Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Máte otázku týkající se produktu?

Zobrazit úplný seznam globálních servisních odborníků podle specializace.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Zpět k řešení

Úprava řešení

Přidání řešení

Název řešení: {{SolutionName}}

Small Hole Boring Bars For Turning

Vybrat filtry
Filters
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (211)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (211)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (211)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (211)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (211)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (211)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (211)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (211)
  • M Stainless Steel (211)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (211)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (211)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (211)
  • K Cast Iron (211)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (211)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (211)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (211)
  • N Non-Ferrous Materials (211)
    • N1
      Wrought Aluminum
      (211)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (211)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (207)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (140)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (115)
    • N6
      Carbon, Graphite Composites, CFRP
      (115)
    • N7
      MMC's
      (140)
  • S High-Temp Alloys (66)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (66)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (66)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (66)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (59)
  • H Hardened Materials (37)
    • H1
      Hardened Materials 44-48 HRC
      (37)
    • H2
      Hardened Materials 48-55 HRC
      (37)
    • H3
      Hardened Materials 56-60 HRC
      (37)
    • H4
      Hardened Materials >60 HRC
      (37)
Select All Star
  • IN (1)
  • US (46)
Applications
Applications
  • Multiple Direction Cutting Multiple Direction Cutting (169)
  • Profiling Profiling (38)
  • TRN Boring TRN Boring (181)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (14)
  • Lightly Interrupted Cut (14)
  • Smooth Cut (138)
  • Varying Depth of Cut (138)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (2)
  • 60.0 (3)
  • 90.0 (45)
  • 93.0 (19)
  • 95.0 (140)
  • 97.0 (8)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (215)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (140)
  • 2.0 (87)
  • 3.0 (124)
  • 4.0 (6)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (78)
  • 0.004 in (15)
  • 0.005 in (3)
  • 0.007 in (186)
  • 0.008 in (18)
  • 0.015 in (186)
  • 0.016 in (81)
  • 0.031 in (66)
  • 0.063 in (25)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (78)
  • 0.1 mm (15)
  • 0.125 mm (3)
  • 0.176 mm (186)
  • 0.2 mm (18)
  • 0.375 mm (186)
  • 0.4 mm (81)
  • 0.775 mm (25)
  • 0.8 mm (66)
  • 1.6 mm (25)
Corner Radius Min komu Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • ALO (137)
  • C2 (59)
  • C25 (149)
  • C3 (34)
  • CBN6 (34)
  • CG5 (207)
  • CG55 (11)
  • CG6 (186)
  • CM1 (207)
  • CPD1 (59)
  • TN7 (183)
  • WBH10C (3)
  • WBH10P (3)
  • WBH10U (3)
  • WBH25P (3)
  • WBH30P (3)
  • WDN00U (3)
  • WDN10U (34)
  • WDN25U (81)
  • WK20CT (152)
  • WM15CT (7)
  • WM25CT (7)
  • WP15CT (7)
  • WP25CT (14)
Hand Of Tool
Hand Of Tool
  • L (47)
  • R (168)
Wiper Insert
Wiper Insert
  • N (211)
  • Y (3)
F Dimension
F Dimension
  • 0.576 mm (1)
  • 0.601 mm (1)
  • 1.401 mm (1)
  • 1.776 mm (3)
  • 2.401 mm (8)
  • 2.651 mm (17)
  • 2.825 mm (4)
  • 2.95 mm (7)
  • 2.975 mm (2)
  • 3.026 mm (5)
  • 3.1 mm (5)
  • 3.125 mm (1)
  • 3.176 mm (2)
  • 3.2 mm (10)
  • 3.401 mm (2)
  • 3.426 mm (1)
  • 3.6 mm (1)
  • 3.625 mm (1)
  • 3.676 mm (15)
  • 3.7 mm (3)
  • 3.725 mm (4)
  • 3.85 mm (4)
  • 3.95 mm (15)
  • 4.425 mm (3)
  • 4.7 mm (6)
  • 4.75 mm (14)
  • 4.801 mm (1)
  • 5.351 mm (3)
  • 5.551 mm (2)
  • 5.601 mm (9)
  • 5.65 mm (1)
  • 5.801 mm (6)
  • 6.0 mm (1)
  • 6.551 mm (1)
  • 6.801 mm (1)
  • 6.926 mm (3)
  • 7.075 mm (2)
  • 7.101 mm (1)
  • 7.301 mm (1)
  • 7.525 mm (10)
  • 8.125 mm (2)
  • 8.6 mm (3)
  • 8.65 mm (1)
  • 8.701 mm (1)
  • 8.75 mm (2)
  • 8.9 mm (1)
  • 8.975 mm (4)
  • 9.65 mm (3)
  • 9.976 mm (7)
  • 10.351 mm (2)
  • 11.675 mm (7)
  • 14.851 mm (4)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.023 in (1)
  • 0.024 in (1)
  • 0.055 in (1)
  • 0.07 in (3)
  • 0.095 in (8)
  • 0.105 in (17)
  • 0.111 in (4)
  • 0.116 in (7)
  • 0.117 in (2)
  • 0.12 in (5)
  • 0.122 in (5)
  • 0.123 in (1)
  • 0.125 in (2)
  • 0.126 in (10)
  • 0.134 in (2)
  • 0.135 in (1)
  • 0.143 in (1)
  • 0.144 in (1)
  • 0.145 in (15)
  • 0.146 in (3)
  • 0.147 in (4)
  • 0.152 in (4)
  • 0.156 in (15)
  • 0.175 in (3)
  • 0.185 in (6)
  • 0.187 in (14)
  • 0.189 in (1)
  • 0.211 in (3)
  • 0.219 in (2)
  • 0.221 in (9)
  • 0.222 in (1)
  • 0.228 in (6)
  • 0.237 in (1)
  • 0.258 in (1)
  • 0.268 in (1)
  • 0.273 in (3)
  • 0.279 in (2)
  • 0.28 in (1)
  • 0.288 in (1)
  • 0.296 in (10)
  • 0.32 in (2)
  • 0.339 in (3)
  • 0.341 in (1)
  • 0.343 in (1)
  • 0.345 in (2)
  • 0.351 in (1)
  • 0.353 in (4)
  • 0.38 in (3)
  • 0.393 in (7)
  • 0.409 in (2)
  • 0.46 in (7)
  • 0.585 in (4)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 4.575 mm (8)
  • 5.176 mm (8)
  • 5.275 mm (9)
  • 5.551 mm (4)
  • 5.7 mm (2)
  • 5.775 mm (1)
  • 5.801 mm (7)
  • 5.95 mm (11)
  • 6.2 mm (1)
  • 6.601 mm (2)
  • 6.775 mm (1)
  • 6.976 mm (10)
  • 7.051 mm (3)
  • 7.075 mm (2)
  • 7.101 mm (2)
  • 7.25 mm (17)
  • 7.426 mm (4)
  • 7.525 mm (16)
  • 8.8 mm (3)
  • 9.05 mm (6)
  • 9.1 mm (15)
  • 9.15 mm (1)
  • 9.976 mm (1)
  • 10.0 mm (1)
  • 10.351 mm (1)
  • 10.5 mm (3)
  • 10.675 mm (2)
  • 11.125 mm (13)
  • 11.15 mm (1)
  • 12.226 mm (2)
  • 12.5 mm (1)
  • 12.9 mm (1)
  • 13.15 mm (1)
  • 13.351 mm (2)
  • 13.675 mm (3)
  • 13.851 mm (1)
  • 14.3 mm (10)
  • 15.375 mm (1)
  • 15.4 mm (1)
  • 16.375 mm (3)
  • 16.975 mm (3)
  • 17.026 mm (1)
  • 17.1 mm (2)
  • 17.25 mm (1)
  • 17.276 mm (3)
  • 17.475 mm (1)
  • 18.3 mm (7)
  • 19.05 mm (2)
  • 20.25 mm (2)
  • 21.6 mm (7)
  • 24.6 mm (3)
  • 27.951 mm (4)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.18 in (8)
  • 0.205 in (8)
  • 0.209 in (9)
  • 0.219 in (4)
  • 0.224 in (2)
  • 0.227 in (1)
  • 0.228 in (7)
  • 0.234 in (11)
  • 0.244 in (1)
  • 0.26 in (2)
  • 0.267 in (1)
  • 0.275 in (10)
  • 0.278 in (3)
  • 0.279 in (2)
  • 0.28 in (2)
  • 0.286 in (17)
  • 0.292 in (4)
  • 0.296 in (16)
  • 0.347 in (3)
  • 0.356 in (6)
  • 0.358 in (15)
  • 0.36 in (1)
  • 0.393 in (1)
  • 0.394 in (1)
  • 0.409 in (1)
  • 0.414 in (3)
  • 0.42 in (2)
  • 0.438 in (13)
  • 0.439 in (1)
  • 0.481 in (2)
  • 0.492 in (1)
  • 0.508 in (1)
  • 0.518 in (1)
  • 0.526 in (2)
  • 0.538 in (3)
  • 0.545 in (1)
  • 0.564 in (10)
  • 0.605 in (1)
  • 0.606 in (1)
  • 0.645 in (3)
  • 0.668 in (3)
  • 0.67 in (1)
  • 0.673 in (2)
  • 0.679 in (1)
  • 0.68 in (3)
  • 0.689 in (1)
  • 0.72 in (7)
  • 0.75 in (2)
  • 0.797 in (2)
  • 0.85 in (7)
  • 0.969 in (3)
  • 1.1 in (4)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (138)
  • E (67)
  • P (7)
  • S (3)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (19)
  • NEUTRAL (ZERO) (26)
  • POSITIVE-ZERO (170)
Maximum Bore Depth
Maximum Bore Depth
  • 0.484 in (1)
  • 0.5 in (10)
  • 0.63 in (2)
  • 0.75 in (14)
  • 0.787 in (3)
  • 0.875 in (5)
  • 0.935 in (3)
  • 0.946 in (4)
  • 1.0 in (20)
  • 1.014 in (1)
  • 1.124 in (4)
  • 1.125 in (13)
  • 1.181 in (2)
  • 1.25 in (19)
  • 1.26 in (1)
  • 1.417 in (5)
  • 1.498 in (4)
  • 1.499 in (4)
  • 1.5 in (21)
  • 1.502 in (3)
  • 1.575 in (1)
  • 1.872 in (1)
  • 1.873 in (6)
  • 1.874 in (1)
  • 1.875 in (6)
  • 1.891 in (4)
  • 2.0 in (10)
  • 2.249 in (6)
  • 2.25 in (2)
  • 2.499 in (3)
  • 2.5 in (4)
  • 2.501 in (4)
  • 2.835 in (1)
  • 3.0 in (14)
  • 3.749 in (6)
  • 3.781 in (1)
  • 4.0 in (1)
  • 4.498 in (3)
  • 4.5 in (1)
  • 6.0 in (3)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 12.3 mm (1)
  • 12.701 mm (10)
  • 16.0 mm (2)
  • 19.05 mm (14)
  • 20.0 mm (3)
  • 22.225 mm (5)
  • 23.75 mm (3)
  • 24.0 mm (4)
  • 25.401 mm (20)
  • 25.725 mm (1)
  • 28.55 mm (4)
  • 28.576 mm (13)
  • 30.0 mm (2)
  • 31.75 mm (19)
  • 32.0 mm (1)
  • 36.0 mm (5)
  • 38.051 mm (4)
  • 38.075 mm (4)
  • 38.1 mm (21)
  • 38.125 mm (3)
  • 40.0 mm (1)
  • 47.551 mm (1)
  • 47.575 mm (6)
  • 47.6 mm (1)
  • 47.625 mm (6)
  • 48.0 mm (4)
  • 50.801 mm (10)
  • 57.125 mm (6)
  • 57.151 mm (2)
  • 63.475 mm (3)
  • 63.5 mm (4)
  • 63.526 mm (4)
  • 72.0 mm (1)
  • 76.2 mm (14)
  • 95.226 mm (6)
  • 96.0 mm (1)
  • 101.601 mm (1)
  • 114.25 mm (3)
  • 114.301 mm (1)
  • 152.4 mm (3)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • C (97)
  • S (109)
frontEnd
Clamp Style
Clamp Style
  • S (188)
Cutting Width
Cutting Width
  • 0.03 in (3)
  • 0.06 in (3)
Cutting Width Min komu Cutting Width Max
Cutting Width
Cutting Width
  • 0.75 mm (3)
  • 1.526 mm (3)
Cutting Width Min komu Cutting Width Max
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (87)
  • T-TRIANGLE 60 (107)
  • THREADING (3)
  • W-TRIGON 80 (19)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.062 in (1)
  • 0.075 in (1)
  • 0.103 in (1)
  • 0.125 in (5)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 1.576 mm (1)
  • 1.901 mm (1)
  • 2.6 mm (1)
  • 3.176 mm (5)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (3)
  • B L (37)
  • D P (140)
  • H T (183)
  • H W (208)
backEnd
Connection Type
Connection Type
  • BORING BAR (215)
Back-End Diameter
Back-End Diameter
  • 3.95 mm (3)
  • 4.0 mm (3)
  • 4.75 mm (22)
  • 4.775 mm (1)
  • 5.0 mm (5)
  • 6.0 mm (8)
  • 6.351 mm (17)
  • 7.926 mm (16)
  • 8.0 mm (4)