Product Suggestions

Product Family suggestions

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read

Additional Inserts

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (74)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (74)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (74)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (74)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (74)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (74)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (66)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (66)
  • M Stainless Steel (66)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (66)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (66)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (66)
  • K Cast Iron (98)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (98)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (98)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (98)
  • N Non-Ferrous Materials (51)
    • N1
      Wrought Aluminum
      (51)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (51)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (51)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (2)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (2)
  • S High-Temp Alloys (60)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (37)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (37)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (37)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (60)
  • H Hardened Materials (28)
    • H1
      Hardened Materials 44-48 HRC
      (28)
Select All Star
  • DE (39)
  • IN (68)
  • US (3)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (7)
  • 2.0 (12)
  • 3.0 (33)
  • 4.0 (53)
  • 6.0 (1)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Corner configuration
Corner Radius
Corner Radius
  • 0.0 in (78)
  • 0.03 in (3)
  • 0.031 in (9)
  • 0.044 in (1)
  • 0.06 in (2)
  • 0.063 in (5)
  • 0.125 in (2)
  • 0.197 in (2)
  • 0.237 in (2)
  • 0.315 in (1)
  • 1.969 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (78)
  • 0.75 mm (3)
  • 0.8 mm (9)
  • 1.1 mm (1)
  • 1.5 mm (2)
  • 1.6 mm (5)
  • 3.176 mm (2)
  • 5.0 mm (2)
  • 6.0 mm (2)
  • 8.0 mm (1)
  • 50.0 mm (1)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (50)
  • 0.701 mm (6)
  • 0.75 mm (4)
  • 1.0 mm (2)
  • 1.026 mm (5)
  • 1.05 mm (1)
  • 1.175 mm (3)
  • 1.201 mm (4)
  • 1.25 mm (3)
  • 1.401 mm (8)
  • 1.475 mm (13)
  • 1.5 mm (6)
  • 2.575 mm (1)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (50)
  • 0.028 in (6)
  • 0.03 in (4)
  • 0.039 in (2)
  • 0.04 in (5)
  • 0.041 in (1)
  • 0.046 in (3)
  • 0.047 in (4)
  • 0.049 in (3)
  • 0.055 in (8)
  • 0.058 in (13)
  • 0.06 in (6)
  • 0.101 in (1)
Corner Chamfer Min to Corner Chamfer Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (20)
  • THM-F (2)
  • THR (1)
  • TN6525 (3)
  • TN6540 (8)
  • TTI25 (4)
  • TTM08 (7)
  • TTM09 (1)
  • WK15CM (9)
  • WP35CM (23)
  • WU20PM (28)
Wiper Insert
Wiper Insert
  • N (101)
  • Y (5)
Front-End
Insert Shape
Insert Shape
  • A-PARALLELOGRAM 90 (12)
  • L-RECTANGLE 90 (3)
  • R-ROUND (5)
  • S-SQUARE 90 (52)
  • T-TRIANGLE 60 (34)
Insert Geometry
Shape
Shape
  • A-PARALLELOGRAM 90 (12)
  • L-RECTANGLE 90 (3)
  • R-ROUND (5)
  • S-SQUARE 90 (52)
  • T-TRIANGLE 60 (34)
Insert IC Size
Insert IC Size
  • 6.351 mm (3)
  • 9.525 mm (14)
  • 10.0 mm (2)
  • 12.0 mm (2)
  • 12.701 mm (57)
  • 13.0 mm (1)
  • 13.4 mm (2)
  • 15.875 mm (9)
  • 16.0 mm (1)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.25 in (3)
  • 0.375 in (14)
  • 0.394 in (2)
  • 0.473 in (2)
  • 0.5 in (57)
  • 0.512 in (1)
  • 0.528 in (2)
  • 0.625 in (9)
  • 0.63 in (1)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 10.601 mm (1)
  • 10.951 mm (2)
  • 11.0 mm (1)
  • 11.101 mm (1)
  • 11.201 mm (1)
  • 12.701 mm (39)
  • 13.4 mm (2)
  • 15.0 mm (2)
  • 15.875 mm (9)
  • 16.45 mm (8)
  • 16.5 mm (6)
  • 17.0 mm (1)
  • 21.951 mm (15)
  • 22.0 mm (1)
  • 22.5 mm (1)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.417 in (1)
  • 0.431 in (2)
  • 0.433 in (1)
  • 0.437 in (1)
  • 0.441 in (1)
  • 0.5 in (39)
  • 0.528 in (2)
  • 0.591 in (2)
  • 0.625 in (9)
  • 0.648 in (8)
  • 0.65 in (6)
  • 0.669 in (1)
  • 0.864 in (15)
  • 0.866 in (1)
  • 0.886 in (1)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • CA (1)
  • M0 (2)
  • M0T (1)
  • MM (12)
  • MS (14)
Cutting Tool Material
Cutting Tool Material
  • H T (4)
  • H W (101)
Tolerance Class
Tolerance Class
  • A (25)
  • C (5)
  • H (1)
  • K (56)
  • M (7)
  • P (12)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

General Milling Inserts

ADPT Inserts
(1 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [W] Insert Width [W] Insert Width [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius
4071302 ADPT150508ERMM ADPT150508ERMM TN6540   2 9.6500 .3800 16.1200 .6350 5.8420 .2300 2.1300 .0840 0.7900 .0310
    List price:
    $17,76 /each.
    Your price::
    List price:
    Discount: %
    Your price::
    Replacement This item is no longer available
    Replacement Product Please contact customer service for assistance

    ORIGINAL PRODUCT

    General Milling Inserts

    APPT Inserts
    (6 Products)
    View Products
    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [W] Insert Width [W] Insert Width [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius
    4071254 APPT160408PDERMM APPT160408PDERMM TN6540   2 9.4300 .3710 17.2400 .6790 5.2600 .2070 1.4700 .0580 0.7900 .0310
      List price:
      $17,76 /each.
      Your price::
      4071256 APPT160408PDSRMM APPT160408PDSRMM TN6525   2 9.4100 .3710 17.2000 .6770 5.2600 .2070 1.4900 .0590 0.7900 .0310
        List price:
        $17,76 /each.
        Your price::
        4071257 APPT160408PDSRMM APPT160408PDSRMM TN6540   2 9.4100 .3710 17.2000 .6770 5.2600 .2070 1.4900 .0590 0.7900 .0310
          List price:
          $17,76 /each.
          Your price::
          4071259 APPT160416PDERMM APPT160416PDERMM TN6540   2 9.4300 .3710 17.2200 .6780 5.2700 .2070 1.4300 .0560 1.5900 .0620
            List price:
            $17,76 /each.
            Your price::
            4071264 APPT160432PDERMM APPT160432PDERMM TN6525   2 9.4380 .3716 16.8660 .6640 5.2590 .2071     3.1750 .1250
              List price:
              $17,76 /each.
              Your price::
              4071265 APPT160432PDERMM APPT160432PDERMM TN6540   2 9.4380 .3716 16.8660 .6640 5.2590 .2071     3.1750 .1250
                List price:
                $17,76 /each.
                Your price::
                List price:
                Discount: %
                Your price::
                Replacement This item is no longer available
                Replacement Product Please contact customer service for assistance

                ORIGINAL PRODUCT

                General Milling Inserts

                M68 Series Inserts • SE1203..
                (6 Products)
                View Products
                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [M] Gage Dimension [M] Gage Dimension [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length Average Chip Thickness [HM] Average Chip Thickness [HM]
                2415793 SEKR1203AFNMS SEKR1203AFNMS WU20PM   4 12.7000 .5000 12.7000 .5000 1.6550 .0652 3.1000 .1220 1.6500 .0650 0.0450 .0018
                  List price:
                  $7,74 /each.
                  Your price::
                  6901194 SEKR1203AFNMS SEKR42AFNMS WP35CM   4 12.7000 .5000 12.7000 .5000 1.6550 .0652 3.1000 .1220 1.6500 .0650 0.0400 .0016
                    List price:
                    $21,20 /each.
                    Your price::
                    2012927 SEKR1203AFNMS SEKR1203AFNMS THR   4 12.7000 .5000 12.7000 .5000 1.6550 .0652 3.1000 .1220 1.6500 .0650 0.1400 .0055
                      List price:
                      $17,38 /each.
                      Your price::
                      2012929 SEKR1203AFNMS SEKR1203AFNMS TTM08   4 12.7000 .5000 12.7000 .5000 1.6550 .0652 3.1000 .1220 1.6500 .0650 0.1400 .0055
                        List price:
                        $17,38 /each.
                        Your price::
                        6856937 SEKR1204AFNMS SEKR43AFNMS WP35CM   4 12.7000 .5000 12.7000 .5000 1.6550 .0652 4.7600 .1875 1.6500 .0650    
                          List price:
                          $21,20 /each.
                          Your price::
                          6901200 SEKR1504AFNMS SEKR53AFNMS WP35CM   4 15.8750 .6250 15.8800 .6250 2.2500 .0886 4.7600 .1875 1.9000 .0748 0.1330 .0052
                            List price:
                            $24,06 /each.
                            Your price::
                            List price:
                            Discount: %
                            Your price::
                            Replacement This item is no longer available
                            Replacement Product Please contact customer service for assistance

                            ORIGINAL PRODUCT

                            General Milling Inserts

                            M68 Series Inserts • SE1203..
                            (9 Products)
                            View Products
                            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [M] Gage Dimension [M] Gage Dimension [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length Average Chip Thickness [HM] Average Chip Thickness [HM]
                            2562668 SEKN1203AFN SEKN1203AFN THM   4 12.7000 .5000 12.7000 .5000 1.6550 .0652 3.1800 .1250 1.6490 .0649 0.0200 .0008
                              List price:
                              $7,42 /each.
                              Your price::
                              2203123 SEKN1203AFN SEKN1203AFN WU20PM   4 12.7000 .5000 12.7000 .5000 1.6550 .0652 3.1800 .1250 1.6490 .0649 0.0450 .0018
                                List price:
                                $7,74 /each.
                                Your price::
                                6877205 SEKN1203AFN SEKN1203AFN WP35CM   4 12.7000 .5000 12.7000 .5000 1.6550 .0652 3.1800 .1250 1.6490 .0649 0.0500 .0020
                                  List price:
                                  $7,95 /each.
                                  Your price::
                                  2028349 SEKN1203AFN1 SEKN42AFN1 TTI25   4 12.7000 .5000 12.7000 .5000 1.6550 .0652 3.1800 .1250 1.6500 .0650 0.1400 .0055
                                    List price:
                                    $16,02 /each.
                                    Your price::
                                    2028350 SEKN1203AFN1 SEKN42AFN1 THM   4 12.7000 .5000 12.7000 .5000 1.6550 .0652 3.1800 .1250 1.6500 .0650 0.1400 .0055
                                      List price:
                                      $15,20 /each.
                                      Your price::
                                      2028352 SEKN1203AFN1 SEKN1203AFN1 TTM08   4 12.7000 .5000 12.7000 .5000 1.6550 .0652 3.1800 .1250 1.6500 .0650 0.1400 .0055
                                        List price:
                                        $15,20 /each.
                                        Your price::
                                        List price:
                                        Discount: %
                                        Your price::
                                        Replacement This item is no longer available
                                        Replacement Product Please contact customer service for assistance

                                        ORIGINAL PRODUCT

                                        General Milling Inserts

                                        TPKR -MS Inserts
                                        (4 Products)
                                        View Products
                                        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length Average Chip Thickness [HM] Average Chip Thickness [HM]
                                        4120195 TPKR1603PDRMS TPKR1603PDRMS WU20PM   3 9.5250 .3750 16.4980 .6495 3.1800 .1250 1.4000 .0551 0.0500 .0020
                                          List price:
                                          $7,31 /each.
                                          Your price::
                                          5107759 TPKR1603PDRMS TPKR1603PDRMS THM   3 9.5250 .3750 16.4980 .6495 3.1800 .1250 1.4000 .0551 0.0400 .0016
                                            List price:
                                            $7,10 /each.
                                            Your price::
                                            6901196 TPKR1603PDRMS TPKR32PDRMS WP35CM   3 9.5250 .3750 16.4980 .6495 3.1800 .1250 1.4000 .0551 0.0400 .0016
                                              List price:
                                              $17,47 /each.
                                              Your price::
                                              2014835 TPKR1603PDRMS TPKR1603PDRMS TTM08   3 9.5250 .3750 16.4980 .6495 3.1800 .1250 1.4000 .0551 0.1000 .0039
                                                List price:
                                                $12,91 /each.
                                                Your price::
                                                List price:
                                                Discount: %
                                                Your price::
                                                Replacement This item is no longer available
                                                Replacement Product Please contact customer service for assistance

                                                ORIGINAL PRODUCT

                                                General Milling Inserts

                                                ISO Inserts • APPT-MM
                                                (3 Products)
                                                View Products
                                                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [W] Insert Width [W] Insert Width [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                6820930 APPT100308PDSRMM APPT100308PDSRMM WU20PM   2 11.1020 .4371 3.5600 .1400 6.7000 .2631     0.8000 .0312 0.0725 .0029
                                                  List price:
                                                  $5,09 /each.
                                                  Your price::
                                                  4169133 APPT100308SRMM APPT100308SRMM TN6540   2 11.1400 .4390 3.5600 .1400 6.7000 .2638 1.0000 .0390 0.8000 .0310 0.1300 .0050
                                                    List price:
                                                    $17,80 /each.
                                                    Your price::
                                                    6443662 APPT160408PDSRMM APPT160408PDSRMM WU20PM   2 17.2000 .6770 5.2600 .2070 9.4100 .3710 1.4900 .0590 0.7900 .0310 0.0550 .0022
                                                      List price:
                                                      $7,53 /each.
                                                      Your price::
                                                      List price:
                                                      Discount: %
                                                      Your price::
                                                      Replacement This item is no longer available
                                                      Replacement Product Please contact customer service for assistance

                                                      ORIGINAL PRODUCT

                                                      General Milling Inserts

                                                      ISO Inserts • TPAN
                                                      (17 Products)
                                                      View Products
                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                      2557715 TPAN1103PPN TPAN1103PPN WU20PM   3 6.3500 .2500 10.9620 .4316 3.1800 .1250 0.7100 .0280 0.0400 .0016
                                                        List price:
                                                        $7,53 /each.
                                                        Your price::
                                                        2557665 TPAN1603PPN TPAN1603PPN WU20PM   3 9.5200 .3750 16.4530 .6478 3.1800 .1250 1.1700 .0462 0.0450 .0018
                                                          List price:
                                                          $8,06 /each.
                                                          Your price::
                                                          2557685 TPAN1603PPN TPAN1603PPN THM   3 9.5200 .3750 16.4530 .6478 3.1800 .1250 1.1700 .0462 0.0200 .0008
                                                            List price:
                                                            $7,84 /each.
                                                            Your price::
                                                            2557789 TPAN2204PDR TPAN2204PDR WU20PM   3 12.7000 .5000 21.9610 .8646 4.7600 .1875 1.3500 .0533 0.0650 .0026
                                                              List price:
                                                              $9,43 /each.
                                                              Your price::
                                                              2557814 TPAN2204PDR TPAN2204PDR THM   3 12.7000 .5000 21.9610 .8646 4.7600 .1875 1.3500 .0533 0.0200 .0008
                                                                List price:
                                                                $9,22 /each.
                                                                Your price::
                                                                2557645 TPAN2204PPN TPAN2204PPN THM   3 12.7000 .5000 21.9610 .8646 4.7600 .1875 1.2400 .0487 0.0200 .0008
                                                                  List price:
                                                                  $9,22 /each.
                                                                  Your price::
                                                                  List price:
                                                                  Discount: %
                                                                  Your price::
                                                                  Replacement This item is no longer available
                                                                  Replacement Product Please contact customer service for assistance

                                                                  ORIGINAL PRODUCT

                                                                  General Milling Inserts

                                                                  ISO Inserts • SPAN
                                                                  (5 Products)
                                                                  View Products
                                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                                  2557387 SPAN1203EDL SPAN1203EDL THM   4 12.7000 .5000 12.7000 .5000 3.1800 .1250 1.0280 .0405 0.0200 .0008
                                                                    List price:
                                                                    $7,42 /each.
                                                                    Your price::
                                                                    3997503 SPAN1203EDL SPAN1203EDL WU20PM   4 12.7000 .5000 12.7000 .5000 3.1800 .1250 1.0280 .0405 0.0500 .0020
                                                                      List price:
                                                                      $7,95 /each.
                                                                      Your price::
                                                                      2557482 SPAN1203EDR SPAN1203EDR THM   4 12.7000 .5000 12.7000 .5000 3.1800 .1250 1.0280 .0405 0.0200 .0008
                                                                        List price:
                                                                        $7,42 /each.
                                                                        Your price::
                                                                        2557457 SPAN1203EDR SPAN1203EDR WU20PM   4 12.7000 .5000 12.7000 .5000 3.1800 .1250 1.0280 .0405 0.0550 .0022
                                                                          List price:
                                                                          $7,95 /each.
                                                                          Your price::
                                                                          6877203 SPAN1203EDR SPAN1203EDR WP35CM   4 12.7000 .5000 12.7000 .5000 3.1800 .1250 1.0280 .0405 0.0500 .0020
                                                                            List price:
                                                                            $7,95 /each.
                                                                            Your price::
                                                                            List price:
                                                                            Discount: %
                                                                            Your price::
                                                                            Replacement This item is no longer available
                                                                            Replacement Product Please contact customer service for assistance

                                                                            ORIGINAL PRODUCT

                                                                            General Milling Inserts

                                                                            ISO Inserts • SPKR
                                                                            (4 Products)
                                                                            View Products
                                                                            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                                            2558319 SPKR1203EDLMS SPKR1203EDLMS WU20PM   4 12.7000 .5000 12.7000 .5000 3.1800 .1250 1.4000 .0551 1.6000 .0630 0.0450 .0018
                                                                              List price:
                                                                              $7,95 /each.
                                                                              Your price::
                                                                              2558333 SPKR1203EDLMS SPKR1203EDLMS THM   4 12.7000 .5000 12.7000 .5000 3.1800 .1250 1.4000 .0551 1.6000 .0630 0.0200 .0008
                                                                                List price:
                                                                                $6,89 /each.
                                                                                Your price::
                                                                                2561021 SPKR1203EDRMS SPKR1203EDRMS THM   4 12.7000 .5000 12.7000 .5000 3.1800 .1250 1.4000 .0551 1.6000 .0630 0.0200 .0008
                                                                                  List price:
                                                                                  $6,89 /each.
                                                                                  Your price::
                                                                                  2561005 SPKR1203EDRMS SPKR1203EDRMS WU20PM   4 12.7000 .5000 12.7000 .5000 3.1800 .1250 1.4000 .0551 1.6000 .0630 0.0450 .0018
                                                                                    List price:
                                                                                    $7,95 /each.
                                                                                    Your price::
                                                                                    List price:
                                                                                    Discount: %
                                                                                    Your price::
                                                                                    Replacement This item is no longer available
                                                                                    Replacement Product Please contact customer service for assistance

                                                                                    ORIGINAL PRODUCT

                                                                                    General Milling Inserts

                                                                                    ISO Inserts • SPCX
                                                                                    (2 Products)
                                                                                    View Products
                                                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                                                    2557024 SPCX1203EDL SPCX1203EDL THM-F   1 12.7000 .5000 15.0000 .5906 3.1800 .1250 0.0200 .0008
                                                                                      List price:
                                                                                      $10,07 /each.
                                                                                      Your price::
                                                                                      2557061 SPCX1203EDR SPCX1203EDR THM-F   1 12.7000 .5000 15.0000 .5906 3.1800 .1250 0.0200 .0008
                                                                                        List price:
                                                                                        $10,07 /each.
                                                                                        Your price::
                                                                                        List price:
                                                                                        Discount: %
                                                                                        Your price::
                                                                                        Replacement This item is no longer available
                                                                                        Replacement Product Please contact customer service for assistance

                                                                                        ORIGINAL PRODUCT

                                                                                        General Milling Inserts

                                                                                        ISO Inserts • LNCX
                                                                                        (3 Products)
                                                                                        View Products
                                                                                        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [W] Insert Width [W] Insert Width [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                                                        6852433 LNCX1806AZR11 LNCX1806AZR11 WP35CM   4 18.5000 .7280 6.4000 .2520 10.0000 .3937 2.1600 .0850 0.7500 .0300 0.0550 .0022
                                                                                          List price:
                                                                                          $15,90 /each.
                                                                                          Your price::
                                                                                          6140047 LNCX1806AZR11 LNCX1806AZR11 THM   4 18.5000 .7280 6.4000 .2520 10.0000 .3937 2.1600 .0850 0.7500 .0300 0.0200 .0008
                                                                                            List price:
                                                                                            $12,72 /each.
                                                                                            Your price::
                                                                                            5343199 LNCX1806AZR11 LNCX1806AZR11 WK15CM   4 18.5000 .7280 6.4000 .2520 10.0000 .3937 2.1600 .0850 0.7500 .0300 0.0500 .0020
                                                                                              List price:
                                                                                              $15,90 /each.
                                                                                              Your price::
                                                                                              List price:
                                                                                              Discount: %
                                                                                              Your price::
                                                                                              Replacement This item is no longer available
                                                                                              Replacement Product Please contact customer service for assistance

                                                                                              ORIGINAL PRODUCT

                                                                                              General Milling Inserts

                                                                                              ISO Inserts • RDMX
                                                                                              (2 Products)
                                                                                              View Products
                                                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                                                              2567081 RDMX10T3M0 RDMX10T3M0 WU20PM   1 10.0000 .3937 3.9700 .1563 0.0450 .0018
                                                                                                List price:
                                                                                                $4,77 /each.
                                                                                                Your price::
                                                                                                4147744 RDMX1604M0T RDMX1604M0T WU20PM   1 16.0000 .6299 4.7600 .1875 0.0550 .0022
                                                                                                  List price:
                                                                                                  $10,28 /each.
                                                                                                  Your price::
                                                                                                  List price:
                                                                                                  Discount: %
                                                                                                  Your price::
                                                                                                  Replacement This item is no longer available
                                                                                                  Replacement Product Please contact customer service for assistance

                                                                                                  ORIGINAL PRODUCT

                                                                                                  General Milling Inserts

                                                                                                  ISO Inserts • RPMW
                                                                                                  (2 Products)
                                                                                                  View Products
                                                                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [D] Insert IC Size