrie břitových destiček | 10% | 20% | 30% | 40% | 50–100% | Geometrie břitových destiček | ||||||||||
| .E..ML | .003 | .009 | .018 | .003 | .007 | .013 | .002 | .006 | .011 | .002 | .005 | .011 | .002 | .005 | .011 | .E..ML |
| .S..MM | .007 | .014 | .029 | .005 | .011 | .021 | .004 | .009 | .019 | .004 | .009 | .017 | .004 | .009 | .017 | .S..MM |
| Programovaný posuv na zub (fz) jako % poměr radiální hloubky řezu (ae) | ||||||||||||||||
| Geometrie břitových destiček | 10% | 20% | 30% | 40% | 50–100% | Geometrie břitových destiček | ||||||||||
| .E..ML | .004 | .010 | .021 | .003 | .008 | .015 | .003 | .007 | .013 | .002 | .006 | .012 | .002 | .006 | .012 | .E..ML |
| .S..MM | .008 | .017 | .034 | .006 | .012 | .025 | .005 | .011 | .022 | .005 | .010 | .020 | .005 | .010 | .020 | .S..MM |
| Programovaný posuv na zub (fz) jako % poměr radiální hloubky řezu (ae) | ||||||||||||||||
| Geometrie břitových destiček | 10% | 20% | 30% | 40% | 50–100% | Geometrie břitových destiček | ||||||||||
| .E..ML | .007 | .018 | .038 | .005 | .014 | .027 | .005 | .012 | .024 | .004 | .011 | .022 | .004 | .011 | .022 | .E..ML |
| .S..MM | .014 | .030 | .063 | .010 | .022 | .045 | .009 | .019 | .039 | .008 | .018 | .036 | .008 | .018 | .035 | .S..MM |
| Programovaný posuv na zub (fz) jako % poměr radiální hloubky řezu (ae) | ||||||||||||||||
| Geometrie břitových destiček | 10% | 20% | 30% | 40% | 50–100% | Geometrie břitových destiček | ||||||||||
| .E..ML | .005 | .013 | .027 | .004 | .010 | .020 | .003 | .009 | .017 | .003 | .008 | .016 | .003 | .008 | .016 | .E..ML |
| .S..MM | .010 | .022 | .045 | .008 | .016 | .033 | .007 | .014 | .028 | .006 | .013 | .026 | .006 | .013 | .026 | .S..MM |
| Materiálová skupina | WK15CM | WP25PM | WU35PM | WP35CM | WP40PM | |||||||||||
| P | 1 | – | – | – | 1295 | 1120 | 1060 | 1025 | 905 | 845 | 1790 | 1555 | 1460 | 1165 | 1025 | 965 |
| 2 | – | – | – | 1080 | 940 | 785 | 865 | 750 | 630 | 1105 | 1000 | 905 | 985 | 845 | 710 | |
| 3 | – | – | – | 1000 | 845 | 690 | 785 | 670 | 550 | 1000 | 905 | 805 | 905 | 770 | 630 | |
| 4 | – | – | – | 890 | 725 | 590 | 710 | 590 | 475 | 750 | 690 | 630 | 805 | 670 | 535 | |
| 5 | – | – | – | 725 | 670 | 590 | 590 | 535 | 475 | 1025 | 905 | 830 | 670 | 610 | 535 | |
| 6 | – | – | – | 650 | 490 | 395 | 510 | 395 | 310 | 630 | 535 | 430 | 590 | 450 | 355 | |
| M | 1 | – | – | – | 805 | 710 | 650 | 670 | 590 | 535 | 805 | 725 | 610 | 770 | 670 | 610 |
| 2 | – | – | – | 725 | 630 | 510 | 610 | 510 | 430 | 725 | 630 | 550 | 690 | 590 | 490 | |
| 3 | – | – | – | 550 | 475 | 370 | 450 | 395 | 310 | 570 | 510 | 450 | 510 | 450 | 355 | |
| K | 1 | 1655 | 1520 | 1340 | 905 | 805 | 725 | – | – | – | 1165 | 1045 | 940 | – | – | – |
| 2 | 1320 | 1165 | 1080 | 710 | 630 | 590 | – | – | – | 925 | 830 | 750 | – | – | – | |
| 3 | 1105 | 985 | 905 | 590 | 535 | 475 | – | – | – | 770 | 690 | 630 | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 155 | 140 | 95 | 140 | 120 | 95 | – | – | – | 155 | 140 | 120 |
| 2 | – | – | – | 155 | 140 | 95 | 140 | 120 | 95 | – | – | – | 155 | 140 | 120 | |
| 3 | – | – | – | 200 | 155 | 95 | 180 | 140 | 95 | – | – | – | 200 | 155 | 120 | |
| 4 | – | – | – | 275 | 200 | 140 | 235 | 180 | 120 | 260 | 200 | 130 | 260 | 200 | 140 | |
| H | 1 | – | – | – | 475 | 355 | 275 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Lehké obrábění | Všeobecné použití | Těžké obrábění | ||||
| Materiálová skupina | Geometrie | Sorta | Geometrie | Sorta | Geometrie | Sorta |
| P1–P2 | .E..ML | WP25PM | .S..MM | WP40PM | .S..MM | WP40PM |
| P3–P4 | .E..ML | WP25PM | .S..MM | WP40PM | .S..MM | WP40PM |
| P5–P6 | .E..ML | WP25PM | .S..MM | WP35CM | .S..MM | WP35CM |
| M1–M2 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| M3 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| K1–K2 | – | – | .S..MM | WK15CM | – | – |
| K3 | – | – | .S..MM | WK15CM | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| S3 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| S4 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| H1 | – | – | .S..MM | WP25PM | – | – |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?