Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Máte otázku týkající se produktu?

Zobrazit úplný seznam globálních servisních odborníků podle specializace.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Zpět k řešení

Úprava řešení

Přidání řešení

Název řešení: {{SolutionName}}

KM80ATC™ Cutting Units

Vybrat filtry
Filters
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (36)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (36)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (36)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (36)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (36)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (36)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (36)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (36)
  • M Stainless Steel (34)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (34)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (34)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (34)
  • K Cast Iron (36)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (36)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (36)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (36)
  • N Non-Ferrous Materials (22)
    • N1
      Wrought Aluminum
      (22)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (22)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (9)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (22)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (22)
    • N6
      Carbon, Graphite Composites, CFRP
      (20)
    • N7
      MMC's
      (22)
  • S High-Temp Alloys (32)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (32)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (32)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (32)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (32)
  • H Hardened Materials (17)
    • H1
      Hardened Materials 44-48 HRC
      (17)
    • H2
      Hardened Materials 48-55 HRC
      (17)
    • H3
      Hardened Materials 56-60 HRC
      (17)
    • H4
      Hardened Materials >60 HRC
      (15)
Applications
Applications
  • Chamfer Turning Chamfer Turning (3)
  • Cut-Off Cut-Off (3)
  • Deep Grooving Deep Grooving (3)
  • Face Grooving Face Grooving (3)
  • Facing Facing (30)
  • Grooving Grooving (7)
  • ID Grooving ID Grooving (4)
  • ID Thread Turning ID Thread Turning (4)
  • Multiple Direction Cutting Multiple Direction Cutting (17)
  • OD Thread Turning OD Thread Turning (7)
  • Plunge Turning Plunge Turning (3)
  • Profiling Profiling (11)
  • TRN Boring TRN Boring (19)
  • Threading Threading (7)
  • Turning Turning (32)
Type of Thread
Type of Thread
  • 60 (7)
  • ACME (7)
  • API (7)
  • API RD (3)
  • BSW (3)
  • BUTTRESS (7)
  • M (3)
  • NPT (3)
  • STUB ACME (3)
  • UN (7)
  • UNJ (3)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (34)
  • Interrupted (11)
  • Lightly Interrupted Cut (34)
  • Smooth Cut (34)
  • Varying Depth of Cut (34)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (2)
  • 75.0 (15)
  • 90.0 (13)
  • 93.0 (2)
  • 95.0 (4)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (29)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (21)
  • 2.0 (20)
  • 4.0 (23)
  • 8.0 (23)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (3)
  • 0.003 in (7)
  • 0.004 in (5)
  • 0.005 in (3)
  • 0.006 in (7)
  • 0.007 in (7)
  • 0.008 in (9)
  • 0.01 in (7)
  • 0.011 in (3)
  • 0.012 in (3)
  • 0.014 in (7)
  • 0.016 in (5)
  • 0.017 in (3)
  • 0.019 in (7)
  • 0.02 in (3)
  • 0.023 in (7)
  • 0.031 in (16)
  • 0.035 in (7)
  • 0.039 in (3)
  • 0.047 in (16)
  • 0.049 in (3)
  • 0.06 in (3)
  • 0.062 in (3)
  • 0.063 in (28)
  • 0.069 in (3)
  • 0.078 in (3)
  • 0.079 in (7)
  • 0.089 in (7)
  • 0.094 in (10)
  • 0.095 in (28)
  • 0.098 in (4)
  • 0.125 in (4)
  • 0.126 in (10)
  • 0.157 in (5)
  • 0.394 in (2)
  • 0.492 in (2)
  • 0.63 in (2)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (3)
  • 0.076 mm (7)
  • 0.1 mm (5)
  • 0.125 mm (3)
  • 0.151 mm (7)
  • 0.176 mm (7)
  • 0.2 mm (9)
  • 0.225 mm (3)
  • 0.25 mm (7)
  • 0.275 mm (3)
  • 0.301 mm (3)
  • 0.325 mm (7)
  • 0.351 mm (7)
  • 0.4 mm (5)
  • 0.426 mm (3)
  • 0.45 mm (7)
  • 0.476 mm (1)
  • 0.5 mm (3)
  • 0.576 mm (7)
  • 0.775 mm (3)
  • 0.8 mm (13)
  • 0.9 mm (7)
  • 1.0 mm (3)
  • 1.201 mm (16)
  • 1.25 mm (3)
  • 1.5 mm (3)
  • 1.576 mm (3)
  • 1.6 mm (28)
  • 1.75 mm (3)
  • 1.975 mm (3)
  • 2.0 mm (7)
  • 2.25 mm (7)
  • 2.375 mm (10)
  • 2.401 mm (28)
  • 2.5 mm (4)
  • 3.176 mm (4)
  • 3.2 mm (10)
  • 4.0 mm (5)
  • 10.0 mm (2)
  • 12.5 mm (2)
  • 16.0 mm (2)
Corner Radius Min komu Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (8)
  • CG4 (2)
  • CL4 (13)
  • CM2 (7)
  • CM3 (13)
  • CM5 (2)
  • CPX (13)
  • CW2015 (8)
  • CW5025 (8)
  • GX (13)
  • HK1500 (6)
  • K090 (13)
  • K1 (16)
  • K10M (13)
  • K10P (8)
  • K10U (2)
  • K15U (2)
  • K20K (13)
  • K21 (11)
  • K25M (2)
  • K25P (13)
  • K2885 (3)
  • K313 (22)
  • K35P (5)
  • K420 (29)
  • K45 (2)
  • K4H (3)
  • K68 (22)
  • KB1345 (7)
  • KB1610 (2)
  • KB1625 (2)
  • KB1630 (9)
  • KB5610 (2)
  • KB5625 (5)
  • KB5630 (2)
  • KB9610 (2)
  • KBH10 (2)
  • KBH10B (2)
  • KBH20 (3)
  • KBH20B (2)
  • KC210 (11)
  • KC250 (14)
  • KC5010 (32)
  • KC5025 (20)
  • KC5410 (20)
  • KC5510 (13)
  • KC710 (7)
  • KC720 (14)
  • KC722 (7)
  • KC730 (22)
  • KC7310 (13)
  • KC732 (5)
  • KC8050 (25)
  • KC810 (20)
  • KC850 (32)
  • KC9010 (15)
  • KC9025 (23)
  • KC910 (16)
  • KC9105 (8)
  • KC9110 (36)
  • KC9120 (26)
  • KC9125 (29)
  • KC9140 (23)
  • KC9145 (23)
  • KC9215 (13)
  • KC9225 (13)
  • KC9240 (27)
  • KC9240NEW (22)
  • KC9245 (13)
  • KC9315 (15)
  • KC9320 (20)
  • KC9325 (13)
  • KC935 (25)
  • KC950 (25)
  • KC990 (18)
  • KCK05 (13)
  • KCK05B (13)
  • KCK15 (13)
  • KCK15B (15)
  • KCK20 (24)
  • KCK20B (27)
  • KCM15 (13)
  • KCM15B (8)
  • KCM25 (20)
  • KCM25B (18)
  • KCM35 (13)
  • KCM35B (11)
  • KCP05 (2)
  • KCP05B (7)
  • KCP10 (29)
  • KCP10B (29)
  • KCP25 (29)
  • KCP25B (34)
  • KCP25C (29)
  • KCP30 (25)
  • KCP30B (21)
  • KCP40 (21)
  • KCP40B (23)
  • KCPK05 (17)
  • KCS10 (2)
  • KCS10B (13)
  • KCU10 (32)
  • KCU10B (13)
  • KCU25 (22)
  • KD050 (3)
  • KD081 (5)
  • KD100 (7)
  • KD120 (9)
  • KD1400 (2)
  • KD1405 (2)
  • KD1425 (5)
  • KM1 (7)
  • KT1120 (2)
  • KT125 (2)
  • KT150 (2)
  • KT175 (5)
  • KT315 (9)
  • KT5020 (2)
  • KU10T (9)
  • KU25T (7)
  • KU30T (20)
  • KY1320 (8)
  • KY1540 (6)
  • KY1615 (10)
  • KY2000 (6)
  • KY3000 (20)
  • KY3400 (11)
  • KY3500 (13)
  • KY4000 (2)
  • KY4300 (6)
  • KY4400 (8)
  • KYHK15B (8)
  • KYK25 (6)
  • KYK35 (13)
  • KYS25 (6)
  • KYS30 (6)
  • MC2 (2)
  • NL250 (13)
  • NL300 (23)
  • NL400 (11)
  • NL920 (9)
  • SP0819 (11)
  • SP3019 (11)
  • SP4019 (6)
  • SP4036 (2)
  • SP4093 (2)
  • SPADAP (21)
  • SPN4W2 (5)
  • THM (14)
  • TN10P (13)
  • TN10U (2)
  • TN15M (13)
  • TN15U (2)
  • TN2000 (11)
  • TN20K (13)
  • TN20P (13)
  • TN30M (13)
  • TN30P (16)
  • TN4000 (11)
  • TN5015 (11)
  • TN5020 (13)
  • TN5120 (11)
  • TN6010 (9)
  • TN6025 (7)
  • TN7010 (13)
  • TN7015 (23)
  • TN7025 (23)
  • TN7035 (13)
  • TN7110 (15)
  • TN7115 (23)
  • TN7125 (23)
  • TN7135 (13)
  • TN8025 (21)
  • TTM09 (5)
  • TTR (2)
  • TTR-X (5)
  • TTS (11)
  • W00342 (5)
  • WBH10C (2)
  • WBH10P (2)
  • WBH10U (2)
  • WBH20P (2)
  • WBH25P (2)
  • WBH30P (2)
  • WDN25U (2)
  • WK05CT (13)
  • WK20CT (15)
  • WM15CT (13)
  • WM25CT (18)
  • WM35CT (13)
  • WP15CT (25)
  • WP25CT (25)
  • WP35CT (25)
  • WS10PT (13)
  • WS25PT (13)
  • WU10HT (9)
  • WU10PT (6)
  • WU25PT (4)
  • YY72VD (2)
Hand Of Tool
Hand Of Tool
  • L (14)
  • N (2)
  • R (13)
Wiper Insert
Wiper Insert
  • N (36)
  • Y (4)
F Dimension
F Dimension
  • 0.0 mm (2)
  • 48.0 mm (8)
  • 53.0 mm (19)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.0 in (2)
  • 1.891 in (8)
  • 2.087 in (19)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (3)
  • 41.301 mm (1)
  • 47.6 mm (1)
  • 57.2 mm (2)
  • 88.9 mm (1)
  • 106.0 mm (19)
  • 139.701 mm (1)
  • 174.601 mm (1)
  • 209.601 mm (2)
  • 222.3 mm (2)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (3)
  • 1.627 in (1)
  • 1.874 in (1)
  • 2.253 in (2)
  • 3.5 in (1)
  • 4.173 in (19)
  • 5.5 in (1)
  • 6.875 in (1)
  • 8.252 in (2)
  • 8.752 in (2)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (7)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (7)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (4)
  • E (11)
  • S (14)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (20)
  • NEGATIVE-ZERO (2)
  • NEUTRAL (ZERO) (7)
Maximum Bore Depth
Maximum Bore Depth
  • 2.757 in (19)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 70.0 mm (19)
Maximum Bore Depth Min komu Maximum Bore Depth Max
frontEnd
Clamp Style
Clamp Style
  • M (23)
  • N (7)
  • P (6)
Cutting Width
Cutting Width
  • 0.039 in (3)
  • 0.047 in (3)
  • 0.06 in (3)
  • 0.062 in (3)
  • 0.069 in (3)
  • 0.073 in (3)
  • 0.078 in (3)
  • 0.079 in (3)
  • 0.088 in (3)
  • 0.089 in (2)
  • 0.094 in (1)
  • 0.095 in (3)
  • 0.097 in (3)
  • 0.098 in (3)
  • 0.105 in (3)
  • 0.108 in (3)
  • 0.11 in (3)
  • 0.119 in (7)
  • 0.122 in (3)
  • 0.125 in (7)
  • 0.126 in (7)
  • 0.128 in (3)
  • 0.131 in (1)
  • 0.138 in (7)
  • 0.143 in (3)
  • 0.156 in (3)
  • 0.157 in (7)
  • 0.167 in (7)
  • 0.169 in (3)
  • 0.177 in (7)
  • 0.178 in (3)
  • 0.185 in (5)
  • 0.188 in (7)
  • 0.189 in (7)
  • 0.192 in (1)
  • 0.193 in (1)
  • 0.195 in (3)
  • 0.197 in (4)
  • 0.202 in (4)
  • 0.213 in (4)
  • 0.217 in (4)
  • 0.219 in (4)
  • 0.237 in (4)
  • 0.25 in (4)
  • 0.255 in (4)
Cutting Width Min komu Cutting Width Max
Cutting Width
Cutting Width
  • 1.0 mm (3)
  • 1.201 mm (3)
  • 1.5 mm (3)
  • 1.576 mm (3)
  • 1.75 mm (3)
  • 1.826 mm (3)
  • 1.975 mm (3)
  • 2.0 mm (3)
  • 2.2 mm (3)
  • 2.225 mm (3)
  • 2.25 mm (2)
  • 2.375 mm (1)
  • 2.401 mm (3)
  • 2.475 mm (3)
  • 2.5 mm (3)
  • 2.676 mm (3)
  • 2.75 mm (3)
  • 2.801 mm (3)
  • 3.0 mm (7)
  • 3.1 mm (3)
  • 3.176 mm (7)
  • 3.2 mm (7)
  • 3.25 mm (3)
  • 3.325 mm (1)
  • 3.5 mm (7)
  • 3.6 mm (3)
  • 3.95 mm (3)
  • 3.975 mm (1)
  • 4.0 mm (7)
  • 4.25 mm (7)
  • 4.3 mm (3)
  • 4.5 mm (7)
  • 4.525 mm (3)
  • 4.7 mm (5)
  • 4.775 mm (7)
  • 4.801 mm (7)
  • 4.875 mm (1)
  • 4.9 mm (1)
  • 4.95 mm (3)
  • 5.0 mm (4)
  • 5.125 mm (4)
  • 5.4 mm (4)
  • 5.5 mm (4)
  • 5.575 mm (4)
  • 6.0 mm (4)
  • 6.351 mm (4)
  • 6.476 mm (4)
Cutting Width Min komu Cutting Width Max
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (11)
  • R-ROUND (6)
  • S-SQUARE 90 (10)
  • TN-TOP NOTCH (7)
  • V-DIAMOND/RHOMBIC 35 (2)
Insert Size
Insert Size
  • 3 (3)
  • 4 (4)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (9)
  • B L (5)
  • C A (15)
  • C N (20)
  • D P (7)
  • H T (11)
  • H W (36)
backEnd
Connection Type
Connection Type
  • TAPER SHANK (29)
System Size
System Size
  • KM80ATC (29)
No filters matching ""
Zúžení podle kategorie:
Informace o produktech
Metrické
Palcové

PŮVODNÍ PRODUKT

NR 45° - Obráběcí jednotky KM40 (Řezání závitů a drážkování TOP NOTCH) NR 45° - Obráběcí jednotky KM40 (Řezání závitů a drážkování TOP NOTCH)

(3 Products)
  • Shank - KM-ATCShank - KM-ATC
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
Informace o produktech
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
2398753 KM80ATCNSL3 KM80ATCNSL3 70.0000 2.755 53.0000 2.086 NG3L 2.16 4.77
    Ceníková cena:
    $627.94 /každý
    Vaše cena::
    2044321 KM80ATCNSL4 KM80ATCNSL4 70.0000 2.755 53.0000 2.086 NG4L 2.17 4.77
      Ceníková cena:
      $830.14 /každý
      Vaše cena::
      2203622 KM80ATCNSR4 KM80ATCNSR4 70.0000 2.755 53.0000 2.086 NG4R 2.17 4.77
        Ceníková cena:
        $830.14 /každý
        Vaše cena::
        Ceníková cena:
        Sleva: %
        Vaše cena::
        Výměna Tato položka není k dispozici
        Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

        PŮVODNÍ PRODUKT