successfully added to cart
View Cart

Notifications

Mark all as read

Affordable Performance

The WCE 4-flute solid end milll is a general purpose tool featuring an advanced geometry to enable material versatility for end users seeking a cost-effective solution while machining small batches.

The WCE 4-flute geometry combines the asymmetrical index and variable helix features at an affordable price, ensuring material and application versatility while still performing demanding operations like full slots and heavy cuts.

Features and Benefits

  • Asymmetrical index to reduce vibrations
  • Variable Helix to reduce vibrations
  • Eccentric relief to enable multiple material machinability
  • Core Taper to increase stability and better chip evacuation

Take a look at our brochures for more information:

WCE 4-Flute End Mill (Inch)

View Brochure

WCE 4-Flute End Mill (Metric)

View Brochure
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (259)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (259)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (259)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (259)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (259)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (259)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (259)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (259)
  • M Stainless Steel (259)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (259)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (259)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (259)
  • K Cast Iron (259)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (259)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (259)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (259)
  • S High-Temp Alloys (259)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (259)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (259)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (259)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (259)
  • H Hardened Materials (259)
    • H1
      Hardened Materials 44-48 HRC
      (259)
    • H2
      Hardened Materials 48-55 HRC
      (259)
Applications
Applications
  • Pocket Helical Pocket Helical (238)
  • Pocket Milling Pocket Milling (238)
  • Profile Milling Profile Milling (24)
  • Ramping Ramping (235)
  • Shoulder Ball Nose Shoulder Ball Nose (24)
  • Shoulder Milling Shoulder Milling (259)
  • Shoulder Square End Shoulder Square End (235)
  • Slot Ball Nose Slot Ball Nose (24)
  • Slot Milling Slot Milling (259)
  • Slot Square End Slot Square End (235)
Cutting Diameter
Cutting Diameter
  • 0.1181 in (5)
  • 0.125 in (7)
  • 0.1575 in (6)
  • 0.1875 in (9)
  • 0.1969 in (9)
  • 0.2362 in (10)
  • 0.25 in (16)
  • 0.3125 in (16)
  • 0.315 in (11)
  • 0.375 in (19)
  • 0.3937 in (11)
  • 0.4375 in (6)
  • 0.4724 in (12)
  • 0.5 in (32)
  • 0.625 in (19)
  • 0.6299 in (11)
  • 0.75 in (25)
  • 0.7874 in (11)
  • 1.0 in (24)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 3.0 mm (5)
  • 3.175 mm (7)
  • 4.0 mm (6)
  • 4.763 mm (9)
  • 5.0 mm (9)
  • 6.0 mm (10)
  • 6.35 mm (16)
  • 7.938 mm (16)
  • 8.0 mm (11)
  • 9.525 mm (19)
  • 10.0 mm (11)
  • 11.113 mm (6)
  • 12.0 mm (12)
  • 12.7 mm (32)
  • 15.875 mm (19)
  • 16.0 mm (11)
  • 19.05 mm (25)
  • 20.0 mm (11)
  • 25.4 mm (24)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 6.35 mm (3)
  • 7.938 mm (4)
  • 8.0 mm (5)
  • 9.525 mm (5)
  • 11.0 mm (6)
  • 12.7 mm (15)
  • 13.0 mm (18)
  • 15.875 mm (13)
  • 19.0 mm (10)
  • 19.05 mm (17)
  • 22.0 mm (10)
  • 22.225 mm (15)
  • 25.4 mm (1)
  • 26.0 mm (11)
  • 31.75 mm (23)
  • 32.0 mm (12)
  • 38.0 mm (11)
  • 38.1 mm (26)
  • 41.275 mm (5)
  • 50.8 mm (14)
  • 51.0 mm (1)
  • 57.0 mm (2)
  • 57.15 mm (9)
  • 63.5 mm (6)
  • 76.2 mm (11)
  • 101.6 mm (6)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.25 in (3)
  • 0.3125 in (4)
  • 0.315 in (5)
  • 0.375 in (5)
  • 0.4331 in (6)
  • 0.5 in (15)
  • 0.5118 in (18)
  • 0.625 in (13)
  • 0.748 in (10)
  • 0.75 in (17)
  • 0.8661 in (10)
  • 0.875 in (15)
  • 1.0 in (1)
  • 1.0236 in (11)
  • 1.25 in (23)
  • 1.2598 in (12)
  • 1.4961 in (11)
  • 1.5 in (26)
  • 1.625 in (5)
  • 2.0 in (14)
  • 2.0079 in (1)
  • 2.2441 in (2)
  • 2.25 in (9)
  • 2.5 in (6)
  • 3.0 in (11)
  • 4.0 in (6)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.5906 in (1)
  • 0.6299 in (2)
  • 0.7087 in (5)
  • 0.8268 in (5)
  • 1.063 in (6)
  • 1.1811 in (2)
  • 1.2598 in (6)
  • 1.4961 in (7)
  • 1.7323 in (4)
  • 1.9685 in (2)
  • 2.0866 in (4)
Reach Min to Reach Max
Reach
Reach
  • 15.0 mm (1)
  • 16.0 mm (2)
  • 18.0 mm (5)
  • 21.0 mm (5)
  • 27.0 mm (6)
  • 30.0 mm (2)
  • 32.0 mm (6)
  • 38.0 mm (7)
  • 44.0 mm (4)
  • 50.0 mm (2)
  • 53.0 mm (4)
Reach Min to Reach Max
Connection Style
Connection Style
  • Straight-Cylindrical (134)
  • Weldon (125)
Corner configuration
Corner Style
Corner Style
  • BALL NOSE (24)
  • CHAMFER (56)
  • RADIUS (130)
  • SQUARE END (49)
Corner Radius
Corner Radius
  • 0.0 in (105)
  • 0.0079 in (3)
  • 0.015 in (13)
  • 0.0197 in (6)
  • 0.03 in (28)
  • 0.0394 in (7)
  • 0.0591 in (4)
  • 0.06 in (26)
  • 0.0625 in (1)
  • 0.0787 in (5)
  • 0.09 in (16)
  • 0.0938 in (1)
  • 0.0984 in (2)
  • 0.1181 in (4)
  • 0.12 in (17)
  • 0.125 in (1)
  • 0.1563 in (1)
  • 0.1575 in (5)
  • 0.1875 in (1)
  • 0.1969 in (2)
  • 0.2362 in (2)
  • 0.25 in (2)
  • 0.3125 in (1)
  • 0.315 in (2)
  • 0.375 in (1)
  • 0.3937 in (2)
  • 0.5 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (105)
  • 0.2 mm (3)
  • 0.381 mm (13)
  • 0.5 mm (6)
  • 0.762 mm (28)
  • 1.0 mm (7)
  • 1.5 mm (4)
  • 1.524 mm (26)
  • 1.588 mm (1)
  • 2.0 mm (5)
  • 2.286 mm (16)
  • 2.381 mm (1)
  • 2.5 mm (2)
  • 3.0 mm (4)
  • 3.048 mm (17)
  • 3.175 mm (1)
  • 3.969 mm (1)
  • 4.0 mm (5)
  • 4.763 mm (1)
  • 5.0 mm (2)
  • 6.0 mm (2)
  • 6.35 mm (2)
  • 7.938 mm (1)
  • 8.0 mm (2)
  • 9.525 mm (1)
  • 10.0 mm (2)
  • 12.7 mm (1)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (203)
  • 0.2 mm (4)
  • 0.254 mm (4)
  • 0.3 mm (2)
  • 0.4 mm (6)
  • 0.406 mm (6)
  • 0.5 mm (12)
  • 0.508 mm (22)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (203)
  • 0.0079 in (4)
  • 0.01 in (4)
  • 0.0118 in (2)
  • 0.0157 in (6)
  • 0.016 in (6)
  • 0.0197 in (12)
  • 0.02 in (22)
Corner Chamfer Min to Corner Chamfer Max
Application
Rough Finish
Rough Finish
  • F (255)
Front-End
Neck Diameter
Neck Diameter
  • 0.111 in (1)
  • 0.148 in (2)
  • 0.185 in (5)
  • 0.222 in (5)
  • 0.2961 in (6)
  • 0.3701 in (6)
  • 0.4441 in (7)
  • 0.5921 in (6)
  • 0.7402 in (6)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 2.82 mm (1)
  • 3.76 mm (2)
  • 4.7 mm (5)
  • 5.64 mm (5)
  • 7.52 mm (6)
  • 9.4 mm (6)
  • 11.28 mm (7)
  • 15.04 mm (6)
  • 18.8 mm (6)
Neck Diameter Min to Neck Diameter Max
Back-End
Back-End Diameter
Back-End Diameter
  • 3.175 mm (7)
  • 4.763 mm (9)
  • 6.0 mm (30)
  • 6.35 mm (16)
  • 7.938 mm (16)
  • 8.0 mm (11)
  • 9.525 mm (19)
  • 10.0 mm (11)
  • 11.113 mm (6)
  • 12.0 mm (12)
  • 12.7 mm (32)
  • 15.875 mm (19)
  • 16.0 mm (11)
  • 19.05 mm (25)
  • 20.0 mm (11)
  • 25.4 mm (24)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.125 in (7)
  • 0.1875 in (9)
  • 0.2362 in (30)
  • 0.25 in (16)
  • 0.3125 in (16)
  • 0.315 in (11)
  • 0.375 in (19)
  • 0.3937 in (11)
  • 0.4375 in (6)
  • 0.4724 in (12)
  • 0.5 in (32)
  • 0.625 in (19)
  • 0.6299 in (11)
  • 0.75 in (25)
  • 0.7874 in (11)
  • 1.0 in (24)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Versatile Solid Carbide End Mills • WCE4

WCE4 • Chamfered • 4 Flute • Cylindrical Shank • Inch
(6 Products)
  • Corner Style: Corner ChamferCorner Style: Corner Chamfer
  • Shank - Cylindrical  Plain ≤h6Shank - Cylindrical Plain ≤h6
  • Helix Angle: X°Helix Angle: X°
  • Helical MillingHelical Milling
  • Ramping: BlankRamping: Blank
  • Slotting: Square EndSlotting: Square End
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [BCH] Corner Chamfer Width [BCH] Corner Chamfer Width [Z] Number of Flutes
6945919 W411E03010CHT W411E03010CHT WU20PE Straight-Cylindrical 3.1750 .1250 3.175 .125 12.7000 .5000 50.8000 2.000 0.2540 .0100 4
    List price:
    $14.64 /each.
    Your price::
    Qty
    6945599 W411E05011CHT W411E05011CHT WU20PE Straight-Cylindrical 4.7630 .1875 4.763 .1875 15.8750 .6250 57.1500 2.250 0.2540 .0100 4
      List price:
      $14.64 /each.
      Your price::
      Qty
      6945600 W411E07013CYT W411E07013CYT WU20PE Straight-Cylindrical 6.3500 .2500 6.35 .25 19.0500 .7500 63.5000 2.500 0.4060 .0160 4
        List price:
        $19.86 /each.
        Your price::
        Qty
        6945589 W411E08014CYT W411E08014CYT WU20PE Straight-Cylindrical 7.9380 .3125 7.938 .3125 19.0500 .7500 63.5000 2.500 0.4060 .0160 4
          List price:
          $28.48 /each.
          Your price::
          Qty
          6945590 W411E10015CTT W411E10015CTT WU20PE Straight-Cylindrical 9.5250 .3750 9.525 .375 22.2250 .8750 63.5000 2.500 0.5080 .0200 4
            List price:
            $34.44 /each.
            Your price::
            Qty
            6945725 W411E1101DCTT W411E1101DCTT WU20PE Straight-Cylindrical 11.1130 .4375 11.113 .4375 22.2250 .8750 63.5000 2.500 0.5080 .0200 4
              List price:
              $41.36 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Versatile Solid Carbide End Mills • WCE4

              WCE4 • Radiused • 4 Flute • Cylindrical Shank • Inch
              (13 Products)
              • Corner Style: Corner RadiusCorner Style: Corner Radius
              • Shank - Cylindrical  Plain ≤h6Shank - Cylindrical Plain ≤h6
              • Helix Angle: X°Helix Angle: X°
              • Helical MillingHelical Milling
              • Ramping: BlankRamping: Blank
              • Slotting: Square EndSlotting: Square End
              • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Re] Corner Radius [Re] Corner Radius [Z] Number of Flutes
              6945654 W411E05011RAT W411E05011RAT WU20PE Straight-Cylindrical 4.7630 .1875 4.763 .1875 15.8750 .6250 57.1500 2.250 0.3810 .0150 4
                List price:
                $16.10 /each.
                Your price::
                Qty
                6945655 W411E05011RET W411E05011RET WU20PE Straight-Cylindrical 4.7630 .1875 4.763 .1875 15.8750 .6250 57.1500 2.250 0.7620 .0300 4
                  List price:
                  $16.10 /each.
                  Your price::
                  Qty
                  6945656 W411E07013RAT W411E07013RAT WU20PE Straight-Cylindrical 6.3500 .2500 6.35 .25 19.0500 .7500 63.5000 2.500 0.3810 .0150 4
                    List price:
                    $21.84 /each.
                    Your price::
                    Qty
                    6945657 W411E07013RET W411E07013RET WU20PE Straight-Cylindrical 6.3500 .2500 6.35 .25 19.0500 .7500 63.5000 2.500 0.7620 .0300 4
                      List price:
                      $21.84 /each.
                      Your price::
                      Qty
                      6945658 W411E07013RGT W411E07013RGT WU20PE Straight-Cylindrical 6.3500 .2500 6.35 .25 19.0500 .7500 63.5000 2.500 1.5240 .0600 4
                        List price:
                        $21.84 /each.
                        Your price::
                        Qty
                        6945679 W411E10015RAT W411E10015RAT WU20PE Straight-Cylindrical 9.5250 .3750 9.525 .375 22.2250 .8750 63.5000 2.500 0.3810 .0150 4
                          List price:
                          $37.88 /each.
                          Your price::
                          Qty
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty

                          Sold in pkg. of

                          ORIGINAL PRODUCT

                          Versatile Solid Carbide End Mills • WCE4

                          WCE4 • Chamfered • 4 Flute • Cylindrical Shank • Inch
                          (6 Products)
                          • Corner Style: Corner ChamferCorner Style: Corner Chamfer
                          • Shank - Cylindrical  Plain ≤h6Shank - Cylindrical Plain ≤h6
                          • Helix Angle: X°Helix Angle: X°
                          • Helical MillingHelical Milling
                          • Ramping: BlankRamping: Blank
                          • Slotting: Square EndSlotting: Square End
                          • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [BCH] Corner Chamfer Width [BCH] Corner Chamfer Width [Z] Number of Flutes
                          6945596 W401E03000CHT W401E03000CHT WU20PE Straight-Cylindrical 3.1750 .1250 3.175 .125 6.3500 .2500 38.1000 1.500 0.2540 .0100 4
                            List price:
                            $10.32 /each.
                            Your price::
                            Qty
                            6945597 W401E05001CHT W401E05001CHT WU20PE Straight-Cylindrical 4.7630 .1875 4.763 .1875 7.9380 .3125 50.8000 2.000 0.2540 .0100 4
                              List price:
                              $10.32 /each.
                              Your price::
                              Qty
                              6945598 W401E07003CYT W401E07003CYT WU20PE Straight-Cylindrical 6.3500 .2500 6.35 .25 9.5250 .3750 50.8000 2.000 0.4060 .0160 4
                                List price:
                                $17.49 /each.
                                Your price::
                                Qty
                                6945587 W401E08004CYT W401E08004CYT WU20PE Straight-Cylindrical 7.9380 .3125 7.938 .3125 12.7000 .5000 50.8000 2.000 0.4060 .0160 4
                                  List price:
                                  $24.16 /each.
                                  Your price::
                                  Qty
                                  6945588 W401E10005CTT W401E10005CTT WU20PE Straight-Cylindrical 9.5250 .3750 9.525 .375 12.7000 .5000 50.8000 2.000 0.5080 .0200 4
                                    List price:
                                    $28.00 /each.
                                    Your price::
                                    Qty
                                    6945720 W401E1100DCTT W401E1100DCTT WU20PE Straight-Cylindrical 11.1130 .4375 11.113 .4375 15.8750 .6250 63.5000 2.500 0.5080 .0200 4
                                      List price:
                                      $41.52 /each.
                                      Your price::
                                      Qty
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty

                                      Sold in pkg. of

                                      ORIGINAL PRODUCT

                                      Versatile Solid Carbide End Mills • WCE4

                                      WCE4 • Chamfered • 4 Flute • Long Length • Cylindrical Shank • Metric
                                      (6 Products)
                                      • Corner Style: Corner ChamferCorner Style: Corner Chamfer
                                      • Shank - Cylindrical  Plain ≤h6Shank - Cylindrical Plain ≤h6
                                      • Helix Angle: X°Helix Angle: X°
                                      • Helical MillingHelical Milling
                                      • Ramping: BlankRamping: Blank
                                      • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [BCH] Corner Chamfer Width [BCH] Corner Chamfer Width [Z] Number of Flutes
                                      6946013 W411M06013CAT W411M06013CAT WU20PE Straight-Cylindrical 6.0000 .2362 6.0 .2362 32.0000 1.259 76.0000 2.992 0.4000 .0157 4
                                        List price:
                                        $28.92 /each.
                                        Your price::
                                        Qty
                                        6946014 W411M08014CAT W411M08014CAT WU20PE Straight-Cylindrical 8.0000 .3150 8.0 .315 32.0000 1.259 87.0000 3.425 0.4000 .0157 4
                                          List price:
                                          $37.17 /each.
                                          Your price::
                                          Qty
                                          6946015 W411M10015CET W411M10015CET WU20PE Straight-Cylindrical 10.0000 .3937 10.0 .3937 38.0000 1.496 89.0000 3.503 0.5000 .0197 4
                                            List price:
                                            $50.41 /each.
                                            Your price::
                                            Qty
                                            6946046 W411M12016CET W411M12016CET WU20PE Straight-Cylindrical 12.0000 .4724 12.0 .4724 51.0000 2.007 100.0000 3.937 0.5000 .0197 4
                                              List price:
                                              $58.33 /each.
                                              Your price::
                                              Qty
                                              6946047 W411M16018CET W411M16018CET WU20PE Straight-Cylindrical 16.0000 .6299 16.0 .6299 57.0000 2.244 125.0000 4.921 0.5000 .0197 4
                                                List price:
                                                $144.40 /each.
                                                Your price::
                                                Qty
                                                6946048 W411M20019CET W411M20019CET WU20PE Straight-Cylindrical 20.0000 .7874 20.0 .7874 57.0000 2.244 125.0000 4.921 0.5000 .0197 4
                                                  List price:
                                                  $186.74 /each.
                                                  Your price::
                                                  Qty
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is not available
                                                  Replacement Product This item may be available through a distributor
                                                  Qty

                                                  Sold in pkg. of

                                                  ORIGINAL PRODUCT

                                                  Versatile Solid Carbide End Mills • WCE4

                                                  WCE4 • Chamfered • 4 Flute • Cylindrical Shank • Metric
                                                  (9 Products)
                                                  • Corner Style: Corner ChamferCorner Style: Corner Chamfer
                                                  • Shank - Cylindrical  Plain ≤h6Shank - Cylindrical Plain ≤h6
                                                  • Helix Angle: X°Helix Angle: X°
                                                  • Helical MillingHelical Milling
                                                  • Ramping: BlankRamping: Blank
                                                  • Slotting: Square EndSlotting: Square End
                                                  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [BCH] Corner Chamfer Width [BCH] Corner Chamfer Width [Z] Number of Flutes
                                                  6945506 W401M03003CAT W401M03003CAT WU20PE Straight-Cylindrical 3.0000 .1181 6.0 .2362 8.0000 .3150 57.0000 2.244 0.2000 .0079 4
                                                    List price:
                                                    $25.15 /each.
                                                    Your price::
                                                    Qty
                                                    6945507 W401M04003CAT W401M04003CAT WU20PE Straight-Cylindrical 4.0000 .1575 6.0 .2362 11.0000 .4331 57.0000 2.244 0.2000 .0079 4
                                                      List price:
                                                      $25.15 /each.
                                                      Your price::
                                                      Qty
                                                      6945508 W401M05003CAT W401M05003CAT WU20PE Straight-Cylindrical 5.0000 .1969 6.0 .2362 13.0000 .5118 57.0000 2.244 0.3000 .0118 4
                                                        List price:
                                                        $25.15 /each.
                                                        Your price::
                                                        Qty
                                                        6945509 W401M06003CAT W401M06003CAT WU20PE Straight-Cylindrical 6.0000 .2362 6.0 .2362 13.0000 .5118 57.0000 2.244 0.4000 .0157 4
                                                          List price:
                                                          $25.15 /each.
                                                          Your price::
                                                          Qty
                                                          6945550 W401M08004CAT W401M08004CAT WU20PE Straight-Cylindrical 8.0000 .3150 8.0 .315 19.0000 .7480 63.0000 2.480 0.4000 .0157 4
                                                            List price:
                                                            $32.32 /each.
                                                            Your price::
                                                            Qty
                                                            6945561 W401M10005CET W401M10005CET WU20PE Straight-Cylindrical 10.0000 .3937 10.0 .3937 22.0000 .8661 72.0000 2.834 0.5000 .0197 4
                                                              List price:
                                                              $43.84 /each.
                                                              Your price::
                                                              Qty
                                                              List price:
                                                              Discount: %
                                                              Your price::
                                                              Replacement This item is not available
                                                              Replacement Product This item may be available through a distributor
                                                              Qty

                                                              Sold in pkg. of

                                                              ORIGINAL PRODUCT

                                                              Versatile Solid Carbide End Mills • WCE4

                                                              WCE4 • Sharp Edge • 4 Flute • Weldon® Shank • Metric
                                                              (9 Products)
                                                              • Corner Style: Square EndCorner Style: Square End
                                                              • Shank - Cylindrical  WeldonShank - Cylindrical Weldon
                                                              • Helix Angle: X°Helix Angle: X°
                                                              • Helical MillingHelical Milling
                                                              • Ramping: BlankRamping: Blank
                                                              • Slotting: Square EndSlotting: Square End
                                                              • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                                                              View Products
                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Z] Number of Flutes
                                                              6945510 W401M03003SZW W401M03003SZW WU20PE Weldon 3.0000 .1181 6.0 .2362 8.0000 .3150 57.0000 2.244 4
                                                                List price:
                                                                $26.15 /each.
                                                                Your price::
                                                                Qty
                                                                6945541 W401M04003SZW W401M04003SZW WU20PE Weldon 4.0000 .1575 6.0 .2362 11.0000 .4331 57.0000 2.244 4
                                                                  List price:
                                                                  $26.15 /each.
                                                                  Your price::
                                                                  Qty
                                                                  6945542 W401M05003SZW W401M05003SZW WU20PE Weldon 5.0000 .1969 6.0 .2362 13.0000 .5118 57.0000 2.244 4
                                                                    List price:
                                                                    $26.15 /each.
                                                                    Your price::
                                                                    Qty
                                                                    6945543 W401M06003SZW W401M06003SZW WU20PE Weldon 6.0000 .2362 6.0 .2362 13.0000 .5118 57.0000 2.244 4
                                                                      List price:
                                                                      $26.15 /each.
                                                                      Your price::
                                                                      Qty
                                                                      6945562 W401M08004SZW W401M08004SZW WU20PE Weldon