Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Máte otázku týkající se produktu?

Zobrazit úplný seznam globálních servisních odborníků podle specializace.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Zpět k řešení

Úprava řešení

Přidání řešení

Název řešení: {{SolutionName}}

Toolholders

Vybrat filtry
Filters
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (98)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (98)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (98)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (98)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (98)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (98)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (98)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (98)
  • M Stainless Steel (98)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (98)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (98)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (98)
  • K Cast Iron (98)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (98)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (98)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (98)
  • N Non-Ferrous Materials (98)
    • N1
      Wrought Aluminum
      (98)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (98)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (98)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (82)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (98)
    • N6
      Carbon, Graphite Composites, CFRP
      (98)
    • N7
      MMC's
      (82)
  • S High-Temp Alloys (98)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (98)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (98)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (98)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (98)
  • H Hardened Materials (53)
    • H1
      Hardened Materials 44-48 HRC
      (53)
    • H2
      Hardened Materials 48-55 HRC
      (53)
    • H3
      Hardened Materials 56-60 HRC
      (16)
    • H4
      Hardened Materials >60 HRC
      (16)
Select All Star
  • DE (3)
  • IN (1)
  • US (22)
Applications
Applications
  • Chamfer Turning Chamfer Turning (6)
  • Cut-Off Cut-Off (6)
  • Deep Grooving Deep Grooving (6)
  • Face Grooving Face Grooving (72)
  • Facing Facing (12)
  • Grooving Grooving (98)
  • ID Grooving ID Grooving (22)
  • ID Thread Turning ID Thread Turning (26)
  • Multiple Direction Cutting Multiple Direction Cutting (6)
  • OD Thread Turning OD Thread Turning (98)
  • Plunge Turning Plunge Turning (6)
  • Profiling Profiling (8)
  • TRN Boring TRN Boring (6)
  • Threading Threading (92)
  • Turning Turning (12)
Type of Thread
Type of Thread
  • 60 (95)
  • ACME (58)
  • API (16)
  • API RD (39)
  • BSW (27)
  • BUTTRESS (44)
  • M (20)
  • NPT (12)
  • STUB ACME (39)
  • UN (90)
  • UNJ (27)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (95)
  • Lightly Interrupted Cut (95)
  • Smooth Cut (95)
  • Varying Depth of Cut (95)
Connection Style
Connection Style
  • KM (28)
  • Toolholder (48)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (95)
  • 2.0 (97)
  • 4.0 (1)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (12)
  • 0.003 in (74)
  • 0.004 in (63)
  • 0.005 in (13)
  • 0.006 in (23)
  • 0.007 in (79)
  • 0.008 in (95)
  • 0.01 in (54)
  • 0.011 in (12)
  • 0.012 in (27)
  • 0.014 in (56)
  • 0.016 in (12)
  • 0.017 in (39)
  • 0.019 in (16)
  • 0.02 in (51)
  • 0.023 in (56)
  • 0.03 in (39)
  • 0.031 in (78)
  • 0.035 in (16)
  • 0.039 in (78)
  • 0.047 in (78)
  • 0.049 in (78)
  • 0.06 in (78)
  • 0.062 in (39)
  • 0.063 in (72)
  • 0.069 in (78)
  • 0.078 in (39)
  • 0.079 in (56)
  • 0.089 in (56)
  • 0.095 in (56)
  • 0.098 in (17)
  • 0.125 in (17)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (12)
  • 0.076 mm (74)
  • 0.1 mm (63)
  • 0.125 mm (13)
  • 0.151 mm (23)
  • 0.176 mm (79)
  • 0.2 mm (95)
  • 0.225 mm (27)
  • 0.25 mm (54)
  • 0.275 mm (12)
  • 0.301 mm (27)
  • 0.325 mm (56)
  • 0.351 mm (43)
  • 0.4 mm (12)
  • 0.426 mm (39)
  • 0.45 mm (16)
  • 0.476 mm (6)
  • 0.5 mm (51)
  • 0.576 mm (56)
  • 0.75 mm (39)
  • 0.775 mm (78)
  • 0.9 mm (16)
  • 1.0 mm (78)
  • 1.201 mm (78)
  • 1.25 mm (78)
  • 1.5 mm (78)
  • 1.576 mm (39)
  • 1.6 mm (72)
  • 1.75 mm (78)
  • 1.975 mm (39)
  • 2.0 mm (56)
  • 2.25 mm (56)
  • 2.401 mm (56)
  • 2.5 mm (17)
  • 3.176 mm (17)
Corner Radius Min komu Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K2885 (28)
  • K313 (32)
  • K420 (32)
  • K4H (20)
  • K68 (32)
  • KB1345 (16)
  • KB1630 (16)
  • KB5625 (12)
  • KBH20 (6)
  • KC250 (28)
  • KC5010 (32)
  • KC5025 (32)
  • KC5410 (32)
  • KC710 (32)
  • KC720 (32)
  • KC722 (32)
  • KC730 (32)
  • KC732 (12)
  • KC810 (32)
  • KC850 (32)
  • KC910 (20)
  • KC9110 (32)
  • KC9120 (12)
  • KC9320 (32)
  • KC935 (32)
  • KC950 (32)
  • KCK20 (24)
  • KCK20B (32)
  • KCP10B (32)
  • KCP25B (32)
  • KCU10 (32)
  • KCU25 (32)
  • KD050 (6)
  • KD081 (12)
  • KD100 (14)
  • KD120 (16)
  • KD1425 (12)
  • KT175 (28)
  • KT315 (32)
  • KU10T (32)
  • KU25T (32)
  • KU30T (32)
  • KY3000 (16)
  • THM (78)
  • TN10P (63)
  • TN6010 (95)
  • TN6025 (98)
  • TN7110 (95)
  • WU10HT (21)
  • WU10PT (33)
  • WU25PT (18)
Hand Of Tool
Hand Of Tool
  • L (30)
  • R (46)
Wiper Insert
Wiper Insert
  • N (98)
F Dimension
F Dimension
  • 11.0 mm (6)
  • 12.0 mm (1)
  • 12.701 mm (3)
  • 13.0 mm (2)
  • 14.275 mm (1)
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 17.0 mm (8)
  • 19.05 mm (1)
  • 20.0 mm (1)
  • 22.0 mm (4)
  • 25.0 mm (3)
  • 25.401 mm (6)
  • 27.0 mm (8)
  • 28.0 mm (1)
  • 31.75 mm (13)
  • 32.0 mm (7)
  • 38.1 mm (4)
  • 40.0 mm (2)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.433 in (6)
  • 0.473 in (1)
  • 0.5 in (3)
  • 0.512 in (2)
  • 0.562 in (1)
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.669 in (8)
  • 0.75 in (1)
  • 0.787 in (1)
  • 0.866 in (4)
  • 0.984 in (3)
  • 1.0 in (6)
  • 1.063 in (8)
  • 1.102 in (1)
  • 1.25 in (13)
  • 1.26 in (7)
  • 1.5 in (4)
  • 1.575 in (2)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (51)
  • 18.5 mm (2)
  • 20.0 mm (4)
  • 25.0 mm (2)
  • 32.0 mm (4)
  • 34.0 mm (4)
  • 40.0 mm (4)
  • 41.301 mm (24)
  • 47.6 mm (24)
  • 54.0 mm (6)
  • 55.875 mm (1)
  • 56.625 mm (2)
  • 57.2 mm (12)
  • 60.325 mm (1)
  • 63.5 mm (4)
  • 76.2 mm (1)
  • 88.9 mm (28)
  • 139.701 mm (24)
  • 174.601 mm (24)
  • 209.601 mm (12)
  • 222.3 mm (12)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (51)
  • 0.728 in (2)
  • 0.787 in (4)
  • 0.984 in (2)
  • 1.26 in (4)
  • 1.339 in (4)
  • 1.575 in (4)
  • 1.627 in (24)
  • 1.874 in (24)
  • 2.126 in (6)
  • 2.2 in (1)
  • 2.229 in (2)
  • 2.253 in (12)
  • 2.375 in (1)
  • 2.5 in (4)
  • 3.0 in (1)
  • 3.5 in (28)
  • 5.5 in (24)
  • 6.875 in (24)
  • 8.252 in (12)
  • 8.752 in (12)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (95)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (95)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (54)
  • S (22)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (1)
  • NEUTRAL (ZERO) (75)
Maximum Bore Depth
Maximum Bore Depth
  • 1.0 in (7)
  • 1.575 in (6)
  • 1.655 in (2)
  • 2.0 in (12)
  • 2.169 in (4)
  • 2.209 in (2)
  • 2.757 in (2)
  • 2.955 in (4)
  • 2.993 in (2)
  • 3.15 in (2)
  • 3.781 in (2)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 25.401 mm (7)
  • 40.0 mm (6)
  • 42.026 mm (2)
  • 50.801 mm (12)
  • 55.1 mm (4)
  • 56.1 mm (2)
  • 70.025 mm (2)
  • 75.05 mm (4)
  • 76.025 mm (2)
  • 80.0 mm (2)
  • 96.025 mm (2)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • C (2)
  • S (20)
frontEnd
Cutting Width
Cutting Width
  • 0.02 in (39)
  • 0.031 in (39)
  • 0.035 in (16)
  • 0.039 in (78)
  • 0.041 in (31)
  • 0.047 in (78)
  • 0.055 in (39)
  • 0.058 in (39)
  • 0.06 in (78)
  • 0.061 in (23)
  • 0.062 in (78)
  • 0.067 in (39)
  • 0.069 in (78)
  • 0.073 in (39)
  • 0.077 in (39)
  • 0.078 in (39)
  • 0.079 in (78)
  • 0.088 in (78)
  • 0.089 in (57)
  • 0.094 in (21)
  • 0.095 in (78)
  • 0.097 in (12)
  • 0.098 in (78)
  • 0.105 in (12)
  • 0.108 in (78)
  • 0.11 in (12)
  • 0.119 in (95)
  • 0.122 in (12)
  • 0.125 in (95)
  • 0.126 in (59)
  • 0.128 in (78)
  • 0.129 in (16)
  • 0.131 in (6)
  • 0.138 in (95)
  • 0.143 in (12)
  • 0.147 in (23)
  • 0.15 in (16)
  • 0.152 in (39)
  • 0.156 in (39)
  • 0.157 in (56)
  • 0.167 in (43)
  • 0.169 in (12)
  • 0.177 in (56)
  • 0.178 in (12)
  • 0.185 in (14)
  • 0.188 in (50)
  • 0.189 in (56)
  • 0.192 in (21)
  • 0.193 in (6)
  • 0.195 in (39)
  • 0.197 in (17)
  • 0.202 in (4)
  • 0.213 in (4)
  • 0.217 in (17)
  • 0.219 in (4)
  • 0.237 in (17)
  • 0.25 in (17)
  • 0.255 in (4)
Cutting Width Min komu Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (39)
  • 0.775 mm (39)
  • 0.8 mm (39)
  • 0.9 mm (16)
  • 1.0 mm (78)
  • 1.05 mm (31)
  • 1.201 mm (78)
  • 1.401 mm (39)
  • 1.475 mm (39)
  • 1.5 mm (78)
  • 1.55 mm (23)
  • 1.576 mm (78)
  • 1.701 mm (39)
  • 1.75 mm (78)
  • 1.826 mm (39)
  • 1.951 mm (39)
  • 1.975 mm (39)
  • 2.0 mm (78)
  • 2.2 mm (78)
  • 2.225 mm (43)
  • 2.25 mm (57)
  • 2.375 mm (21)
  • 2.401 mm (78)
  • 2.475 mm (12)
  • 2.5 mm (78)
  • 2.676 mm (12)
  • 2.75 mm (78)
  • 2.801 mm (12)
  • 3.0 mm (95)
  • 3.1 mm (12)
  • 3.176 mm (95)
  • 3.2 mm (59)
  • 3.25 mm (78)
  • 3.276 mm (16)
  • 3.325 mm (6)
  • 3.5 mm (95)
  • 3.6 mm (12)
  • 3.725 mm (23)
  • 3.801 mm (16)
  • 3.85 mm (39)
  • 3.95 mm (39)
  • 3.975 mm (21)
  • 4.0 mm (56)
  • 4.25 mm (43)
  • 4.3 mm (12)
  • 4.5 mm (56)
  • 4.525 mm (12)
  • 4.7 mm (14)
  • 4.775 mm (50)
  • 4.801 mm (56)
  • 4.875 mm (21)
  • 4.9 mm (6)
  • 4.95 mm (39)
  • 5.0 mm (17)
  • 5.125 mm (4)
  • 5.4 mm (4)
  • 5.5 mm (17)
  • 5.575 mm (4)
  • 6.0 mm (17)
  • 6.351 mm (17)
  • 6.476 mm (4)
Cutting Width Min komu Cutting Width Max
Insert Size
Insert Size
  • 1 (1)
  • 2 (41)
  • 3 (41)
  • 4 (14)
  • 6 (1)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.138 in (35)
  • 0.21 in (35)
  • 0.225 in (1)
  • 0.24 in (1)
  • 0.294 in (15)
  • 0.334 in (2)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 3.5 mm (35)
  • 5.325 mm (35)
  • 5.726 mm (1)
  • 6.101 mm (1)
  • 7.476 mm (15)
  • 8.475 mm (2)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (16)
  • B L (12)
  • C N (16)
  • D P (14)
  • H T (32)
  • H W (98)
backEnd
Connection Type
Connection Type
  • SQUARE SHANK (48)
  • TAPER SHANK (28)
System Size
System Size
  • KM40TS (28)
Back-End Diameter
Back-End Diameter
  • 40.0 mm (32)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 1.575 in (32)
Back-End Diameter Min komu Back-End Diameter Max
Shank Height
Shank Height
  • 0.375 in (1)
  • 0.473 in (2)
  • 0.5 in (4)
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.75 in (6)
  • 0.787 in (4)
  • 0.984 in (7)
  • 1.0 in (12)
  • 1.25 in (5)
  • 1.26 in (2)
Shank Height Min komu Shank Height Max