WMT Integral Toolholders

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (201)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (201)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (201)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (201)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (201)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (201)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (201)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (201)
  • M Stainless Steel (201)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (201)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (201)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (201)
  • K Cast Iron (201)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (201)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (201)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (201)
  • N Non-Ferrous Materials (201)
    • N1
      Wrought Aluminum (201)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (201)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (201)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (201)
    • N6
      Carbon, Graphite Composites, CFRP (201)
  • S High-Temp Alloys (201)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (201)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (201)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (201)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (201)
  • H Hardened Materials (183)
    • H1
      Hardened Materials 44-48 HRC (183)
    • H2
      Hardened Materials 48-55 HRC (183)
Select All Star
  • CN (40)
  • DE (73)
  • IN (28)
  • SG (10)
  • US (39)
Applications
Applications
  • Cut-Off Cut-Off (110)
  • Face Grooving Face Grooving (25)
  • Grooving Grooving (168)
  • ID Grooving ID Grooving (30)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (201)
  • Lightly Interrupted Cut (201)
  • Smooth Cut (183)
  • Varying Depth of Cut (183)
Connection Style
Connection Style
  • Boring Bar Shank (30)
  • Toolholder (177)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 2.0 (202)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 3.938 in (13)
  • 4.5 in (13)
  • 4.921 in (34)
  • 5.0 in (31)
  • 5.5 in (2)
  • 5.513 in (2)
  • 5.906 in (53)
  • 6.0 in (29)
  • 7.875 in (4)
  • 8.0 in (4)
  • 9.843 in (8)
  • 10.0 in (7)
  • 11.811 in (3)
  • 11.817 in (1)
  • 12.0 in (3)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 100.0 mm (13)
  • 114.301 mm (13)
  • 125.0 mm (34)
  • 127.0 mm (31)
  • 139.701 mm (2)
  • 140.0 mm (2)
  • 150.0 mm (53)
  • 152.4 mm (29)
  • 200.0 mm (4)
  • 203.201 mm (4)
  • 250.0 mm (8)
  • 254.0 mm (7)
  • 300.0 mm (3)
  • 300.151 mm (1)
  • 304.8 mm (3)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.003 in (54)
  • 0.005 in (17)
  • 0.006 in (52)
  • 0.007 in (68)
  • 0.01 in (108)
  • 0.012 in (131)
  • 0.015 in (17)
  • 0.023 in (23)
  • 0.024 in (131)
  • 0.03 in (131)
  • 0.06 in (57)
  • 0.079 in (23)
  • 0.08 in (23)
  • 0.095 in (28)
  • 0.098 in (28)
  • 0.099 in (28)
  • 0.119 in (23)
  • 0.12 in (23)
  • 0.125 in (23)
  • 0.156 in (12)
  • 0.157 in (12)
  • 0.158 in (12)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.076 mm (54)
  • 0.125 mm (17)
  • 0.151 mm (52)
  • 0.176 mm (68)
  • 0.225 mm (45)
  • 0.25 mm (108)
  • 0.301 mm (131)
  • 0.375 mm (17)
  • 0.576 mm (23)
  • 0.601 mm (131)
  • 0.75 mm (131)
  • 1.5 mm (57)
  • 1.526 mm (45)
  • 2.0 mm (23)
  • 2.025 mm (23)
  • 2.401 mm (28)
  • 2.5 mm (28)
  • 2.526 mm (28)
  • 3.0 mm (23)
  • 3.026 mm (23)
  • 3.176 mm (23)
  • 3.95 mm (12)
  • 4.0 mm (12)
  • 4.025 mm (12)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • TN6026 (1)
  • WP10CT (166)
  • WP25CT (166)
  • WU10HT (96)
  • WU10PT (183)
  • WU25PT (201)
Hand Of Tool
Hand Of Tool
  • L (95)
  • R (112)
Wiper Insert
Wiper Insert
  • N (202)
  • Y (138)
F Dimension
F Dimension
  • 9.525 mm (5)
  • 10.0 mm (4)
  • 11.951 mm (2)
  • 12.0 mm (7)
  • 12.701 mm (8)
  • 15.851 mm (4)
  • 15.875 mm (6)
  • 15.9 mm (1)
  • 15.951 mm (2)
  • 15.976 mm (2)
  • 16.0 mm (14)
  • 19.05 mm (18)
  • 19.151 mm (2)
  • 19.951 mm (2)
  • 20.0 mm (18)
  • 24.951 mm (1)
  • 25.0 mm (42)
  • 25.151 mm (2)
  • 25.401 mm (19)
  • 25.425 mm (1)
  • 25.451 mm (1)
  • 25.5 mm (3)
  • 26.0 mm (8)
  • 29.0 mm (15)
  • 31.75 mm (4)
  • 32.0 mm (9)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.375 in (5)
  • 0.394 in (4)
  • 0.472 in (2)
  • 0.473 in (7)
  • 0.5 in (8)
  • 0.624 in (4)
  • 0.625 in (6)
  • 0.626 in (1)
  • 0.628 in (2)
  • 0.629 in (2)
  • 0.63 in (14)
  • 0.75 in (18)
  • 0.754 in (2)
  • 0.785 in (2)
  • 0.787 in (18)
  • 0.982 in (1)
  • 0.984 in (42)
  • 0.99 in (2)
  • 1.0 in (19)
  • 1.002 in (2)
  • 1.004 in (3)
  • 1.024 in (8)
  • 1.143 in (15)
  • 1.25 in (4)
  • 1.26 in (9)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 32.0 mm (1)
  • 38.0 mm (2)
  • 40.401 mm (4)
  • 41.0 mm (4)
  • 47.0 mm (15)
  • 52.0 mm (4)
  • 54.0 mm (4)
  • 54.1 mm (3)
  • 69.851 mm (2)
  • 70.0 mm (8)
  • 100.0 mm (9)
  • 101.601 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.26 in (1)
  • 1.496 in (2)
  • 1.591 in (4)
  • 1.614 in (4)
  • 1.85 in (15)
  • 2.047 in (4)
  • 2.126 in (4)
  • 2.13 in (3)
  • 2.75 in (2)
  • 2.757 in (8)
  • 3.938 in (9)
  • 4.0 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.787 in (15)
  • 1.024 in (17)
  • 1.062 in (2)
  • 1.125 in (2)
  • 1.25 in (2)
  • 1.26 in (3)
  • 2.047 in (3)
  • 2.757 in (4)
  • 3.938 in (8)
  • 4.0 in (2)
  • 8.0 in (2)
  • 8.071 in (9)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 20.0 mm (15)
  • 26.0 mm (17)
  • 26.975 mm (2)
  • 28.576 mm (2)
  • 31.75 mm (2)
  • 32.0 mm (3)
  • 52.0 mm (3)
  • 70.0 mm (4)
  • 100.0 mm (8)
  • 101.601 mm (2)
  • 203.201 mm (2)
  • 205.0 mm (9)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (177)
  • S (30)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (30)
  • NEUTRAL (ZERO) (1)
Maximum Bore Depth
Maximum Bore Depth
  • 1.969 in (8)
  • 2.52 in (13)
  • 2.535 in (2)
  • 3.15 in (3)
  • 3.307 in (2)
  • 3.323 in (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 50.0 mm (8)
  • 64.0 mm (13)
  • 64.4 mm (2)
  • 80.0 mm (3)
  • 84.0 mm (2)
  • 84.4 mm (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (30)
Front-End
Clamp Style
Clamp Style
  • C (3)
  • S (4)
  • Y (185)
Cutting Width
Cutting Width
  • 0.06 in (18)
  • 0.079 in (36)
  • 0.084 in (35)
  • 0.094 in (17)
  • 0.095 in (17)
  • 0.119 in (45)
  • 0.123 in (45)
  • 0.125 in (45)
  • 0.156 in (23)
  • 0.157 in (23)
  • 0.162 in (23)
  • 0.187 in (28)
  • 0.188 in (28)
  • 0.197 in (28)
  • 0.202 in (28)
  • 0.237 in (23)
  • 0.241 in (23)
  • 0.249 in (23)
  • 0.25 in (23)
  • 0.312 in (12)
  • 0.313 in (12)
  • 0.315 in (12)
  • 0.32 in (12)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.5 mm (18)
  • 2.0 mm (36)
  • 2.125 mm (35)
  • 2.375 mm (17)
  • 2.401 mm (17)
  • 3.0 mm (45)
  • 3.125 mm (45)
  • 3.176 mm (45)
  • 3.95 mm (23)
  • 4.0 mm (23)
  • 4.125 mm (23)
  • 4.75 mm (28)
  • 4.775 mm (28)
  • 5.0 mm (28)
  • 5.125 mm (28)
  • 6.0 mm (23)
  • 6.125 mm (23)
  • 6.325 mm (23)
  • 6.351 mm (23)
  • 7.926 mm (12)
  • 7.95 mm (12)
  • 8.0 mm (12)
  • 8.125 mm (12)
Cutting Width Min to Cutting Width Max
Insert Size
Insert Size
  • 1 (18)
  • 2 (32)
  • 2B (18)
  • 3 (45)
  • 4 (27)
  • 5 (29)
  • 6 (23)
  • 8 (12)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.394 in (15)
  • 0.42 in (3)
  • 0.433 in (11)
  • 0.44 in (8)
  • 0.492 in (1)
  • 0.512 in (19)
  • 0.531 in (2)
  • 0.551 in (12)
  • 0.56 in (9)
  • 0.564 in (2)
  • 0.61 in (2)
  • 0.625 in (5)
  • 0.63 in (15)
  • 0.65 in (16)
  • 0.728 in (2)
  • 0.748 in (20)
  • 0.75 in (10)
  • 0.866 in (19)
  • 0.875 in (8)
  • 0.945 in (5)
  • 0.984 in (12)
  • 1.0 in (11)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 10.0 mm (15)
  • 10.675 mm (3)
  • 11.0 mm (11)
  • 11.175 mm (8)
  • 12.5 mm (1)
  • 13.0 mm (19)
  • 13.5 mm (2)
  • 14.0 mm (12)
  • 14.226 mm (9)
  • 14.3 mm (2)
  • 15.5 mm (2)
  • 15.875 mm (5)
  • 16.0 mm (15)
  • 16.5 mm (16)
  • 18.5 mm (2)
  • 19.0 mm (20)
  • 19.05 mm (10)
  • 22.0 mm (19)
  • 22.225 mm (8)
  • 23.975 mm (5)
  • 25.0 mm (12)
  • 25.401 mm (11)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • H W (202)
Back-End
Connection Type
Connection Type
  • BORING BAR (30)
  • SQUARE SHANK (172)
Back-End Diameter
Back-End Diameter
  • 25.0 mm (4)
  • 25.401 mm (4)
  • 31.701 mm (1)
  • 31.75 mm (6)
  • 32.0 mm (8)
  • 38.1 mm (3)
  • 40.0 mm (4)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.984 in (4)
  • 1.0 in (4)
  • 1.248 in (1)
  • 1.25 in (6)
  • 1.26 in (8)
  • 1.5 in (3)
  • 1.575 in (4)
Back-End Diameter Min to Back-End Diameter Max
Shank Height
Shank Height
  • 0.375 in (5)
  • 0.394 in (4)
  • 0.473 in (9)
  • 0.5 in (8)
  • 0.625 in (13)
  • 0.63 in (16)
  • 0.75 in (20)
  • 0.787 in (20)
  • 0.978 in (10)
  • 0.984 in (39)
  • 0.99 in (4)