New Customer
Are you new to WIDIA? Create an account and get started.
Create AccountRegistered Customer
Already have an account? Sign in.
Sign InSold-to Account
You are currently using the following account for your cart and purchases:
New Customer
Are you new to WIDIA? Create an account and get started.
Create AccountRegistered Customer
Already have an account? Sign in.
Sign InSold-to Account
You are currently using the following account for your cart and purchases:
HNPJ-HD • HN0704
15°/75° • 45°• 30°/60° Inserts • HNPJ-HD
Workpiece Materials
K
P
M
S
H
N
Filters and Columns
Filters
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
-
P Steel (10)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(8)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(8)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(8)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(8)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(8)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(10)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(10)
-
-
M Stainless Steel (10)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(10)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(10)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(10)
-
-
K Cast Iron (12)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(12)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(12)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(12)
-
-
N Non-Ferrous Materials (2)
-
N1Wrought Aluminum(2)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(2)
-
N3High-Silicon Aluminum Alloys Si >12.2%(2)
-
-
S High-Temp Alloys (8)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(7)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(7)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(7)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(8)
-
-
H Hardened Materials (1)
-
H1Hardened Materials 44-48 HRC(1)
-
Select First Choice
-
DE (7)
-
IN (1)
-
US (3)
Applications
-
ID Thread Turning (16)
Cutting Edges Per Insert
-
12.0 (16)
to
Corner Radius
-
1.2 (10)
-
3.2 (6)
to
Corner Radius
-
0.0469 (8)
-
0.0472 (2)
-
0.126 (6)
to
Application
Grade Of Cutting Tool
-
TN5515 (1)
-
TN6510 (2)
-
TN6520 (2)
-
TN6540 (2)
-
TN7535 (2)
-
WK15CM (1)
-
WP25PM (1)
-
WP35CM (1)
-
WP40PM (2)
-
WS40PM (2)
Wiper Insert
-
N (16)
Front-End
Insert Shape
-
H-HEXAGON 120 (16)
Insert Geometry
Shape
-
H-HEXAGON 120 (16)
Insert IC Size
-
0.5 (16)
to
Insert IC Size
-
12.7 (16)
to
Cutting Edge Length
-
0.269 (16)
to
Cutting Edge Length
-
6.8 (16)
to
Cutting Tool Material
-
H W (16)
Chip Breaker CBMD
-
HD (16)
Tolerance Class
-
P (16)
other
Grade
-
TN5515 (1)
-
TN6510 (2)
-
TN6520 (2)
-
TN6540 (2)
-
TN7535 (2)
-
WK15CM (1)
-
WP25PM (1)
-
WP35CM (1)
-
WP40PM (2)
-
WS40PM (2)
Platform
-
M1200 Series (15)
Tool Unit
-
I (16)
-
M (16)
Insert Hand
-
N (16)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1- 10
of 16 results
Metric
Inch
Show
Metric
Inch
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | First Choice | Grade | Cutting Edges per Insert | [D] Insert IC Size | [D] Insert IC Size | [L10] Insert Cutting Edge Length | [L10] Insert Cutting Edge Length | [S] Insert Thickness | [S] Insert Thickness | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5895297 | HNPJ070432ANSNHD | HNPJ070432ANSNHD | WP40PM | 12 | 12.7000 | .5000 | 6.8000 | .2690 | 4.4200 | .1741 |
|
|
| 6180311 | HNPJ070432ANSNHD | HNPJ070432ANSNHD | WS40PM | 12 | 12.7000 | .5000 | 6.8000 | .2690 | 4.4200 | .1741 |
|
|
| 3954484 | HNPJ070432ANSNHD | HNPJ070432ANSNHD | TN7535 | 12 | 12.7000 | .5000 | 6.8000 | .2690 | 4.4200 | .1741 |
|
|
| 3954479 | HNPJ0704ANSNHD | HNPJ0704ANSNHD | TN6540 | 12 | 12.7000 | .5000 | 6.8000 | .2690 | 4.4070 | .1735 |
|
|
| 5895295 | HNPJ0704ANSNHD | HNPJ0704ANSNHD | WP25PM | 12 | 12.7000 | .5000 | 6.8000 | .2690 | 4.4070 | .1735 |
|
|
| 5427375 | HNPJ0704ANSNHD | HNPJ0704ANSNHD | WK15CM | 12 | 12.7000 | .5000 | 6.8000 | .2690 | 4.4100 | .1735 |
|
|
| 5550907 | HNPJ0704ANSNHD | HNPJ0704ANSNHD | WP40PM | 12 | 12.7000 | .5000 | 6.8000 | .2690 | 4.4100 | .1735 |
|
|
| 5895296 | HNPJ0704ANSNHD | HNPJ0704ANSNHD | WP35CM | 12 | 12.7000 | .5000 | 6.8000 | .2690 | 4.4070 | .1735 |
|
|
| 6180299 | HNPJ0704ANSNHD | HNPJ0704ANSNHD | WS40PM | 12 | 12.7000 | .5000 | 6.8000 | .2690 | 4.4070 | .1735 |
|
|
| 3954482 | HNPJ070432ANSNHD | HNPJ070432ANSNHD | TN6520 | 12 | 12.7000 | .5000 | 6.8000 | .2690 | 4.4200 | .1741 |
|
|
| 3954483 | HNPJ070432ANSNHD | HNPJ070432ANSNHD | TN6540 | 12 | 12.7000 | .5000 | 6.8000 | .2690 | 4.4200 | .1741 |
|
|
| 3954481 | HNPJ070432ANSNHD | HNPJ070432ANSNHD | TN6510 | 12 | 12.7000 | .5000 | 6.8000 | .2690 | 4.4200 | .1741 |
|
|
| 3954478 | HNPJ0704ANSNHD | HNPJ0704ANSNHD | TN6520 | 12 | 12.7000 | .5000 | 6.8000 | .2690 | 4.4070 | .1735 |
|
|
| 3954476 | HNPJ0704ANSNHD | HNPJ0704ANSNHD | TN5515 | 12 | 12.7000 | .5000 | 6.8000 | .2690 | 4.4070 | .1735 |
|
|
| 3954480 | HNPJ0704ANSNHD | HNPJ0704ANSNHD | TN7535 | 12 | 12.7000 | .5000 | 6.8000 | .2690 | 4.4070 | .1735 |
|
|
| 3954477 | HNPJ0704ANSNHD | HNPJ0704ANSNHD | TN6510 | 12 | 12.7000 | .5000 | 6.8000 | .2690 | 4.4070 | .1735 |
|
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty
Grades
-
TN5515
Coated carbide grade TN5515 has an MT-CVD-TiN-TiCN-Al203 coating. Engineered for a
balanced toughness and wear ratio. Ideal for light to medium machining of all cast irons.
K -
TN6510
Coated carbide grade TN6510 has a PVD-TiAlN multilayer. It performs well in light to medium
machining of all cast irons.
K -
TN6520
Grade TN6520 has a PVD-TiAlN multilayer. It is engineeered for light and medium machining of all
types of cast irons.
K -
TN6540
Coated carbide grade TN6540 has a PVD-TiAlN multilayer and is excellent for medium and heavy
machining applications. It is ideal for use in all steels and nodular cast irons.
PMKS -
TN7535PMK
-
WK15CMK
-
WP25PMPMKSH
-
WP35CMPMKS
-
WP40PMPMS
-
WS40PMPMNS
Insert Selection Guide
| Material Group | LightMachining | GeneralPurpose | HeavyMachining | |||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1–P2 | .E..LD | WP40PM | .S..GD | WP40PM | .S..HD | WP40PM |
| P3–P4 | .E..LD | WP25PM | .S..GD | WP35CM | .S..HD | WP35CM |
| P5–P6 | .E..LD | WP25PM | .S..GD | WP35CM | .S..HD | WP35CM |
| M1–M2 | .E..LD | WP25PM | .S..GD | WP25PM | .S..HD | WP25PM |
| M3 | .E..LD | WP35CM | .S..GD | WP35CM | .S..HD | WP35CM |
| K1–K2 | .E..LD | TN6510 | .S..GD | WK15CM | .S..HD | WK15CM |
| K3 | .E..LD | WP35CM | .S..GD | WP35CM | .S..HD | WP35CM |
| N1–N2 | .F..LDJ | TN6501 | .F..LDJ | TN6501 | .F..LDJ | TN6501 |
| N3 | .F..LDJ | TN6501 | .F..LDJ | TN6501 | .F..LDJ | TN6501 |
| S1–S2 | .E..LD | WS30PM | .S..GD | WS30PM | .S..HD | WP25PM |
| S3 | .E..LD | WS30PM | .S..GD | WS30PM | .S..GD | WS30PM |
| S4 | .E..LD | WS30PM | .S..GD | WS30PM | .S..HD | WP40PM |
| H1 | ||||||
Recommended Starting Feeds [mm]
| Insert Geometry | Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40100% | ||||||||||||
| .F..LDJ | 0,48 | 0,89 | 1,81 | 0,34 | 0,64 | 1,29 | 0,26 | 0,48 | 0,96 | 0,22 | 0,42 | 0,83 | 0,21 | 0,38 | 0,76 | .F..LDJ |
| .E..LD | 0,48 | 1,38 | 2,85 | 0,34 | 0,99 | 2,00 | 0,26 | 0,74 | 1,48 | 0,22 | 0,64 | 1,28 | 0,21 | 0,59 | 1,17 | .E..LD |
| .S..GD | 0,92 | 2,35 | 3,89 | 0,66 | 1,67 | 2,70 | 0,49 | 1,23 | 1,98 | 0,43 | 1,07 | 1,72 | 0,39 | 0,98 | 1,57 | .S..GD |
| .S..HD | 0,92 | 2,35 | 3,89 | 0,66 | 1,67 | 2,70 | 0,49 | 1,23 | 1,98 | 0,43 | 1,07 | 1,72 | 0,39 | 0,98 | 1,57 | .S..HD |
| LightMachining | GeneralPurpose | HeavyMachining |
Recommended Starting Feeds [IPT]
| Insert Geometry | Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40100% | ||||||||||||
| .F..LDJ | .019 | .035 | .072 | .014 | .025 | .051 | .010 | .019 | .038 | .009 | .016 | .033 | .008 | .015 | .030 | .F..LDJ |
| .E..LD | .019 | .055 | .112 | .014 | .039 | .079 | .010 | .029 | .058 | .009 | .025 | .051 | .008 | .023 | .046 | .E..LD |
| .S..GD | .036 | .093 | .153 | .026 | .066 | .106 | .019 | .049 | .078 | .017 | .042 | .068 | .015 | .039 | .062 | .S..GD |
| .S..HD | .036 | .093 | .153 | .026 | .066 | .106 | .019 | .049 | .078 | .017 | .042 | .068 | .015 | .039 | .062 | .S..HD |
| LightMachining | GeneralPurpose | HeavyMachining |
Recommended Starting Speeds [m/min]
| Material Group | TN6510 | TN6520 | TN6525 | TN6540 | TN7535 | WK15CM | |||||||||||||
| P | 1 | – | – | – | – | – | – | 410 | 320 | 280 | 360 | 280 | 240 | 545 | 475 | 445 | – | – | – |
| 2 | – | – | – | – | – | – | 320 | 250 | 215 | 250 | 190 | 170 | 335 | 305 | 275 | – | – | – | |
| 3 | – | – | – | – | – | – | 280 | 215 | 185 | 215 | 170 | 140 | 305 | 275 | 245 | – | – | – | |
| 4 | – | – | – | – | – | – | 235 | 170 | 145 | 180 | 130 | 110 | 230 | 210 | 190 | – | – | – | |
| 5 | – | – | – | – | – | – | 310 | 235 | 200 | 240 | 180 | 150 | 310 | 275 | 250 | – | – | – | |
| 6 | – | – | – | – | – | – | 205 | 160 | 130 | 160 | 120 | 100 | 190 | 160 | 130 | – | – | – | |
| M | 1 | – | – | – | – | – | – | 190 | 120 | 80 | 130 | 80 | 60 | 245 | 220 | 185 | – | – | – |
| 2 | – | – | – | – | – | – | 120 | 80 | 50 | 80 | 50 | 40 | 220 | 190 | 170 | – | – | – | |
| 3 | – | – | – | – | – | – | 125 | 80 | 55 | 85 | 50 | 40 | 175 | 155 | 140 | – | – | – | |
| K | 1 | 480 | 350 | 260 | 450 | 320 | 230 | 275 | 245 | 220 | 220 | 205 | 180 | 355 | 320 | 290 | 505 | 460 | 410 |
| 2 | 420 | 280 | 205 | 390 | 250 | 190 | 215 | 190 | 180 | 175 | 155 | 140 | 280 | 250 | 230 | 400 | 355 | 330 | |
| 3 | 335 | 260 | 200 | 300 | 230 | 160 | 180 | 160 | 145 | 155 | 145 | 125 | 235 | 210 | 190 | 335 | 300 | 275 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 50 | 35 | 30 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 25 | 20 | 10 | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 70 | 40 | 30 | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 60 | 30 | 25 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | WP25PM | WP35CM | WP40PM | WS30PM | WS40PM | TN6501 | THM-U | |||||||||||||||
| P | 1 | 395 | 340 | 325 | 545 | 475 | 445 | 355 | 310 | 295 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 330 | 290 | 240 | 335 | 305 | 275 | 300 | 260 | 215 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 305 | 260 | 210 | 305 | 275 | 245 | 275 | 235 | 190 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | 270 | 220 | 180 | 230 | 210 | 190 | 245 | 205 | 160 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 5 | 220 | 205 | 180 | 310 | 275 | 250 | 205 | 185 | 160 | – | – | – | 205 | 175 | 145 | – | – | – | – | – | – | |
| 6 | 200 | 150 | 120 | 190 | 160 | 130 | 180 | 140 | 110 | – | – | – | 180 | 130 | 95 | – | – | – | – | – | – | |
| M | 1 | 245 | 215 | 200 | 245 | 220 | 185 | 235 | 205 | 185 | 270 | 240 | 220 | 250 | 205 | 170 | – | – | – | – | – | – |
| 2 | 220 | 190 | 155 | 220 | 190 | 170 | 210 | 180 | 150 | 245 | 215 | 175 | 215 | 175 | 145 | – | – | – | – | – | – | |
| 3 | 170 | 145 | 115 | 175 | 155 | 140 | 155 | 140 | 110 | 185 | 160 | 125 | 175 | 130 | 100 | – | – | – | – | – | – | |
| K | 1 | 275 | 245 | 220 | 355 | 320 | 290 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 215 | 190 | 180 | 280 | 250 | 230 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 180 | 160 | 145 | 235 | 210 | 190 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 2400 | 1440 | 1200 | 2400 | 1440 | 1200 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1640 | 980 | 800 | 1640 | 980 | 800 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 960 | 600 | 480 | 960 | 600 | 480 | |
| S | 1 | 50 | 40 | 30 | – | – | – | 50 | 40 | 35 | 55 | 50 | 35 | 50 | 40 | 30 | – | – | – | – | – | – |
| 2 | 50 | 40 | 30 | – | – | – | 50 | 40 | 35 | 55 | 50 | 35 | 50 | 40 | 30 | – | – | – | – | – | – | |
| 3 | 60 | 50 | 30 | – | – | – | 60 | 50 | 35 | 65 | 55 | 35 | 60 | 50 | 30 | – | – | – | – | – | – | |
| 4 | 85 | 60 | 40 | 80 | 60 | 40 | 80 | 60 | 40 | 100 | 70 | 50 | 70 | 60 | 35 | – | – | – | – | – | – | |
| H | 1 | 145 | 110 | 85 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
Recommended Starting Speeds [SFM]
| Material Group | TN6510 | TN6520 | TN6525 | TN6540 | TN7535 | WK15CM | |||||||||||||
| P | 1 | – | – | – | – | – | – | 1340 | 1045 | 925 | 1180 | 925 | 785 | 1790 | 1555 | 1460 | – | – | – |
| 2 | – | – | – | – | – | – | 1045 | 830 | 710 | 830 | 630 | 550 | 1105 | 1000 | 905 | – | – | – | |
| 3 | – | – | – | – | – | – | 925 | 710 | 610 | 710 | 550 | 450 | 1000 | 905 | 805 | – | – | – | |
| 4 | – | – | – | – | – | – | 770 | 550 | 475 | 590 | 430 | 355 | 750 | 690 | 630 | – | – | – | |
| 5 | – | – | – | – | – | – | 1025 | 770 | 650 | 785 | 590 | 490 | 1025 | 905 | 830 | – | – | – | |
| 6 | – | – | – | – | – | – | 670 | 535 | 430 | 535 | 395 | 335 | 630 | 535 | 430 | – | – | – | |
| M | 1 | – | – | – | – | – | – | 630 | 395 | 260 | 430 | 260 | 200 | 805 | 725 | 610 | – | – | – |
| 2 | – | – | – | – | – | – | 395 | 260 | 155 | 260 | 155 | 140 | 725 | 630 | 550 | – | – | – | |
| 3 | – | – | – | – | – | – | 415 | 260 | 180 | 275 | 155 | 140 | 570 | 510 | 450 | – | – | – | |
| K | 1 | 1570 | 1140 | 845 | 1475 | 1045 | 750 | 905 | 805 | 725 | 725 | 670 | 590 | 1165 | 1045 | 940 | 1655 | 1520 | 1340 |
| 2 | 1380 | 925 | 670 | 1280 | 830 | 630 | 710 | 630 | 590 | 570 | 510 | 450 | 925 | 830 | 750 | 1320 | 1165 | 1080 | |
| 3 | 1105 | 845 | 650 | 985 | 750 | 535 | 590 | 535 | 475 | 510 | 475 | 415 | 770 | 690 | 630 | 1105 | 985 | 905 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 155 | 120 | 95 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 80 | 60 | 40 | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 235 | 140 | 95 | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 200 | 95 | 80 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | WP25PM | WP35CM | WS30PM | WP40PM | TN6501 | THM-U | |||||||||||||
| P | 1 | 1295 | 1120 | 1060 | 1790 | 1555 | 1460 | – | – | – | 1165 | 1025 | 965 | – | – | – | – | – | – |
| 2 | 1080 | 940 | 785 | 1105 | 1000 | 905 | – | – | – | 985 | 845 | 710 | – | – | – | – | – | – | |
| 3 | 1000 | 845 | 690 | 1000 | 905 | 805 | – | – | – | 905 | 770 | 630 | – | – | – | – | – | – | |
| 4 | 890 | 725 | 590 | 750 | 690 | 630 | – | – | – | 805 | 670 | 535 | – | – | – | – | – | – | |
| 5 | 725 | 670 | 590 | 1025 | 905 | 830 | – | – | – | 670 | 610 | 535 | – | – | – | – | – | – | |
| 6 | 650 | 490 | 395 | 630 | 535 | 430 | – | – | – | 590 | 450 | 355 | – | – | – | – | – | – | |
| M | 1 | 805 | 710 | 650 | 805 | 725 | 610 | 890 | 785 | 725 | 770 | 670 | 610 | – | – | – | – | – | – |
| 2 | 725 | 630 | 510 | 725 | 630 | 550 | 805 | 710 | 570 | 690 | 590 | 490 | – | – | – | – | – | – | |
| 3 | 550 | 475 | 370 | 570 | 510 | 450 | 610 | 535 | 415 | 510 | 450 | 355 | – | – | – | – | – | – | |
| K | 1 | 905 | 805 | 725 | 1165 | 1045 | 940 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 710 | 630 | 590 | 925 | 830 | 750 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 590 | 535 | 475 | 770 | 690 | 630 | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 7870 | 4720 | 3935 | 7870 | 4720 | 3935 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 5370 | 3210 | 2615 | 5370 | 3210 | 2615 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 3150 | 1970 | 1570 | 3150 | 1970 | 1570 | |
| S | 1 | 155 | 140 | 95 | – | – | – | 180 | 155 | 120 | 155 | 140 | 120 | – | – | – | – | – | – |
| 2 | 155 | 140 | 95 | – | – | – | 180 | 155 | 120 | 155 | 140 | 120 | – | – | – | – | – | – | |
| 3 | 200 | 155 | 95 | – | – | – | 215 | 180 | 120 | 200 | 155 | 120 | – | – | – | – | – | – | |
| 4 | 275 | 200 | 140 | 260 | 200 | 130 | 335 | 235 | 155 | 260 | 200 | 140 | – | – | – | – | – | – | |
| H | 1 | 475 | 355 | 275 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
.png)
