Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Máte otázku týkající se produktu?

Zobrazit úplný seznam globálních servisních odborníků podle specializace.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Zpět k řešení

Úprava řešení

Přidání řešení

Název řešení: {{SolutionName}}

Boring Bars

Vybrat filtry
Filters
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (44)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (44)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (44)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (44)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (44)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (44)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (44)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (44)
  • M Stainless Steel (44)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (44)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (44)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (44)
  • K Cast Iron (44)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (44)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (44)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (44)
  • N Non-Ferrous Materials (44)
    • N1
      Wrought Aluminum
      (44)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (44)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (44)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (33)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (44)
    • N6
      Carbon, Graphite Composites, CFRP
      (44)
    • N7
      MMC's
      (33)
  • S High-Temp Alloys (44)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (44)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (44)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (44)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (44)
  • H Hardened Materials (13)
    • H1
      Hardened Materials 44-48 HRC
      (13)
    • H2
      Hardened Materials 48-55 HRC
      (13)
Select All Star
  • DE (2)
  • IN (2)
  • US (15)
Applications
Applications
  • Grooving Grooving (3)
  • ID Grooving ID Grooving (41)
  • ID Thread Turning ID Thread Turning (44)
  • Threading Threading (1)
Type of Thread
Type of Thread
  • 60 (43)
  • ACME (23)
  • API RD (17)
  • BSW (8)
  • BUTTRESS (9)
  • STUB ACME (17)
  • UN (35)
  • UNJ (8)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (38)
  • Lightly Interrupted Cut (38)
  • Smooth Cut (43)
  • Varying Depth of Cut (38)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (43)
  • 2.0 (39)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.003 in (30)
  • 0.004 in (25)
  • 0.006 in (2)
  • 0.007 in (30)
  • 0.008 in (43)
  • 0.01 in (16)
  • 0.012 in (8)
  • 0.014 in (22)
  • 0.017 in (17)
  • 0.02 in (16)
  • 0.023 in (22)
  • 0.03 in (16)
  • 0.031 in (33)
  • 0.039 in (33)
  • 0.047 in (33)
  • 0.049 in (33)
  • 0.06 in (33)
  • 0.062 in (17)
  • 0.063 in (22)
  • 0.069 in (33)
  • 0.078 in (17)
  • 0.079 in (22)
  • 0.089 in (22)
  • 0.095 in (22)
  • 0.098 in (5)
  • 0.125 in (5)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.076 mm (30)
  • 0.1 mm (25)
  • 0.151 mm (2)
  • 0.176 mm (30)
  • 0.2 mm (43)
  • 0.225 mm (8)
  • 0.25 mm (16)
  • 0.301 mm (8)
  • 0.325 mm (22)
  • 0.351 mm (17)
  • 0.426 mm (17)
  • 0.5 mm (16)
  • 0.576 mm (22)
  • 0.75 mm (16)
  • 0.775 mm (33)
  • 1.0 mm (33)
  • 1.201 mm (33)
  • 1.25 mm (33)
  • 1.5 mm (33)
  • 1.576 mm (17)
  • 1.6 mm (22)
  • 1.75 mm (33)
  • 1.975 mm (17)
  • 2.0 mm (22)
  • 2.25 mm (22)
  • 2.401 mm (22)
  • 2.5 mm (5)
  • 3.176 mm (5)
Corner Radius Min komu Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (33)
  • TN10P (28)
  • TN6010 (43)
  • TN6025 (44)
  • TN7110 (38)
  • WU10HT (8)
  • WU10PT (13)
  • WU25PT (9)
Hand Of Tool
Hand Of Tool
  • L (18)
  • R (26)
F Dimension
F Dimension
  • 6.551 mm (2)
  • 7.0 mm (2)
  • 10.3 mm (1)
  • 11.0 mm (4)
  • 11.101 mm (2)
  • 12.701 mm (2)
  • 13.0 mm (2)
  • 14.275 mm (2)
  • 16.25 mm (2)
  • 17.0 mm (4)
  • 17.475 mm (4)
  • 19.425 mm (1)
  • 22.0 mm (2)
  • 22.225 mm (2)
  • 25.401 mm (2)
  • 27.0 mm (3)
  • 31.75 mm (3)
  • 32.525 mm (1)
  • 34.926 mm (2)
  • 35.0 mm (1)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.258 in (2)
  • 0.276 in (2)
  • 0.406 in (1)
  • 0.433 in (4)
  • 0.437 in (2)
  • 0.5 in (2)
  • 0.512 in (2)
  • 0.562 in (2)
  • 0.64 in (2)
  • 0.669 in (4)
  • 0.689 in (4)
  • 0.765 in (1)
  • 0.866 in (2)
  • 0.875 in (2)
  • 1.0 in (2)
  • 1.063 in (3)
  • 1.25 in (3)
  • 1.281 in (1)
  • 1.375 in (2)
  • 1.379 in (1)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 11.175 mm (2)
  • 11.5 mm (2)
  • 18.5 mm (2)
  • 18.55 mm (2)
  • 20.326 mm (1)
  • 22.0 mm (2)
  • 25.401 mm (2)
  • 26.0 mm (2)
  • 28.576 mm (2)
  • 34.0 mm (4)
  • 34.926 mm (4)
  • 44.0 mm (2)
  • 44.45 mm (2)
  • 50.801 mm (2)
  • 54.0 mm (3)
  • 57.151 mm (3)
  • 60.325 mm (1)
  • 63.5 mm (3)
  • 69.851 mm (2)
  • 70.0 mm (1)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.44 in (2)
  • 0.453 in (2)
  • 0.728 in (2)
  • 0.73 in (2)
  • 0.8 in (1)
  • 0.866 in (2)
  • 1.0 in (2)
  • 1.024 in (2)
  • 1.125 in (2)
  • 1.339 in (4)
  • 1.375 in (4)
  • 1.732 in (2)
  • 1.75 in (2)
  • 2.0 in (2)
  • 2.126 in (3)
  • 2.25 in (3)
  • 2.375 in (1)
  • 2.5 in (3)
  • 2.75 in (2)
  • 2.757 in (1)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (43)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (43)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (4)
  • S (40)
Maximum Bore Depth
Maximum Bore Depth
  • 1.23 in (1)
  • 1.232 in (1)
  • 1.29 in (1)
  • 1.5 in (1)
  • 1.891 in (2)
  • 2.0 in (2)
  • 2.5 in (3)
  • 2.52 in (2)
  • 3.0 in (2)
  • 3.15 in (2)
  • 3.938 in (4)
  • 4.0 in (6)
  • 5.0 in (3)
  • 5.039 in (2)
  • 6.0 in (2)
  • 6.299 in (3)
  • 7.0 in (2)
  • 7.875 in (1)
  • 8.0 in (4)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 31.25 mm (1)
  • 31.3 mm (1)
  • 32.775 mm (1)
  • 38.1 mm (1)
  • 48.0 mm (2)
  • 50.801 mm (2)
  • 63.5 mm (3)
  • 64.0 mm (2)
  • 76.2 mm (2)
  • 80.0 mm (2)
  • 100.0 mm (4)
  • 101.601 mm (6)
  • 127.0 mm (3)
  • 128.0 mm (2)
  • 152.4 mm (2)
  • 160.0 mm (3)
  • 177.8 mm (2)
  • 200.0 mm (1)
  • 203.201 mm (4)
Maximum Bore Depth Min komu Maximum Bore Depth Max
frontEnd
Cutting Width
Cutting Width
  • 0.02 in (16)
  • 0.031 in (16)
  • 0.039 in (33)
  • 0.041 in (8)
  • 0.047 in (38)
  • 0.055 in (16)
  • 0.058 in (16)
  • 0.06 in (33)
  • 0.061 in (8)
  • 0.062 in (38)
  • 0.067 in (16)
  • 0.069 in (33)
  • 0.073 in (17)
  • 0.077 in (16)
  • 0.078 in (17)
  • 0.079 in (33)
  • 0.088 in (33)
  • 0.089 in (25)
  • 0.094 in (8)
  • 0.095 in (38)
  • 0.098 in (33)
  • 0.108 in (33)
  • 0.119 in (38)
  • 0.125 in (38)
  • 0.126 in (17)
  • 0.128 in (33)
  • 0.138 in (38)
  • 0.147 in (8)
  • 0.152 in (16)
  • 0.156 in (17)
  • 0.157 in (22)
  • 0.167 in (17)
  • 0.177 in (22)
  • 0.188 in (19)
  • 0.189 in (22)
  • 0.192 in (8)
  • 0.195 in (17)
  • 0.197 in (5)
  • 0.217 in (5)
  • 0.237 in (5)
  • 0.25 in (5)
Cutting Width Min komu Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (16)
  • 0.775 mm (16)
  • 0.8 mm (16)
  • 1.0 mm (33)
  • 1.05 mm (8)
  • 1.201 mm (38)
  • 1.401 mm (16)
  • 1.475 mm (16)
  • 1.5 mm (33)
  • 1.55 mm (8)
  • 1.576 mm (38)
  • 1.701 mm (16)
  • 1.75 mm (33)
  • 1.826 mm (17)
  • 1.951 mm (16)
  • 1.975 mm (17)
  • 2.0 mm (33)
  • 2.2 mm (33)
  • 2.225 mm (8)
  • 2.25 mm (25)
  • 2.375 mm (8)
  • 2.401 mm (38)
  • 2.5 mm (33)
  • 2.75 mm (33)
  • 3.0 mm (38)
  • 3.176 mm (38)
  • 3.2 mm (17)
  • 3.25 mm (33)
  • 3.5 mm (38)
  • 3.725 mm (8)
  • 3.85 mm (16)
  • 3.95 mm (17)
  • 3.975 mm (8)
  • 4.0 mm (22)
  • 4.25 mm (17)
  • 4.5 mm (22)
  • 4.775 mm (19)
  • 4.801 mm (22)
  • 4.875 mm (8)
  • 4.95 mm (17)
  • 5.0 mm (5)
  • 5.5 mm (5)
  • 6.0 mm (5)
  • 6.351 mm (5)
Cutting Width Min komu Cutting Width Max
Insert Size
Insert Size
  • 1 (5)
  • 2 (16)
  • 3 (17)
  • 4 (5)
  • 6 (1)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.067 in (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 1.701 mm (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
backEnd
Back-End Diameter
Back-End Diameter
  • 9.525 mm (1)
  • 10.0 mm (1)
  • 12.0 mm (3)
  • 12.701 mm (3)
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 19.05 mm (2)
  • 20.0 mm (2)
  • 25.0 mm (4)
  • 25.401 mm (6)
  • 31.75 mm (3)
  • 32.0 mm (2)
  • 38.1 mm (2)
  • 40.0 mm (3)
  • 44.45 mm (2)
  • 50.0 mm (1)
  • 50.801 mm (4)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.375 in (1)
  • 0.394 in (1)
  • 0.473 in (3)
  • 0.5 in (3)
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.75 in (2)
  • 0.787 in (2)
  • 0.984 in (4)
  • 1.0 in (6)
  • 1.25 in (3)
  • 1.26 in (2)
  • 1.5 in (2)
  • 1.575 in (3)
  • 1.75 in (2)
  • 1.969 in (1)
  • 2.0 in (4)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""
Informace o produktech
Metrické
Palcové

PŮVODNÍ PRODUKT

A-NNT A-NNT

Drážkování TOP NOTCH™ – vyvrtávací tyče
(19 Products)
  • I.D. Internal ThreadingI.D. Internal Threading
Informace o produktech
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Insert Size [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size Gage Insert
3632117 A08NER2 A08NER2 W   2 12.7 .5 18.5420 .7300 11.1000 .4370 203.2000 8.000 1/16-27 NPT N.2L
    Ceníková cena:
    $147.39 /každý
    Vaše cena::
    3632114 A10SNER2 A10SNER2 W   2 15.875 .625 25.4000 1.000 12.7000 .5000 254.0000 10.000 1/8-27 NPT N.2L
      Ceníková cena:
      $176.56 /každý
      Vaše cena::
      3632118 A12SNER2 A12SNER2 W   2 19.05 .75 28.5750 1.125 14.2750 .5620 254.0000 10.000 1/8-27 NPT N.2L
        Ceníková cena:
        $210.50 /každý
        Vaše cena::
        3632113 A16NER3 A16NER3 W   3 25.4 1.0 34.9250 1.375 17.4750 .6880 304.8000 12.000 1/4-18 NPT N.3L
          Ceníková cena:
          $270.82 /každý
          Vaše cena::
          3632116 A20NER3 A20NER3 W   3 31.75 1.25 44.4500 1.750 22.2250 .8750 355.6000 14.000 1/4-18 NPT N.3L
            Ceníková cena:
            $342.12 /každý
            Vaše cena::
            3632115 A24NER3 A24NER3 W   3 38.1 1.5 50.8000 2.000 25.4000 1.000 355.6000 14.000 1/4-18 NPT N.3L
              Ceníková cena:
              $353.03 /každý
              Vaše cena::
              Ceníková cena:
              Sleva: %
              Vaše cena::
              Výměna Tato položka není k dispozici
              Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

              PŮVODNÍ PRODUKT

              A-NNT A-NNT

              Drážkování TOP NOTCH™ – vyvrtávací tyče
              (3 Products)
              • I.D. Internal ThreadingI.D. Internal Threading
              Informace o produktech
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Insert Size [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [F] F Dimension [F] F Dimension [A] Coolant Hole Diameter [A] Coolant Hole Dia [CS] Coolant Supply Size Gage Insert
              3632121 A06NER1 A06NER1 W   1 9.525 .375 11.1760 .4400 7.9250 .3120 152.4000 6.000 31.7500 1.250 6.5530 .2580 3.1750 .1250   N.1L
                Ceníková cena:
                $143.53 /každý
                Vaše cena::
                3632119 A08NER1 A08NER1 W   1 12.7 .5 11.1760 .4400 7.8740 .3100 203.2000 8.000 32.7660 1.290 6.5530 .2580 2.3880 .0940 1/16-27 NPT N.1L
                  Ceníková cena:
                  $147.39 /každý
                  Vaše cena::
                  3632148 A10NER1 A10NER1 W   1 15.875 .625 20.3200 .8000     254.0000 10.000     10.3120 .4060     1/8-27 NPT N.1L
                    Ceníková cena:
                    $176.56 /každý
                    Vaše cena::
                    Ceníková cena:
                    Sleva: %
                    Vaše cena::
                    Výměna Tato položka není k dispozici
                    Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                    PŮVODNÍ PRODUKT

                    Integrální pro vnitřní průměry Závitovací vyvrtávací tyče • A-NNT • Metrické Integrální pro vnitřní průměry Závitovací vyvrtávací tyče • A-NNT • Metrické

                    Vyvrtávací tyče
                    (16 Products)
                    • I.D. Internal ThreadingI.D. Internal Threading
                    Informace o produktech
                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Insert Size