Order Products Online
successfully added to cart
View Cart
COVID-19: Jaké jsou reakce firmy WIDIA

Zjistit více

S-Style Clamping • For Positive Style Inserts

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (229)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (229)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (229)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (229)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (229)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (229)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (229)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (229)
  • M Stainless Steel (229)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (229)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (229)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (229)
  • K Cast Iron (229)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (229)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (229)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (229)
  • N Non-Ferrous Materials (272)
    • N1
      Wrought Aluminum
      (272)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (272)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (264)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (272)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (264)
    • N6
      Carbon, Graphite Composites, CFRP
      (264)
    • N7
      MMC's
      (264)
  • S High-Temp Alloys (230)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (230)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (230)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (230)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (118)
  • H Hardened Materials (184)
    • H1
      Hardened Materials 44-48 HRC
      (184)
    • H2
      Hardened Materials 48-55 HRC
      (184)
    • H3
      Hardened Materials 56-60 HRC
      (184)
    • H4
      Hardened Materials >60 HRC
      (184)
Select First Choice
  • DE (18)
Applications
  • Back Boring Back Boring (101)
  • Chamfer Turning Chamfer Turning (1)
  • Cut-Off Cut-Off (1)
  • Deep Grooving Deep Grooving (1)
  • Face Grooving Face Grooving (1)
  • Facing Facing (4)
  • Grooving Grooving (1)
  • ID Facing ID Facing (1)
  • ID Grooving ID Grooving (1)
  • ID Thread Turning ID Thread Turning (1)
  • Multiple Direction Cutting Multiple Direction Cutting (160)
  • OD Thread Turning OD Thread Turning (1)
  • Plunge Turning Plunge Turning (1)
  • Profiling Profiling (101)
  • TRN Boring TRN Boring (152)
  • Turning Turning (4)
Cutting Condition
  • Heavily Interrupted Cut (224)
  • Lightly Interrupted Cut (229)
  • Smooth Cut (229)
  • Varying Depth of Cut (229)
Tool Cutting Edge Angle
  • 0.0 (24)
  • -3.0 (18)
  • 90.0 (78)
  • 93.0 (48)
  • 95.0 (102)
  • 107.5 (16)
to
Connection Style
  • Boring Bar Shank (285)
Cutting Edges Per Insert
  • 1.0 (257)
  • 2.0 (219)
  • 3.0 (59)
  • 4.0 (125)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.1 (70)
  • 0.2 (237)
  • 0.203 (81)
  • 0.397 (184)
  • 0.4 (272)
  • 0.794 (100)
  • 0.8 (278)
  • 1.2 (73)
  • 1.6 (2)
to
Corner Radius
  • 0.004 (70)
  • 0.0078 (18)
  • 0.0079 (23)
  • 0.008 (232)
  • 0.0156 (272)
  • 0.0157 (5)
  • 0.0158 (59)
  • 0.016 (10)
  • 0.0312 (94)
  • 0.0313 (278)
  • 0.0315 (91)
  • 0.0469 (73)
  • 0.047 (13)
  • 0.0472 (18)
  • 0.063 (2)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • CG5 (66)
  • CG6 (23)
  • CM1 (66)
  • HCK10 (82)
  • HK1500 (72)
  • HK35 (68)
  • HWK10 (10)
  • HWK15 (82)
  • K420 (18)
  • PB100 (66)
  • PB170 (50)
  • PB250 (73)
  • PB300 (42)
  • PD100 (82)
  • PD50 (66)
  • SP0G00 (10)
  • SP0PW3 (7)
  • SPN3W1 (16)
  • THM (112)
  • THM-X (55)
  • TN1000 (32)
  • TN10P (112)
  • TN10U (112)
  • TN15M (110)
  • TN15U (103)
  • TN2000 (79)
  • TN20K (112)
  • TN20P (112)
  • TN30M (110)
  • TN4000 (54)
  • TN5015 (91)
  • TN5020 (101)
  • TN5105 (91)
  • TN5120 (111)
  • TN6010 (49)
  • TN6025 (42)
  • TN7005 (51)
  • TN7010 (101)
  • TN7015 (111)
  • TN7025 (101)
  • TN7035 (101)
  • TN7105 (109)
  • TN7110 (111)
  • TN7115 (111)
  • TN7125 (111)
  • TN7135 (111)
  • TN8025 (95)
  • TTI15 (77)
  • TTM (16)
  • TTM09 (18)
  • TTR (91)
  • TTS (48)
  • TTX (59)
  • W00160 (13)
  • W00162 (40)
  • W00342 (41)
  • WBH10C (97)
  • WBH10P (174)
  • WBH10U (184)
  • WBH25P (213)
  • WBH25U (44)
  • WBH30P (147)
  • WBK45U (57)
  • WDN00U (161)
  • WDN25U (257)
  • WK05CT (105)
  • WK15CT (95)
  • WK20CT (242)
  • WM15CT (238)
  • WM25CT (229)
  • WP15CT (229)
  • WP20TT (61)
  • WP25CT (277)
  • WP35CT (68)
  • WS10PT (76)
  • WS25PT (69)
  • WU10HT (104)
  • WU20HT (27)
  • YY4200 (5)
Hand Of Tool
  • L (134)
  • R (151)
Wiper Insert
  • N (278)
  • Y (110)
Minimum Axial Groove Diameter
  • 0.315 (4)
  • 0.3937 (2)
  • 0.415 (4)
  • 0.433 (14)
  • 0.4331 (4)
  • 0.48 (13)
  • 0.5118 (9)
  • 0.512 (13)
  • 0.6 (18)
  • 0.6299 (9)
  • 0.63 (17)
  • 0.73 (5)
  • 0.77 (17)
  • 0.787 (18)
  • 0.7874 (21)
  • 0.85 (6)
  • 0.93 (17)
  • 0.98 (12)
  • 0.984 (18)
  • 0.9843 (17)
  • 1.03 (1)
  • 1.2 (10)
  • 1.2598 (14)
  • 1.26 (8)
  • 1.3 (8)
  • 1.47 (1)
  • 1.5748 (1)
  • 1.575 (4)
  • 1.76 (1)
to
Minimum Axial Groove Diameter
  • 8.0 (4)
  • 10.0 (2)
  • 10.54 (2)
  • 10.541 (2)
  • 11.0 (18)
  • 12.19 (7)
  • 12.192 (6)
  • 13.0 (22)
  • 15.24 (18)
  • 16.0 (26)
  • 18.54 (3)
  • 18.542 (2)
  • 19.55 (1)
  • 19.558 (9)
  • 19.56 (7)
  • 20.0 (39)
  • 21.59 (6)
  • 23.62 (10)
  • 23.622 (7)
  • 24.89 (6)
  • 24.892 (6)
  • 25.0 (35)
  • 26.16 (1)
  • 30.48 (10)
  • 32.0 (22)
  • 33.02 (8)
  • 37.338 (1)
  • 40.0 (5)
  • 44.704 (1)
to
Cutting Direction
  • B (90)
  • E (183)
  • P (12)
Rake Angle Style
  • NEGATIVE-ZERO (228)
  • NEUTRAL (ZERO) (56)
  • POSITIVE-NEGATIVE (1)
Maximum Bore Depth
  • 32.0 (8)
  • 36.0 (4)
  • 38.08 (5)
  • 38.1 (5)
  • 40.0 (12)
  • 47.625 (1)
  • 47.628 (4)
  • 48.0 (22)
  • 50.8 (13)
  • 57.15 (7)
  • 60.0 (10)
  • 63.48 (2)
  • 63.5 (8)
  • 63.52 (3)
  • 63.6 (2)
  • 64.0 (23)
  • 72.0 (16)
  • 76.0 (2)
  • 76.2 (22)
  • 76.4 (2)
  • 80.0 (19)
  • 95.22 (2)
  • 95.25 (6)
  • 96.0 (16)
  • 100.0 (14)
  • 101.6 (12)
  • 114.0 (2)
  • 114.3 (8)
  • 120.0 (16)
  • 127.0 (1)
  • 128.0 (4)
  • 150.0 (8)
  • 152.4 (6)
  • 192.0 (1)
to
Maximum Bore Depth
  • 1.24 (5)
  • 1.26 (3)
  • 1.4172 (4)
  • 1.5 (10)
  • 1.56 (5)
  • 1.5748 (4)
  • 1.576 (3)
  • 1.872 (1)
  • 1.875 (4)
  • 1.88 (10)
  • 1.89 (12)
  • 2.0 (13)
  • 2.25 (7)
  • 2.358 (2)
  • 2.3622 (4)
  • 2.364 (4)
  • 2.48 (2)
  • 2.5 (13)
  • 2.5196 (11)
  • 2.52 (12)
  • 2.82 (2)
  • 2.832 (3)
  • 2.8344 (11)
  • 3.0 (26)
  • 3.1496 (6)
  • 3.16 (13)
  • 3.75 (8)
  • 3.7794 (11)
  • 3.78 (5)
  • 3.92 (2)
  • 3.936 (6)
  • 3.9372 (6)
  • 4.0 (12)
  • 4.5 (10)
  • 4.722 (2)
  • 4.7244 (14)
  • 5.0 (1)
  • 5.04 (4)
  • 5.9058 (8)
  • 6.0 (6)
  • 7.5588 (1)
to
Boring Bar Material
  • C (124)
  • S (161)
frontEnd
Clamp Style
  • S (285)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (133)
  • D-DIAMOND/RHOMBIC 55 (82)
  • T-TRIANGLE 60 (59)
  • V-DIAMOND/RHOMBIC 35 (12)
Maximum Cutting Depth
  • 2.81 (1)
  • 3.09 (2)
  • 3.2 (2)
  • 4.31 (1)
  • 4.655 (1)
  • 4.75 (5)
  • 6.35 (2)
to
Maximum Cutting Depth
  • 0.11 (1)
  • 0.1217 (2)
  • 0.126 (2)
  • 0.1697 (1)
  • 0.1832 (1)
  • 0.187 (5)
  • 0.25 (2)
to
insertGeometry
Cutting Tool Material
  • B H (202)
  • B L (218)
  • C N (43)
  • D P (264)
  • H T (77)
  • H W (278)
backEnd
Connection Type
  • BORING BAR (284)
  • SQUARE SHANK (1)
Back-End Diameter
  • 0.2362 (4)
  • 0.31 (5)
  • 0.312 (1)
  • 0.3125 (4)
  • 0.315 (15)
  • 0.375 (17)
  • 0.39 (5)
  • 0.393 (2)
  • 0.3937 (8)
  • 0.394 (7)
  • 0.47 (12)
  • 0.472 (3)
  • 0.4724 (11)
  • 0.5 (19)
  • 0.62 (2)
  • 0.625 (21)
  • 0.6299 (22)
  • 0.63 (17)
  • 0.75 (30)
  • 0.787 (2)
  • 0.7874 (20)
  • 0.79 (13)
  • 0.98 (2)
  • 0.984 (6)
  • 0.9843 (14)
  • 1.0 (17)
  • 1.25 (1)
  • 1.2598 (1)
  • 1.26 (4)
  • 1.5 (1)
to
Back-End Diameter
  • 6.0 (4)
  • 7.9375 (1)
  • 7.938 (4)
  • 8.0 (20)
  • 9.52 (5)
  • 9.525 (12)
  • 10.0 (22)
  • 12.0 (26)
  • 12.7 (19)
  • 15.87 (4)
  • 15.875 (14)
  • 15.88 (3)
  • 15.9 (2)
  • 16.0 (39)
  • 19.0 (4)
  • 19.05 (24)
  • 19.1 (2)
  • 20.0 (35)
  • 25.0 (22)
  • 25.4 (17)
  • 31.75 (1)
  • 32.0 (5)
  • 38.1 (1)
to
other
Grade
  • W (8)
  • WG (277)
Platform
  • S-Style Clamping (148)
Tool Unit
  • I (113)
  • M (173)
Over All Length [L]
  • 110.0 (12)
  • 122.0 (1)
  • 123.0 (1)
  • 123.25 (1)
  • 123.625 (2)
  • 124.25 (1)
  • 125.0 (18)
  • 125.73 (1)
  • 127.0 (3)
  • 148.0 (1)
  • 149.25 (3)
  • 149.315 (1)
  • 150.0 (12)
  • 151.13 (2)
  • 151.25 (2)
  • 152.4 (15)
  • 152.5 (1)
  • 177.5 (1)
  • 178.0 (2)
  • 178.75 (1)
  • 179.34 (2)
  • 180.0 (8)
  • 181.25 (2)
  • 199.41 (2)
  • 200.0 (33)
  • 201.105 (2)
  • 201.422 (2)
  • 201.45 (2)
  • 203.2 (17)
  • 250.0 (30)
  • 251.45 (3)
  • 251.58 (2)
  • 251.587 (1)
  • 251.59 (1)
  • 251.714 (2)
  • 252.9 (2)
  • 253.995 (2)
  • 254.0 (45)
  • 300.0 (26)
  • 302.25 (2)
  • 302.39 (1)
  • 304.8 (15)
  • 350.0 (1)
  • 355.6 (2)
to
Over All Length [L]
  • 4.3307 (4)
  • 4.331 (8)
  • 4.803 (1)
  • 4.843 (1)
  • 4.8524 (1)
  • 4.867 (2)
  • 4.8917 (1)
  • 4.921 (10)
  • 4.9213 (8)
  • 4.95 (1)
  • 5.0 (3)
  • 5.827 (1)
  • 5.876 (3)
  • 5.879 (1)
  • 5.9055 (2)
  • 5.906 (10)
  • 5.95 (2)
  • 5.9547 (2)
  • 6.0 (15)
  • 6.0039 (1)
  • 6.988 (1)
  • 7.008 (2)
  • 7.0374 (1)
  • 7.061 (2)
  • 7.0866 (8)
  • 7.1358 (1)
  • 7.136 (1)
  • 7.851 (2)
  • 7.874 (33)
  • 7.918 (2)
  • 7.93 (2)
  • 7.931 (1)
  • 7.9311 (1)
  • 8.0 (17)
  • 9.8425 (17)
  • 9.843 (13)
  • 9.8996 (2)
  • 9.9 (1)
  • 9.905 (4)
  • 9.91 (2)
  • 9.9567 (2)
  • 10.0 (47)
  • 11.811 (26)
  • 11.9 (2)
  • 11.905 (1)
  • 12.0 (15)
  • 13.7795 (1)
  • 14.0 (2)
to
Insert Hand
  • L (18)
  • N (278)
  • R (24)
obsoleteFacet
  • true (286)
  • false (142)
Category Path
Cutting Condition Material
  • H-All (34)
  • K-All (229)
  • M-All (229)
  • N-All (82)
  • P-All (229)
  • S-All (229)
No filters matching ""
View Products in
Metric
Inch
Vyvrtávací tyče s upínáním typu S pro pozitivní břitové destičky

Ocelová stopka s vnitřním chlazením
(12 Products)
  • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
  • 5236852368
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [A] Coolant Hole Diameter [A] Coolant Hole Dia [CS] Coolant Supply Size Gage Insert Insert Screw ID Drive Size
3883285 A08JSCLCR06 A08JSCLCR06   WG 8.0 .31 11.0000 .4330 6.0000 .2360 110.0000 4.331 2.4000 .0900   CC..060204 T7
    3883283 A10KSCLCR06 A10KSCLCR06   WG 10.0 .39 13.0000 .5120 7.0000 .2760 125.0000 4.921 3.1800 .1250   CC..060204 T7
      3883272 A16RSCLCL09 A16RSCLCL09   WG 16.0 .63 20.0000 .7870 11.0000 .4330 200.0000 7.874 4.0000 .1600 1/8-27 NPT CC..09T308 T15
        3883271 A16RSCLCR09 A16RSCLCR09   WG 16.0 .6299 20.0000 .7874 11.0000 .4331 200.0000 7.874     1/8-27 NPT CC..09T308 T15
          3883270 A20SSCLCL09 A20SSCLCL09   WG 20.0 .7874 25.0000 .9843 13.0000 .5118 250.0000 9.842     1/8-27 NPT CC..09T308 T15
            3883269 A20SSCLCR09 A20SSCLCR09   WG 20.0 .79 25.0000 .9840 13.0000 .5120 250.0000 9.842 4.0000 .1600 1/8-27 NPT CC..09T308 T15
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Vyvrtávací tyče s upínáním typu S pro pozitivní břitové destičky

              Ocelová stopka s vnitřním chlazením
              (6 Products)
              • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
              • Back BoringBack Boring
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size Gage Insert Insert Screw ID Drive Size
              3883475 A20SSDQCL11 A20SSDQCL11   WG 20.0 .7874 25.0000 .9843 13.0000 .5118 250.0000 9.842 1/8-27 NPT DC..11T308 T15
                3883474 A20SSDQCR11 A20SSDQCR11   WG 20.0 .7874 25.0000 .9843 13.0000 .5118 250.0000 9.842 1/8-27 NPT DC..11T308 T15
                  3883473 A25TSDQCL11 A25TSDQCL11   WG 25.0 .9843 32.0000 1.259 17.0000 .6693 300.0000 11.811 1/4-18 NPT DC..11T308 T15
                    3883462 A25TSDQCR11 A25TSDQCR11   WG 25.0 .9843 32.0000 1.259 17.0000 .6693 300.0000 11.811 1/4-18 NPT DC..11T308 T15
                      3883477 A16RSDQCL07 A16RSDQCL07   WG 16.0 .6299 20.0000 .7874 11.0000 .4331 200.0000 7.874 1/8-27 NPT DC..070204 T7
                        3883476 A16RSDQCR07 A16RSDQCR07   WG 16.0 .6299 20.0000 .7874 11.0000 .4331 200.0000 7.874 1/8-27 NPT DC..070204 T7
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Vyvrtávací tyče s upínáním šroubem typu S pro pozitivní břitové destičky

                          Ocelová stopka s vnitřním chlazením
                          (14 Products)
                          • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
                          • Back BoringBack Boring
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size Gage Insert Insert Screw ID Drive Size
                          3883292 A20SSDUCL11 A20SSDUCL11   WG 20.0 .7874 25.0000 .9843 13.0000 .5118 250.0000 9.842 1/8-27 NPT DC..11T308 T15
                            3883291 A20SSDUCR11 A20SSDUCR11   WG 20.0 .7874 25.0000 .9843 13.0000 .5118 250.0000 9.842 1/8-27 NPT DC..11T308 T15
                              3883290 A25TSDUCL11 A25TSDUCL11   WG 25.0 .9843 32.0000 1.259 17.0000 .6693 300.0000 11.811 1/8-27 NPT DC..11T308 T15
                                3883288 A25TSDUCR11 A25TSDUCR11   WG 25.0 .9843 32.0000 1.259 17.0000 .6693 300.0000 11.811 1/8-27 NPT DC..11T308 T15
                                  3883298 A10KSDUCL07 A10KSDUCL07   WG 10.0 .3937 13.0000 .5118 7.0000 .2756 125.0000 4.921   DC..070204 T7
                                    3883297 A10KSDUCR07 A10KSDUCR07   WG 10.0 .3937 13.0000 .5118 7.0000 .2756 125.0000 4.921   DC..070204 T7
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Vyvrtávací tyče s upínáním typu S pro pozitivní břitové destičky

                                      Ocelová stopka s vnitřním chlazením
                                      (4 Products)
                                      • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
                                      • 5236852368
                                      • Back BoringBack Boring
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size Gage Insert Insert Screw ID Drive Size
                                      3883435 A25TSVQBL16 A25TSVQBL16   WG 25.0 .984 32.0000 1.260 17.0000 .6690 300.0000 11.811 1/4-18 NPT VB..160408 T15
                                        3883434 A25TSVQBR16 A25TSVQBR16   WG 25.0 .984 32.0000 1.260 17.0000 .6690 300.0000 11.811 1/4-18 NPT VB..160408 T15
                                          3883437 A16RSVQBL11 A16RSVQBL11   WG 16.0 .6299 20.0000 .7874 11.0000 .4331 200.0000 7.874 1/8-27 NPT VB..110304 T7
                                            3883436 A16RSVQBR11 A16RSVQBR11   WG 16.0 .6299 20.0000 .7874 11.0000 .4331 200.0000 7.874 1/8-27 NPT VB..110304 T7
                                              List price:
                                              Discount: %
                                              Your price::