Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Máte otázku týkající se produktu?

Zobrazit úplný seznam globálních servisních odborníků podle specializace.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Zpět k řešení

Úprava řešení

Přidání řešení

Název řešení: {{SolutionName}}

KM32TS™ Internal Cutting Units

Vybrat filtry
Filters
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (22)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (22)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (22)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (22)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (22)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (22)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (22)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (22)
  • M Stainless Steel (22)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (22)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (22)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (22)
  • K Cast Iron (22)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (22)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (22)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (22)
  • N Non-Ferrous Materials (22)
    • N1
      Wrought Aluminum
      (22)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (22)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (22)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (22)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (22)
    • N6
      Carbon, Graphite Composites, CFRP
      (22)
    • N7
      MMC's
      (22)
  • S High-Temp Alloys (22)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (22)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (22)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (22)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (22)
  • H Hardened Materials (22)
    • H1
      Hardened Materials 44-48 HRC
      (22)
    • H2
      Hardened Materials 48-55 HRC
      (19)
    • H3
      Hardened Materials 56-60 HRC
      (18)
    • H4
      Hardened Materials >60 HRC
      (18)
Applications
Applications
  • Facing Facing (18)
  • Grooving Grooving (1)
  • ID Grooving ID Grooving (1)
  • ID Thread Turning ID Thread Turning (5)
  • Multiple Direction Cutting Multiple Direction Cutting (18)
  • Profiling Profiling (17)
  • TRN Boring TRN Boring (17)
  • Threading Threading (5)
  • Turning Turning (18)
Type of Thread
Type of Thread
  • 55 (3)
  • 60 (4)
  • ACME (2)
  • API RD (2)
  • BSPT (3)
  • BSW (3)
  • BUTTRESS (1)
  • M (3)
  • NPT (3)
  • NPTF (3)
  • RD DIN 405 (2)
  • STUB ACME (2)
  • TR DIN 103 (2)
  • UN (4)
  • UNJ (3)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (19)
  • Interrupted (4)
  • Lightly Interrupted Cut (19)
  • Smooth Cut (19)
  • Varying Depth of Cut (19)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (4)
  • 93.0 (6)
  • 95.0 (12)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (19)
  • 2.0 (19)
  • 3.0 (3)
  • 4.0 (13)
  • 8.0 (3)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (2)
  • 0.002 in (3)
  • 0.003 in (3)
  • 0.004 in (20)
  • 0.006 in (2)
  • 0.008 in (21)
  • 0.01 in (1)
  • 0.016 in (18)
  • 0.02 in (1)
  • 0.028 in (1)
  • 0.03 in (1)
  • 0.031 in (19)
  • 0.037 in (1)
  • 0.039 in (1)
  • 0.047 in (12)
  • 0.049 in (1)
  • 0.06 in (1)
  • 0.062 in (3)
  • 0.063 in (5)
  • 0.069 in (1)
  • 0.094 in (1)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (2)
  • 0.05 mm (3)
  • 0.076 mm (3)
  • 0.1 mm (20)
  • 0.151 mm (2)
  • 0.2 mm (21)
  • 0.225 mm (1)
  • 0.4 mm (18)
  • 0.5 mm (1)
  • 0.701 mm (1)
  • 0.75 mm (1)
  • 0.775 mm (1)
  • 0.8 mm (18)
  • 0.925 mm (1)
  • 1.0 mm (1)
  • 1.201 mm (12)
  • 1.25 mm (1)
  • 1.5 mm (1)
  • 1.576 mm (3)
  • 1.6 mm (5)
  • 1.75 mm (1)
  • 2.375 mm (1)
Corner Radius Min komu Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (4)
  • 241 (3)
  • CG5 (5)
  • CL4 (3)
  • CM1 (5)
  • CM2 (4)
  • CM3 (3)
  • CM4 (3)
  • CPX (4)
  • CW2 (3)
  • CW2015 (4)
  • CW5025 (4)
  • GX (3)
  • HCK20 (1)
  • HCM15 (1)
  • HK1500 (3)
  • HT2 (3)
  • HTX (3)
  • K00331 (1)
  • K060 (4)
  • K090 (4)
  • K1 (3)
  • K10M (4)
  • K10P (4)
  • K10U (4)
  • K15 (3)
  • K15U (4)
  • K20K (4)
  • K21 (3)
  • K25M (4)
  • K25P (4)
  • K2885 (1)
  • K313 (19)
  • K35P (1)
  • K420 (5)
  • K45 (4)
  • K4H (1)
  • K68 (21)
  • KB1340 (3)
  • KB1345 (6)
  • KB1610 (15)
  • KB1625 (6)
  • KB1630 (11)
  • KB5610 (13)
  • KB5625 (9)
  • KB5630 (9)
  • KB9610 (14)
  • KB9640 (3)
  • KBH10 (4)
  • KBH10B (4)
  • KBH20 (4)
  • KBH20B (4)
  • KBK35 (3)
  • KC210 (4)
  • KC250 (9)
  • KC5010 (21)
  • KC5025 (22)
  • KC5410 (19)
  • KC5510 (4)
  • KC5525 (4)
  • KC710 (9)
  • KC720 (22)
  • KC722 (6)
  • KC730 (22)
  • KC7310 (8)
  • KC732 (18)
  • KC8050 (18)
  • KC810 (19)
  • KC850 (19)
  • KC9010 (15)
  • KC9025 (18)
  • KC910 (19)
  • KC9105 (15)
  • KC9110 (19)
  • KC9120 (15)
  • KC9125 (18)
  • KC9140 (4)
  • KC9145 (4)
  • KC9215 (4)
  • KC9225 (18)
  • KC9240 (18)
  • KC9240NEW (18)
  • KC9245 (4)
  • KC9315 (18)
  • KC9320 (16)
  • KC9325 (15)
  • KC935 (19)
  • KC950 (16)
  • KC990 (18)
  • KCD25 (15)
  • KCK05 (18)
  • KCK05B (6)
  • KCK15 (15)
  • KCK15B (15)
  • KCK20 (19)
  • KCK20B (19)
  • KCM15 (18)
  • KCM15B (13)
  • KCM25 (18)
  • KCM25B (15)
  • KCM35 (11)
  • KCM35B (3)
  • KCP05 (18)
  • KCP05B (4)
  • KCP10 (18)
  • KCP10B (19)
  • KCP25 (18)
  • KCP25B (19)
  • KCP25C (18)
  • KCP30 (18)
  • KCP30B (4)
  • KCP40 (4)
  • KCP40B (4)
  • KCPK05 (8)
  • KCS10 (17)
  • KCS10B (18)
  • KCU10 (19)
  • KCU10B (13)
  • KCU25 (19)
  • KD050 (15)
  • KD081 (4)
  • KD100 (18)
  • KD105 (9)
  • KD120 (15)
  • KD1400 (18)
  • KD1405 (18)
  • KD1425 (18)
  • KM1 (3)
  • KMF (3)
  • KS15 (3)
  • KT1120 (3)
  • KT125 (8)
  • KT150 (8)
  • KT175 (19)
  • KT315 (19)
  • KT325 (3)
  • KTP10 (15)
  • KU10 (9)
  • KU10T (19)
  • KU25T (3)
  • KU30T (16)
  • KY1310 (4)
  • KY1320 (4)
  • KY1540 (4)
  • KY1615 (4)
  • KY2000 (4)
  • KY2100 (4)
  • KY3000 (4)
  • KY3400 (4)
  • KY3500 (4)
  • KY4000 (3)
  • KY4300 (4)
  • KY4400 (4)
  • KYHK15B (4)
  • KYK10 (4)
  • KYK25 (4)
  • KYK35 (4)
  • KYS25 (4)
  • KYS30 (4)
  • NL200 (3)
  • NL250 (4)
  • NL300 (3)
  • NL400 (3)
  • NL920 (4)
  • P25 (5)
  • PB100 (3)
  • PB170 (3)
  • PB250 (3)
  • PB300 (3)
  • PS5 (3)
  • SP0819 (3)
  • SP3019 (3)
  • SP4019 (4)
  • SP4066 (1)
  • THM (4)
  • THM-X (3)
  • THMF-X (3)
  • TN10P (5)
  • TN10U (4)
  • TN15M (4)
  • TN15U (4)
  • TN2000 (3)
  • TN20K (4)
  • TN20P (4)
  • TN30M (4)
  • TN30P (4)
  • TN4000 (3)
  • TN5015 (4)
  • TN5020 (3)
  • TN5105 (4)
  • TN5120 (4)
  • TN6010 (5)
  • TN6025 (7)
  • TN7005 (4)
  • TN7010 (4)
  • TN7015 (4)
  • TN7025 (4)
  • TN7035 (3)
  • TN7105 (3)
  • TN7110 (5)
  • TN7115 (4)
  • TN7125 (3)
  • TN7135 (3)
  • TN8025 (4)
  • TTI15 (3)
  • TTR (3)
  • TTS (3)
  • TTX (3)
  • W00162 (4)
  • WBH10C (9)
  • WBH10P (13)
  • WBH10U (13)
  • WBH20P (4)
  • WBH25P (16)
  • WBH25U (4)
  • WBH30P (13)
  • WBK40U (3)
  • WBK45U (4)
  • WDN00U (18)
  • WDN25U (18)
  • WK05CT (4)
  • WK15CT (3)
  • WK20CT (15)
  • WM15CT (16)
  • WM25CT (13)
  • WM35CT (4)
  • WP05CT (3)
  • WP15CT (13)
  • WP25CT (18)
  • WP35CT (4)
  • WS10PT (4)
  • WS25PT (4)
  • WU10HT (4)
  • WU10PT (4)
  • WU25PT (3)
  • X00511 (3)
  • X00580 (3)
  • X00581 (3)
  • X00582 (3)
  • X00583 (3)
  • X00584 (3)
  • X00585 (3)
  • X00586 (3)
  • X00591 (3)
  • X00592 (3)
  • X00593 (3)
  • X00594 (3)
  • X00596 (3)
  • X00597 (3)
  • X00599 (3)
Hand Of Tool
Hand Of Tool
  • L (10)
  • R (12)
Wiper Insert
Wiper Insert
  • N (22)
  • Y (18)
F Dimension
F Dimension
  • 7.0 mm (3)
  • 9.0 mm (3)
  • 11.0 mm (3)
  • 13.0 mm (5)
  • 17.0 mm (8)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.276 in (3)
  • 0.354 in (3)
  • 0.433 in (3)
  • 0.512 in (5)
  • 0.669 in (8)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 13.0 mm (3)
  • 16.0 mm (3)
  • 18.5 mm (1)
  • 20.0 mm (2)
  • 25.0 mm (5)
  • 32.0 mm (8)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.512 in (3)
  • 0.63 in (3)
  • 0.728 in (1)
  • 0.787 in (2)
  • 0.984 in (5)
  • 1.26 in (8)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (1)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (1)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (13)
  • E (5)
  • S (4)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (4)
  • DOUBLE POSITIVE (3)
  • NEGATIVE-ZERO (2)
  • NEUTRAL (ZERO) (7)
  • POSITIVE-ZERO (6)
Maximum Bore Depth
Maximum Bore Depth
  • 1.379 in (3)
  • 1.655 in (2)
  • 1.701 in (2)
  • 2.205 in (2)
  • 2.283 in (4)
  • 2.362 in (6)
  • 2.953 in (3)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 35.0 mm (3)
  • 42.0 mm (2)
  • 43.2 mm (2)
  • 56.0 mm (2)
  • 58.0 mm (4)
  • 60.0 mm (6)
  • 75.0 mm (3)
Maximum Bore Depth Min komu Maximum Bore Depth Max
frontEnd
Clamp Style
Clamp Style
  • M (6)
  • N (1)
  • S (15)
Cutting Width
Cutting Width
  • 0.02 in (1)
  • 0.031 in (1)
  • 0.035 in (1)
  • 0.039 in (1)
  • 0.041 in (1)
  • 0.047 in (1)
  • 0.055 in (1)
  • 0.058 in (1)
  • 0.06 in (1)
  • 0.062 in (1)
  • 0.067 in (1)
  • 0.069 in (1)
  • 0.077 in (1)
  • 0.079 in (1)
  • 0.088 in (1)
  • 0.089 in (1)
  • 0.095 in (1)
  • 0.098 in (1)
  • 0.108 in (1)
  • 0.119 in (1)
  • 0.125 in (1)
  • 0.126 in (1)
  • 0.128 in (1)
  • 0.129 in (1)
  • 0.138 in (1)
  • 0.15 in (1)
  • 0.152 in (1)
Cutting Width Min komu Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (1)
  • 0.775 mm (1)
  • 0.8 mm (1)
  • 0.9 mm (1)
  • 1.0 mm (1)
  • 1.05 mm (1)
  • 1.201 mm (1)
  • 1.401 mm (1)
  • 1.475 mm (1)
  • 1.5 mm (1)
  • 1.576 mm (1)
  • 1.701 mm (1)
  • 1.75 mm (1)
  • 1.951 mm (1)
  • 2.0 mm (1)
  • 2.2 mm (1)
  • 2.225 mm (1)
  • 2.25 mm (1)
  • 2.401 mm (1)
  • 2.5 mm (1)
  • 2.75 mm (1)
  • 3.0 mm (1)
  • 3.176 mm (1)
  • 3.2 mm (1)
  • 3.25 mm (1)
  • 3.276 mm (1)
  • 3.5 mm (1)
  • 3.801 mm (1)
  • 3.85 mm (1)
Cutting Width Min komu Cutting Width Max
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (12)
  • D-DIAMOND/RHOMBIC 55 (6)
  • LT-TRIANGLE LAY DOWN THREAD 60 (3)
  • TN-TOP NOTCH (1)
Insert Size
Insert Size
  • 2 (1)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.119 in (3)
  • 0.125 in (1)
  • 0.177 in (3)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 3.0 mm (3)
  • 3.176 mm (1)
  • 4.5 mm (3)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (15)
  • B L (18)
  • C A (4)
  • C N (4)
  • D P (18)
  • H T (19)
  • H W (22)
backEnd
System Size
System Size
  • KM32 (19)
  • KM32TS (3)
No filters matching ""
Zúžení podle kategorie:
Informace o produktech
Metrické
Palcové

PŮVODNÍ PRODUKT

MCLN 95° - KM32TS Internal Cutting Units (M-Clamping) MCLN 95° - KM32TS Internal Cutting Units (M-Clamping)

(3 Products)
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
Informace o produktech
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
1023841 KM32TSS25EMCLNL12 KM32TSS25EMCLNL12 32.0000 1.260 17.0000 .6690 60.0000 2.362 70.0000 2.756 CNMA120408/CNMA432 0.28 0.61
    Ceníková cena:
    $413.68 /každý
    Vaše cena::
    1023729 KM32TSS25EMCLNR12 KM32TSS25EMCLNR12 32.0000 1.259 17.0000 .6693 58.0000 2.283 70.0000 2.755 CN..120408/CN..432    
      Ceníková cena:
      $413.68 /každý
      Vaše cena::
      1023866 KM32TSS25GMCLNR12 KM32TSS25GMCLNR12 32.0000 1.259 17.0000 .6693 75.0000 2.952 90.0000 3.543 CN..120408/CN..432    
        Ceníková cena:
        $413.68 /každý
        Vaše cena::
        Ceníková cena:
        Sleva: %
        Vaše cena::
        Výměna Tato položka není k dispozici
        Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

        PŮVODNÍ PRODUKT

        SCLP 95° - KM32TS Internal Steel Cutting Units (S-Clamping Inserts) SCLP 95° - KM32TS Internal Steel Cutting Units (S-Clamping Inserts)

        (9 Products)
        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
        Informace o produktech
        SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
        1144615 KM32TSS10CSCLPL06 KM32TSS10CSCLPL06 13.0000 .5118 7.0000 .2756 35.0000 1.378 50.0000 1.968 CP..060204/CP..2151    
          Ceníková cena:
          $387.61 /každý
          Vaše cena::
          1144614 KM32TSS10CSCLPR06 KM32TSS10CSCLPR06 13.0000 .5118 7.0000 .2756 35.0000 1.378 50.0000 1.968 CP..060204/CP..2151    
            Ceníková cena:
            $387.61 /každý
            Vaše cena::
            1144617 KM32TSS12DSCLPL06 KM32TSS12DSCLPL06 16.0000 .6300 9.0000 .3540 43.2100 1.701 60.0000 2.362 CP..060204/CP..2151 0.13 0.29
              Ceníková cena:
              $387.61 /každý
              Vaše cena::
              1144616 KM32TSS12DSCLPR06 KM32TSS12DSCLPR06 16.0000 .6300 9.0000 .3540 43.2100 1.701 60.0000 2.362 CP..060204/CP..2151 0.13 0.29
                Ceníková cena:
                $387.61 /každý
                Vaše cena::