Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Máte otázku týkající se produktu?

Zobrazit úplný seznam globálních servisních odborníků podle specializace.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík

M-Style Clamping • For Negative Style Inserts

Vybrat filtry
Filters
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (12)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (12)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (12)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (12)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (12)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (12)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (12)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (12)
  • M Stainless Steel (12)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (12)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (12)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (12)
  • K Cast Iron (12)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (12)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (12)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (12)
  • N Non-Ferrous Materials (12)
    • N1
      Wrought Aluminum (12)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (12)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (9)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (12)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (9)
    • N6
      Carbon, Graphite Composites, CFRP (9)
    • N7
      MMC's (9)
  • S High-Temp Alloys (12)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (12)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (12)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (12)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (12)
  • H Hardened Materials (11)
    • H1
      Hardened Materials 44-48 HRC (11)
    • H2
      Hardened Materials 48-55 HRC (11)
    • H3
      Hardened Materials 56-60 HRC (11)
    • H4
      Hardened Materials >60 HRC (11)
Select All Star
  • US (2)
Applications
Applications
  • Facing Facing (1)
  • Multiple Direction Cutting Multiple Direction Cutting (11)
  • Profiling Profiling (10)
  • TRN Boring TRN Boring (12)
  • Turning Turning (1)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (12)
  • Lightly Interrupted Cut (12)
  • Smooth Cut (12)
  • Varying Depth of Cut (12)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (1)
  • 93.0 (4)
  • 95.0 (7)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (9)
  • 2.0 (7)
  • 3.0 (3)
  • 4.0 (8)
  • 6.0 (4)
  • 8.0 (4)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 7.875 in (1)
  • 10.0 in (1)
  • 11.811 in (1)
  • 12.0 in (1)
  • 13.781 in (4)
  • 14.0 in (3)
  • 16.0 in (1)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 200.0 mm (1)
  • 254.0 mm (1)
  • 300.0 mm (1)
  • 304.8 mm (1)
  • 350.0 mm (4)
  • 355.6 mm (3)
  • 406.401 mm (1)
Over All Length [L] Min komu Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (6)
  • 0.008 in (7)
  • 0.016 in (10)
  • 0.024 in (2)
  • 0.031 in (12)
  • 0.047 in (12)
  • 0.063 in (9)
  • 0.095 in (2)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (6)
  • 0.2 mm (7)
  • 0.4 mm (10)
  • 0.601 mm (2)
  • 0.8 mm (12)
  • 1.201 mm (12)
  • 1.6 mm (9)
  • 2.401 mm (2)
Corner Radius Min komu Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CW2015 (9)
  • CW5025 (11)
  • HK1500 (7)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • PB300 (2)
  • THM (4)
  • THM-X (2)
  • THMF-X (3)
  • TN10P (12)
  • TN10U (9)
  • TN15M (12)
  • TN15U (9)
  • TN2000 (7)
  • TN20K (12)
  • TN20P (12)
  • TN30M (12)
  • TN30P (9)
  • TN4000 (7)
  • TN5015 (9)
  • TN5020 (7)
  • TN5105 (7)
  • TN5120 (9)
  • TN6010 (6)
  • TN6025 (5)
  • TN7005 (6)
  • TN7010 (9)
  • TN7015 (9)
  • TN7025 (9)
  • TN7035 (7)
  • TN7105 (6)
  • TN7110 (9)
  • TN7115 (9)
  • TN7125 (7)
  • TN7135 (7)
  • TN8025 (10)
  • TTI15 (2)
  • TTM09 (1)
  • TTR (2)
  • TTS (4)
  • TTX (3)
  • WBH10C (8)
  • WBH10P (6)
  • WBH10U (9)
  • WBH20P (9)
  • WBH25P (7)
  • WBH25U (5)
  • WBH30P (6)
  • WBK40U (2)
  • WBK45U (5)
  • WDN00U (4)
  • WDN25U (9)
  • WK05CT (12)
  • WK15CT (6)
  • WK20CT (12)
  • WM15CT (12)
  • WM25CT (12)
  • WM35CT (12)
  • WP05CT (4)
  • WP15CT (12)
  • WP25CT (12)
  • WP35CT (12)
  • WS10PT (12)
  • WS25PT (12)
  • WU10HT (12)
  • WU10PT (8)
  • WU25PT (8)
Hand Of Tool
Hand Of Tool
  • L (2)
  • R (10)
Wiper Insert
Wiper Insert
  • N (12)
  • Y (7)
F Dimension
F Dimension
  • 12.701 mm (1)
  • 16.25 mm (1)
  • 19.425 mm (1)
  • 22.0 mm (1)
  • 25.401 mm (1)
  • 27.0 mm (1)
  • 28.451 mm (1)
  • 34.801 mm (1)
  • 35.0 mm (4)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.5 in (1)
  • 0.64 in (1)
  • 0.765 in (1)
  • 0.866 in (1)
  • 1.0 in (1)
  • 1.063 in (1)
  • 1.12 in (1)
  • 1.37 in (1)
  • 1.379 in (4)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 23.625 mm (1)
  • 31.0 mm (1)
  • 37.0 mm (1)
  • 37.35 mm (1)
  • 43.301 mm (1)
  • 50.0 mm (1)
  • 50.801 mm (1)
  • 63.0 mm (4)
  • 63.5 mm (1)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.93 in (1)
  • 1.22 in (1)
  • 1.457 in (1)
  • 1.47 in (1)
  • 1.705 in (1)
  • 1.969 in (1)
  • 2.0 in (1)
  • 2.48 in (4)
  • 2.5 in (1)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (7)
  • E (5)
Maximum Bore Depth
Maximum Bore Depth
  • 3.0 in (1)
  • 3.938 in (1)
  • 4.0 in (1)
  • 4.992 in (1)
  • 5.0 in (1)
  • 6.0 in (1)
  • 6.299 in (1)
  • 7.875 in (4)
  • 8.0 in (1)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 76.2 mm (1)
  • 100.0 mm (1)
  • 101.601 mm (1)
  • 126.801 mm (1)
  • 127.0 mm (1)
  • 152.4 mm (1)
  • 160.0 mm (1)
  • 200.0 mm (4)
  • 203.201 mm (1)
Maximum Bore Depth Min komu Maximum Bore Depth Max
frontEnd
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (4)
  • D-DIAMOND/RHOMBIC 55 (2)
  • T-TRIANGLE 60 (1)
  • V-DIAMOND/RHOMBIC 35 (2)
  • W-TRIGON 80 (3)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (9)
  • B L (9)
  • C A (9)
  • C N (12)
  • D P (9)
  • H T (2)
  • H W (12)
backEnd
Back-End Diameter
Back-End Diameter
  • 19.05 mm (1)
  • 25.0 mm (1)
  • 25.401 mm (1)
  • 31.701 mm (1)
  • 31.75 mm (1)
  • 38.1 mm (1)
  • 40.0 mm (1)
  • 50.0 mm (4)
  • 50.801 mm (1)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.75 in (1)
  • 0.984 in (1)
  • 1.0 in (1)
  • 1.248 in (1)
  • 1.25 in (1)
  • 1.5 in (1)
  • 1.575 in (1)
  • 1.969 in (4)
  • 2.0 in (1)
Back-End Diameter Min komu Back-End Diameter Max
Shank Height
Shank Height
  • 0.939 in (1)
  • 1.53 in (1)
  • 1.848 in (2)
Shank Height Min komu Shank Height Max
Shank Height
Shank Height
  • 23.826 mm (1)
  • 38.825 mm (1)
  • 46.95 mm (2)
Shank Height Min komu Shank Height Max
Shank Width
Shank Width
  • 0.864 in (1)
  • 1.455 in (1)
  • 1.848 in (2)
Shank Width Min komu Shank Width Max
Shank Width
Shank Width
  • 21.951 mm (1)
  • 36.95 mm (1)
  • 46.95 mm (2)
Shank Width Min komu Shank Width Max
No filters matching ""

A-MWLN -5°

(3) A-MWLN -5°

A-MCLN 95°

(4) A-MCLN 95°

A-MVUN -3°

(1) A-MVUN -3°

A-MVUN 93°

(1) A-MVUN 93°

A-MTFN 90°

(1) A-MTFN 90°

A-MDUN -3°

(2) A-MDUN -3°
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

I have read and accepted the Terms & Conditions of use

 

Can’t find the file type you’re looking for?

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku
Zobrazit košík
DOWNLOAD TYPE:



. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?