M95 Series - Tool Bodies
Filtry
Filtry
Zobrazit filtry v
MetrickéPalcové
Workpiece Material
Workpiece Material
- P Steel (12)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(12)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(12)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(12)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(12)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(12)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(12)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(12)
- M Stainless Steel (12)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(12)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(12)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(12)
- K Cast Iron (12)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(12)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(12)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(12)
- N Non-Ferrous Materials (3)
- N1Wrought Aluminum (3)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(3)
- N3High-Silicon Aluminum Alloys Si >12.2%(3)
- S High-Temp Alloys (12)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(12)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(12)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(12)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(12)
Applications
Applications
Slot Milling (14)
Slot Side (14)
Cutting Diameter
Cutting Diameter
- 3.938 in(4)
- 4.921 in(4)
- 6.299 in(4)
- 7.875 in(2)
komu
Cutting Diameter
Cutting Diameter
- 100.0 mm(4)
- 125.0 mm(4)
- 160.0 mm(4)
- 200.0 mm(2)
komu
Cutting Length
Cutting Length
- 4.0 mm(2)
- 6.0 mm(2)
- 7.0 mm(3)
- 8.0 mm(4)
- 10.0 mm(3)
komu
Cutting Length
Cutting Length
- 0.157 in(2)
- 0.237 in(2)
- 0.276 in(3)
- 0.315 in(4)
- 0.394 in(3)
komu
Number of Flutes
Number of Flutes
- 3 (2)
- 4 (2)
- 5 (3)
- 6 (4)
- 8 (1)
- 9 (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 4.0 (12)
komu
Corner Radius
Corner Radius
- 0.0 in(12)
komu
Corner Radius
Corner Radius
- 0.0 mm(12)
komu
Corner Chamfer
Corner Chamfer
- 0.151 mm(12)
komu
Corner Chamfer
Corner Chamfer
- 0.006 in(12)
komu
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- THM (12)
- TN5515 (3)
- TN7525 (12)
- TTM09 (12)
- TTR (12)
- WK15CM (12)
- WP35CM (12)
- WP40PM (12)
frontEnd
Cutting Width
Cutting Width
- 0.157 in(2)
- 0.237 in(2)
- 0.276 in(3)
- 0.315 in(4)
- 0.394 in(3)
komu
Cutting Width
Cutting Width
- 4.0 mm(2)
- 6.0 mm(2)
- 7.0 mm(3)
- 8.0 mm(4)
- 10.0 mm(3)
komu
Insert Shape
Insert Shape
- S-SQUARE ON EDGE 90 (12)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.984 in(4)
- 1.28 in(4)
- 1.772 in(4)
- 2.48 in(2)
komu
Maximum Cutting Depth
Maximum Cutting Depth
- 25.0 mm(4)
- 32.5 mm(4)
- 45.0 mm(4)
- 63.0 mm(2)
komu
backEnd
Back-End Diameter
Back-End Diameter
- 27.0 mm(4)
- 40.0 mm(8)
- 50.0 mm(2)
komu
Back-End Diameter
Back-End Diameter
- 1.063 in(4)
- 1.575 in(8)
- 1.969 in(2)
komu
No filters matching ""
